Let's see some Kershaw's!
-
My slightly tuned Skyline gets more pocket time than anything else these days......

-
Nope, my pocket clip stands about 0.5mm proud of the scale and it's never been an issue.......probably my least problematic knife when it comes to climbing out of the pocket by itself when you sit down.....
Lock bar relief was further relieved to accommodate my fat fingers.
Disassembled, cleaned and lubed.......and the big one: secondary bevel increased to what Lansky says is 17 degrees.
Laser 
My current phone is jinxed, my first ever cracked screen, and then I dropped it a second time in 2 weeks......another crack and some structural damage.
Next day I realized one of the chassis screws was ripped out and preventing the cover from clipping back into place......used the Skyline as a screwdriver no worries

I'm slowly falling in love with 14C28N

-
@Gerhard Gerber said:
Nope, my pocket clip stands about 0.5mm proud of the scale and it's never been an issue.......probably my least problematic knife when it comes to climbing out of the pocket by itself when you sit down.....Lock bar relief was further relieved to accommodate my fat fingers.
Disassembled, cleaned and lubed.......and the big one: secondary bevel increased to what Lansky says is 17 degrees.
Laser 
My current phone is jinxed, my first ever cracked screen, and then I dropped it a second time in 2 weeks......another crack and some structural damage.
Next day I realized one of the chassis screws was ripped out and preventing the cover from clipping back into place......used the Skyline as a screwdriver no worries

I'm slowly falling in love with 14C28N

And that's why I always buy professional/industrial model phones even if the performance/features suck and they're bulky. My current one (Sonim Bolt) is supposedly able to be run over by a truck and still be unscathed. Unfortunately, the camera's a joke. Looks like something from a toy. One of those models with a better camera would be the Kyocera DuraXE. I've actually taken some photos for here on it (camera USB/Charging cable bit the dust), and they turned out quite good.
-
Blackwash Leek

-
@cody6268 said:
And that's why I always buy professional/industrial model phones even if the performance/features suck and they're bulky. My current one (Sonim Bolt) is supposedly able to be run over by a truck and still be unscathed. Unfortunately, the camera's a joke. Looks like something from a toy. One of those models with a better camera would be the Kyocera DuraXE. I've actually taken some photos for here on it (camera USB/Charging cable bit the dust), and they turned out quite good.I used to do that.......back when it made any sense. If I could afford iPhones I'd go that route.
You can run an Andriod phone as long as it lasts provided you don't load facebook and especially whatsapp, because this running out of storage space BS is simply planned obsolescence.
I'm sitting with a Samsung and LG phones in perfect working order, just not enough space for apps with the updates installed.
Apart from the phones being very expensive and basically disposable, I've found the contract option at my service provider is the best option, 2 year contract including a phone, I never use all my airtime so the phone is my single cheapest expense.
To give you an example, I'm about a year into the new contract, guesstimate I'd pay 25% the price of a crappy phone to buy out the remainder of my contract, renew and get a new phone.

-
My new favorite; the Concierge

-
Looks like it fits the hand very well. Pointy

-
Updating some of my previous Kershaws thoughts:
<u>Skyline</u>: carrying it a lot, flipping action has gotten much better and I really love the blade shape, exceedingly sharp and cuts amazing, however it is ripping the seam of my pocket badly.with the rough G10 and tight clip.
<u>Atmos</u>: still great, no complaints, highly recommended
A couple of cheapies I picked up in the past 2 months:
<u>Hotwire</u> - A $10 Walmart exclusive, not too bad for the price, has speedsafe assisted opening, on the small side, uneven grind and horrible tiny overtight pocketclip
<u>Cinder</u> - Tiny key chain sized knife was under $7, thumbstud a little hard to open with one hand, has an itsy bitsy liner lock, Love the tiny blade for opening clamshell packages and boxes
-
@Blackbeard said:
Updating some of my previous Kershaws thoughts:<u>Skyline</u>: carrying it a lot, flipping action has gotten much better and I really love the blade shape, exceedingly sharp and cuts amazing, however it is ripping the seam of my pocket badly.with the rough G10 and tight clip.
<u>Atmos</u>: still great, no complaints, highly recommended
A couple of cheapies I picked up in the past 2 months:
<u>Hotwire</u> - A $10 Walmart exclusive, not too bad for the price, has speedsafe assisted opening, on the small side, uneven grind and horrible tiny overtight pocketclip
<u>Cinder</u> - Tiny key chain sized knife was under $7, thumbstud a little hard to open with one hand, has an itsy bitsy liner lock, Love the tiny blade for opening clamshell packages and boxes
Thanks for the info, Blackbeard!

-
@Blackbeard said:
Updating some of my previous Kershaws thoughts:<u>Skyline</u>: carrying it a lot, flipping action has gotten much better and I really love the blade shape, exceedingly sharp and cuts amazing, however it is ripping the seam of my pocket badly.with the rough G10 and tight clip.
More and more this is just the knife I grab first. The G10 on mine is maybe a bit smoother after the mods I did, so fortunately my pockets are fine.
I got mine dirty recently and that affects the action, not a guaranteed flipper if you don't concentrate.
-
-
Nice one, Swinger!

Still need to get a Blur. :ahhh
-
Much as I love my Skyline, it's not a good flipper, and that's the only practical deployment method.
The Skyline get's more pocket time and use than any other knife I own for good reason, but now it's again at that point where you cannot pull it out of your pocket and just lazy lightswitch it open, it needs a wrist flick to lock.
I know a better arrangement of flipper tab to pivots can mostly solved that issue, but that's why I don't like flippers.
Still a favourite knife in so many ways
so conflicted :ahhh -
Give the atmos a try GG, it always opens and shakes closed perfectly, very lightweight a really nice knife.
-
@Blackbeard said:
Give the atmos a try GG, it always opens and shakes closed perfectly, very lightweight a really nice knife.I know it's a good knife, but the 8cr13 doesn't cut it with me anymore......not for actual use.
Skyline has a thin blade, excellent geometry and the 14C28 going for it.......

-
One of my favorites is a custom by JD Ellis in 14c28n.
He actually worked on the HT with info from Sandvik. Its top stuff.I guess BD1N is similar.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

