Any love for the Craftsman?
-
I could do that, but it would take time, and I'm not going to re-draft the entire page(s) on thin hopes that people understand and accept them. I already see a fair amount of resistance for an explanation that covers your original question about the Craftsman and Master Craftsman relationship. And this isn't over a brief time in history or 'one time' like you suggest...decades as far as I can tell from the catalogs available.
The other problem is that any edits I propose may require more than just single page edits, but major structural change for the site. I don't think anyone is interested in that.
Perhaps something more like this could be done for the 136ka:
SAKWiki | Victorinox Handyman 7236maU
SAKWiki - The online Swiss Army Knife Encyclopedia. Information and Identification on Swiss Army Knives by Victorinox and Wenger.
SAKWiki (sakwiki.com)
And the Handyman page that it points to:
https://sakwiki.com/tiki-index.php?page=Victorinox+Handyman...though it doesn't 'point back' at it (the 7236maU).
-
From the 50's 8 model catalog:

-
From the '54 brochure:

-
From the (early) '60s catalog:

-
The later '60s 26 model catalog just changes prices from the above to $18.50 and $16.20 respectively.
From the '76 dealer catalog:

-
@kamakiri said:
Because it's clearly and repeatedly called a Craftsman over decades in the known US catalogs.These "known US catalogs" also use the name Camper for the model 234U that most of us currently call Spartan. So? Also, the following page from a 1979 Hoffritz catalog shows that they used the name Craftsman for the model that we now call Explorer, the name Tinker for the 58mm model that we now call Classic, etc. Are we somehow obligated to adopt this as well? How?

So I'm not sure how this mistake was made
It's not a mistake. I'm sure that whoever introduced the name Artisan for the model 136k knew very well that this model was called Craftsmen in the "known US catalogs." They adopted a variation of that name to avoid confusion with the other models called Craftsman.
or propagated
It seems to have been adopted by the community because it makes sense.
-
I believe the Hoffritz models should be mentioned. As well as the BSA renaming examples. Isn't that what a Wiki is for? ...ALL the relevant and available info?
And I'm sure it is a mistake. On purpose or not. Mistake.
-
All right - Thanks for all the piccies - Great
And I reckon you have answered my question on Craftsman vs Master Craftsman - I never knew the 4 layer 84mm 'Artisan' was called a Craftsman in the US
In terms of Wiki changes this look fairly easy to fix for me - ..

You are right I would not want to completely restructure the Wiki pages - But these changes would at least partially *'fix' *and at least be a big improvement ...-
Explain that the model that we have listed as the Artisan was known as a Craftsman in the US - This is already there - But we could wordsmith it a bit!
-
Add in the old model numbers
-
Add in a some more cross references from the 84s to the 91s and vv
-
Add in some more references to the dealer catalogues and names!
-
Maybe put in some Name Disambiguation statements, like we have elsewhere, in the Craftsman/Artisan pages
The super confusing picture is this one
@kamakiri said:
The later '60s 26 model catalog just changes prices from the above to $18.50 and $16.20 respectively.
From the '76 dealer catalog:As this shows the six layer model - which we currently know as the Craftsman as the ***Master ***Craftsman - Oh Boy
As some of us have pointed out before - Don't you just love Vic's renaming!!I have thought about this before a bit, and it's only a problem now that 1.The world is a global market 2. There are us SAK collectors and enthusiasts around
At the time it probably made perfect sense to rename or reuse models
-
-

Sounds like reasonable changes without modifying the page structure. Thanks for taking the time to review what I posted.
@Huntsman said:
I have thought about this before a bit, and it's only a problem now that 1.The world is a global market 2. There are us SAK collectors and enthusiasts around
At the time it probably made perfect sense to rename or reuse models
Understood. This is one area that it makes it hard to organize or reorganize based on the various names. Knowing that some of the names were reused for both upgrades/layer additions and outright changes makes it difficult to keep the names straight when organizing by toolsets/layers/lengths and using name pages. I think the '79 Hoffritz info can be incorporated the same way.
Cross-referencing everything should work with the existing structure in the manner that you outlined. And should minimize the confusion going forward.
-
@Huntsman said:
All right - Thanks for all the piccies - GreatAnd I reckon you have answered my question on Craftsman vs Master Craftsman - I never knew the 4 layer 84mm 'Artisan' was called a Craftsman in the US
In terms of Wiki changes this look fairly easy to fix for me - ..

You are right I would not want to completely restructure the Wiki pages - But these changes would at least partially *'fix' *and at least be a big improvement ...- Explain that the model that we have listed as the Artisan was known as a Craftsman in the US - This is already there - But we could wordsmith it a bit!
- Add in the old model numbers
- Add in a some more cross references from the 84s to the 91s and vv
- Add in some more references to the dealer catalogues and names!
- Maybe put in some Name Disambiguation statements, like we have elsewhere, in the Craftsman/Artisan pages
I think the layout and revisions should mirror the Champion page as it deals with the history in a similar manner. Various layer configurations and about the same history range for the known catalogs.
https://sakwiki.com/tiki-index.php?page=ChampionMight be easier to start there as a lot of the same info applies regarding History, Model Names and Numbers.
-
From the bottom, c. '72 Master Craftsman, Early '60's Master Craftsman, c. '76 84mm 'Master Craftsman (Small)'

Has the SW29ARNB saw and an aluminum bird head spacer:


-
Wowzers, I never even knew that small '76 Master Craftsman even existed. I imagine they're ridiculously rare.
-
@Thunderpants said:
Wowzers, I never even knew that small '76 Master Craftsman even existed. I imagine they're ridiculously rare.And I have two... that one is a Hoffritz with a H/VSSR tang stamp. The other one I have is older with a Hoffritz (HSS/VOS) tang stamp and the forged+file phillips.
.....
Two more:
'46-'51 136ka Craftsman:




'61+ 136ka Craftsman:



with aluminum birdhead spacer and polished/angled/35 tooth saw -
Two more 136ka Craftsman mid and later '60s:

One with machined finish/angled 35T. Both have nickel silver bird head spacers.
-
@Huntsman said:
https://sakwiki.com/tiki-index.php?page=CraftsmanHistory section - If anyone knows better let me know and we'll update
Latest one I've found is '05+:


Stainless metal saw, 2.0mm tang, and the newer non-crossbow OS tang stamp with the 'big R' to end OFFICIER. So it could be as new as '11 afaik.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login