Leatherman Free P2/P4 Club and Feedback Thread
-
Sam would you carry this tool around the house for casual use? Is this a tool that on a off day would make a good companion?
-
@Aloha said:
Sam would you carry this tool around the house for casual use? Is this a tool that on a off day would make a good companion?I dun like to deploy the blade, I dislike snapping the pliers open, I am afraid to use the screw drivers. If I only need a scissor and a pry tool, short answer, still no. Sorry..
-
Well that stinks
. For the collection then.......... 
-
Something else to note on my sentiment towards this new Free series. I am not from the part of the world that have wonderful no question asked warranty on LMs. This is not on my retail shelves yet. If we are talking about a regular LM with regular parts, I will not be afraid to use it. I can even volunteer to test them till the point of failure, if I am drunk enough. The Free is a whole new thing altogether. New parts, new design. I know repairing them myself is definitely out of question and sending back for warranty will be another challenge. Maybe, those drivers can withstand a reasonable amount of torque. But by gut feel and common physics, that is not quite possible. Many so called "improvements" are unnecessary. That pliers snap lock, to me is a hindrance, even rolling the tools open hurts my thumb. etc etc.. But as much as I do not have a positive feeling towards it, this is by far the most interesting and a completely new design by a manufacturer in many years. They are now like starting from ground zero again. There's heaps of refinement to be done to make this a comfortable and true user's tool.
-
When/if my P4 has a failure, I'll report it. I just can't know a driver is weak without seeing it fail(whether it is mine or a significant number of reports). Reasonable use so far hasn't shown the drivers to be a problem. I don't believe that conjecture is equal to evaluation. :)
-
@Aloha said:
Well that stinks
. For the collection then.......... 
I wouldn't go that far ...
Yes, the Free P4 doesn't offer that sturdy "I can handle anything" feeling that the Wave/Charge gives you, but this does not mean it will certainly let you down when you use it. As others have said here before, as long as you understand that the Free is more of a "fun to play with" tool and not something that can replace the Wave/Charge, or Surge/ST300 while working a construction site, you'll be fine.
When you go for a hike in the outdoors, or a trip to the city and you just want to bring a tool in case you need to fix something along the way, like unscrewing the battery compartment from a certain device, or filing down a sharp edge on something that broke during you trip, or cutting a piece of metal wire to hold up the exhaust on your car to prevent it from dragging under your car all the way back ... you know, just one of those things that occasionally happen and which can ruin your day, I'm pretty sure the Free will deliver.
It's just not the tool to take with you when you know you're going to cut hardwire 2 hours in a row, or when you need to screw in 200 screws by hand, or ... You guys know what I mean, right ?
And for all you "tool-photographers" out there, it does make for some sweet pics. I would place it next to the classic Leatherman tools like the original Supertool, the PST, etc ... and the new "old style" tools like the Rebar and the ST300 (and once again, last but not least, the Swisstool) when it comes to being photogenic.
Spoiler:

And in my opinion, it is fun to play with, just as I like to play with my Gerber MP600 (sliding pliers
), or the mechanickal "bolt action rifle" clicks you get from opening and closing a Swisstool.Just my 2 cents ;).
-
@Top-Gear-24 said:
I wouldn't go that far ...Yes, the Free P4 doesn't offer that sturdy "I can handle anything" feeling that the Wave/Charge gives you, but this does not mean it will certainly let you down when you use it. As others have said here before, as long as you understand that the Free is more of a "fun to play with" tool and not something that can replace the Wave/Charge, or Surge/ST300 while working a construction site, you'll be fine.
When you go for a hike in the outdoors, or a trip to the city and you just want to bring a tool in case you need to fix something along the way, like unscrewing the battery compartment from a certain device, or filing down a sharp edge on something that broke during you trip, or cutting a piece of metal wire to hold up the exhaust on your car to prevent it from dragging under your car all the way back ... you know, just one of those things that occasionally happen and which can ruin your day, I'm pretty sure the Free will deliver.
It's just not the tool to take with you when you know you're going to cut hardwire 2 hours in a row, or when you need to screw in 200 screws by hand, or ... You guys know what I mean, right ?
And for all you "tool-photographers" out there, it does make for some sweet pics. I would place it next to the classic Leatherman tools like the original Supertool, the PST, etc ... and the new "old style" tools like the Rebar and the ST300 (and once again, last but not least, the Swisstool) when it comes to being photogenic.
Spoiler:

And in my opinion, it is fun to play with, just as I like to play with my Gerber MP600 (sliding pliers
), or the mechanickal "bolt action rifle" clicks you get from opening and closing a Swisstool.Just my 2 cents ;).
Well said, T-G!

And great pic! Indeed, it is a looker. Going to go get some pics in a bit. :)
-
Hard to get any pics without any shade today, but here are a few.




-
Thank you TG24. I wasn't generalizing I was more directing those comments to Sam ;). If the tool was going to be more for his collection purposes only based on his experiences so far.
I wholeheartedly agree this tool looks to be a fine tool. I like Sams follow up
. Since he is not able to take advantage of LMs warranty he will have to, for now, not push the tool beyond his comfort. Also that this tool is a "whole new thing". I am applauding LM for this.I dont foresee failures, materials that is. The drivers snapping, plier jaws breaking, etc etc. Its not out of the question but until we actually see we can only guess. I do hope this tool in those of you who have them continue to experience positive feelings from them. The Free series while spendy for some sure looks every bit a tool for things that pop up. TG24 you couldn't have said it better. Might not replace anything in LMs lineup but theres really no need to. We've got heavy duty tools and light duty tools. We have room for in between tools.
Sorry if I wasn't clear earlier.
-
@Aloha said:
Thank you TG24. I wasn't generalizing I was more directing those comments to Sam ;). If the tool was going to be more for his collection purposes only based on his experiences so far.I wholeheartedly agree this tool looks to be a fine tool. I like Sams follow up
. Since he is not able to take advantage of LMs warranty he will have to, for now, not push the tool beyond his comfort. Also that this tool is a "whole new thing". I am applauding LM for this.I dont foresee failures, materials that is. The drivers snapping, plier jaws breaking, etc etc. Its not out of the question but until we actually see we can only guess. I do hope this tool in those of you who have them continue to experience positive feelings from them. The Free series while spendy for some sure looks every bit a tool for things that pop up. TG24 you couldn't have said it better. Might not replace anything in LMs lineup but theres really no need to. We've got heavy duty tools and light duty tools. We have room for in between tools.
Sorry if I wasn't clear earlier.
I misunderstood mate

Now I get what you meant with "For the collection then.......... ", thanks for explaining
.
-
I give Leatherman credit for listening to their fans. When I have read the threads here over the years there has been a pattern of consistent wants:
Scissors-check
Replaceable wire cutters-check
Awl-check
OHO-check -
@gerleatherberman said:
Hard to get any pics without any shade today, but here are a few.Nice pics GLBM

-
Big ole' P sandwich.



-
And looks like the first few production batches may have been the only ones without a date stamp. The latest P4 I received has one on the handle that the clip or lanyard things go, on the back of the pliers rest.


And, lastly, I feel like the latest P4 example isn't fitted/finished as nicely as my first one. Polished parts are ever-so slightly less polished(see photos to see more pronounced grinds on the tool spines). Not enough to really really piss me off, but I feel like every example of the P2/P4 should be perfectly fitted/finished like the first ones. I felt like the first one was worth $140, but I feel like the second one I got is worth $110(yet is cost $140 as well).

Edit: Please note the top P2 and botton P4 are both covered in oil I put on every tool I own to stop spotting and hasn't dried yet. Makes them look funny.

-
Went from the Wave to the Charge+, to the P2.
I wanted the pocket clip and a lower profile.
I am now wondering if I should have gotten the P4.
D’oh!I love the P2. Am I going to regret not getting a bulkier tool for a few options I’ll never use?
Probably!How much heavier is the P4, how much thicker? Real world feel, is it noticeable?
Sent from my iPhone using Tapatalk
-
The P4 only gives you two more implements. A wood saw and a serrated blade. Both of which work VERY well. I went with the P4, because it is the same weight as the Charge TTi I usually carry and has a similar toolset. Not as good of a toolset in function, but similar.
I'll weight both in a bit and take the calipers to them and post again. :)Welcome to the forum, Wpgwave!

-
P2 - 219.7g(7.753oz) with pocket clip attached.
15.5mm(0.61") thick at the scales.
19.7mm(0.77") thick at the lock release.P4 - 247.1g(8.716oz) with lanyard attached.
17.2mm(0.68") thick at the scales.
20.9mm(0.82") thick at the lock release. -
maybe the uncoded ones will be collectors items in the future, being the first ones made

-
@Blackbeard said:
maybe the uncoded ones will be collectors items in the future, being the first ones made
I think you're right. I spent all evening changing the handles with the date stamp out between the dated and undated ones.

Note: Check the polarity of the magnets before putting the stuff back together. I had one all together and popped the pliers back in and the handles were repelling each other.

BTW: There is only one single magnet in each handle. It is the new locking system and springs that are cantankerous to reassemble if the owner doesn't take MTs apart very often.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login