Leatherman Free P2/P4 Club and Feedback Thread
-
Thank you TG24. I wasn't generalizing I was more directing those comments to Sam ;). If the tool was going to be more for his collection purposes only based on his experiences so far.
I wholeheartedly agree this tool looks to be a fine tool. I like Sams follow up
. Since he is not able to take advantage of LMs warranty he will have to, for now, not push the tool beyond his comfort. Also that this tool is a "whole new thing". I am applauding LM for this.I dont foresee failures, materials that is. The drivers snapping, plier jaws breaking, etc etc. Its not out of the question but until we actually see we can only guess. I do hope this tool in those of you who have them continue to experience positive feelings from them. The Free series while spendy for some sure looks every bit a tool for things that pop up. TG24 you couldn't have said it better. Might not replace anything in LMs lineup but theres really no need to. We've got heavy duty tools and light duty tools. We have room for in between tools.
Sorry if I wasn't clear earlier.
-
@Aloha said:
Thank you TG24. I wasn't generalizing I was more directing those comments to Sam ;). If the tool was going to be more for his collection purposes only based on his experiences so far.I wholeheartedly agree this tool looks to be a fine tool. I like Sams follow up
. Since he is not able to take advantage of LMs warranty he will have to, for now, not push the tool beyond his comfort. Also that this tool is a "whole new thing". I am applauding LM for this.I dont foresee failures, materials that is. The drivers snapping, plier jaws breaking, etc etc. Its not out of the question but until we actually see we can only guess. I do hope this tool in those of you who have them continue to experience positive feelings from them. The Free series while spendy for some sure looks every bit a tool for things that pop up. TG24 you couldn't have said it better. Might not replace anything in LMs lineup but theres really no need to. We've got heavy duty tools and light duty tools. We have room for in between tools.
Sorry if I wasn't clear earlier.
I misunderstood mate

Now I get what you meant with "For the collection then.......... ", thanks for explaining
.
-
I give Leatherman credit for listening to their fans. When I have read the threads here over the years there has been a pattern of consistent wants:
Scissors-check
Replaceable wire cutters-check
Awl-check
OHO-check -
@gerleatherberman said:
Hard to get any pics without any shade today, but here are a few.Nice pics GLBM

-
Big ole' P sandwich.



-
And looks like the first few production batches may have been the only ones without a date stamp. The latest P4 I received has one on the handle that the clip or lanyard things go, on the back of the pliers rest.


And, lastly, I feel like the latest P4 example isn't fitted/finished as nicely as my first one. Polished parts are ever-so slightly less polished(see photos to see more pronounced grinds on the tool spines). Not enough to really really piss me off, but I feel like every example of the P2/P4 should be perfectly fitted/finished like the first ones. I felt like the first one was worth $140, but I feel like the second one I got is worth $110(yet is cost $140 as well).

Edit: Please note the top P2 and botton P4 are both covered in oil I put on every tool I own to stop spotting and hasn't dried yet. Makes them look funny.

-
Went from the Wave to the Charge+, to the P2.
I wanted the pocket clip and a lower profile.
I am now wondering if I should have gotten the P4.
D’oh!I love the P2. Am I going to regret not getting a bulkier tool for a few options I’ll never use?
Probably!How much heavier is the P4, how much thicker? Real world feel, is it noticeable?
Sent from my iPhone using Tapatalk
-
The P4 only gives you two more implements. A wood saw and a serrated blade. Both of which work VERY well. I went with the P4, because it is the same weight as the Charge TTi I usually carry and has a similar toolset. Not as good of a toolset in function, but similar.
I'll weight both in a bit and take the calipers to them and post again. :)Welcome to the forum, Wpgwave!

-
P2 - 219.7g(7.753oz) with pocket clip attached.
15.5mm(0.61") thick at the scales.
19.7mm(0.77") thick at the lock release.P4 - 247.1g(8.716oz) with lanyard attached.
17.2mm(0.68") thick at the scales.
20.9mm(0.82") thick at the lock release. -
maybe the uncoded ones will be collectors items in the future, being the first ones made

-
@Blackbeard said:
maybe the uncoded ones will be collectors items in the future, being the first ones made
I think you're right. I spent all evening changing the handles with the date stamp out between the dated and undated ones.

Note: Check the polarity of the magnets before putting the stuff back together. I had one all together and popped the pliers back in and the handles were repelling each other.

BTW: There is only one single magnet in each handle. It is the new locking system and springs that are cantankerous to reassemble if the owner doesn't take MTs apart very often.
-
@gerleatherberman said:
I think you're right. I spent all evening changing the handles with the date stamp out between the dated and undated ones.
Note: Check the polarity of the magnets before putting the stuff back together. I had one all together and popped the pliers back in and the handles were repelling each other.

that sounds cool, on this end
I'm sure it sucked tho -
Hello there, i have ordered a P4 and can't wait to get it. Today or tommorow.
Anyway... I heard that LMN will/is shipping free (no money) pocket carrier for the users who have bought a P4, cuz this one has a lanyard.
Is yhere any truth behind, should i stress lmn support? -
@Blackbeard said:
that sounds cool, on this end
I'm sure it sucked tho

@Raoul Octav said:
Hello there, i have ordered a P4 and can't wait to get it. Today or tommorow.
Anyway... I heard that LMN will/is shipping free (no money) pocket carrier for the users who have bought a P4, cuz this one has a lanyard.
Is yhere any truth behind, should i stress lmn support?Congrats, Raoul!

It is a fun tool for sure.
I'd email them and see. I need to do the same. :ahhh
-
@Blackbeard said:
maybe the uncoded ones will be collectors items in the future, being the first ones made
Oh that's just great...
Now I need to get another one...

Just as I did with my first Wave + that came with different lettertype "Leatherman" and without the "+" on the handles.
I swear they are doing this on purpose
. -
Since the date coded ones are the latest ones, you're going to need to make sure you have an undated P2 and P4 before they're all gone to new owners.

-
@gerleatherberman said:
Since the date coded ones are the latest ones, you're going to need to make sure you have an undated P2 and P4 before they're all gone to new owners.
My P4 has no date codes, and I'm probably going to wait a while before I get a second one, first of all to make sure it's one with date codes and second because they are quite expensive over here...
And that's also the reason why I probably won't go for the P2 (probably being an important word in that sentence ::)).
-
@Top-Gear-24 said:
My P4 has no date codes, and I'm probably going to wait a while before I get a second one, first of all to make sure it's one with date codes and second because they are quite expensive over here...And that's also the reason why I probably won't go for the P2 (probably being an important word in that sentence ::)).
Yeah, I am feeling the money-hurt after buying three Ps. Yeah, they're cheaper here, but when I start to add them up.

And you're going to need to get a P4 very soon, or the one you probably won't get will have date codes.

-
I do not know how many of you are familiar with the Sonic Movie redesign story.
In short, the design of Sonic has been received with so much critic that the movie studio stated they will redesign Sonic to be more like the video game Sonic . Movie will be released this autumn.
My idea, not to start any beef with you or LMN, is me ... as a user,
to have a saying in the design of a multi tool
( i tried saying that to LMN with the mods thing, mods to do yourself at home via official kits (they did hat thing with the engraving, 1-2y after my inittial email(not that i was the rootcause))
I fell that this way we can get faster to the Supreme Multitool, yeah..i know i'm a dreamer,
yet just imagine something where you can customize, adjust to your specific needs, with no grinding, cannibalizing other multitools etc etc.
Anyway, what do you say, could we persuade LMN to issue a second series of LMN FREE P4 with the below:I have no problem with the lack of a bit holder, yet a ST300/Rebar Philips screw driver would solved this as there is the bit adapter for that specific tool.
Also, a carving on the end of the pliers head, to support the bits would have solved the issue too.
Surge Tshank is a must from my view. To be mounted on the side, where the saw rests. It gives you more freedom, the file(diamond coated) can be free and you can use it for sharpening your blade in a specific scenario, you can also use aftermarket metal saw, not just a wood saw, and it would solve that comedic small , fingernail -file -ruler that everyone says it’s useless.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login