Leatherman Free P2/P4 Club and Feedback Thread
-
The P4 only gives you two more implements. A wood saw and a serrated blade. Both of which work VERY well. I went with the P4, because it is the same weight as the Charge TTi I usually carry and has a similar toolset. Not as good of a toolset in function, but similar.
I'll weight both in a bit and take the calipers to them and post again. :)Welcome to the forum, Wpgwave!

-
P2 - 219.7g(7.753oz) with pocket clip attached.
15.5mm(0.61") thick at the scales.
19.7mm(0.77") thick at the lock release.P4 - 247.1g(8.716oz) with lanyard attached.
17.2mm(0.68") thick at the scales.
20.9mm(0.82") thick at the lock release. -
maybe the uncoded ones will be collectors items in the future, being the first ones made

-
@Blackbeard said:
maybe the uncoded ones will be collectors items in the future, being the first ones made
I think you're right. I spent all evening changing the handles with the date stamp out between the dated and undated ones.

Note: Check the polarity of the magnets before putting the stuff back together. I had one all together and popped the pliers back in and the handles were repelling each other.

BTW: There is only one single magnet in each handle. It is the new locking system and springs that are cantankerous to reassemble if the owner doesn't take MTs apart very often.
-
@gerleatherberman said:
I think you're right. I spent all evening changing the handles with the date stamp out between the dated and undated ones.
Note: Check the polarity of the magnets before putting the stuff back together. I had one all together and popped the pliers back in and the handles were repelling each other.

that sounds cool, on this end
I'm sure it sucked tho -
Hello there, i have ordered a P4 and can't wait to get it. Today or tommorow.
Anyway... I heard that LMN will/is shipping free (no money) pocket carrier for the users who have bought a P4, cuz this one has a lanyard.
Is yhere any truth behind, should i stress lmn support? -
@Blackbeard said:
that sounds cool, on this end
I'm sure it sucked tho

@Raoul Octav said:
Hello there, i have ordered a P4 and can't wait to get it. Today or tommorow.
Anyway... I heard that LMN will/is shipping free (no money) pocket carrier for the users who have bought a P4, cuz this one has a lanyard.
Is yhere any truth behind, should i stress lmn support?Congrats, Raoul!

It is a fun tool for sure.
I'd email them and see. I need to do the same. :ahhh
-
@Blackbeard said:
maybe the uncoded ones will be collectors items in the future, being the first ones made
Oh that's just great...
Now I need to get another one...

Just as I did with my first Wave + that came with different lettertype "Leatherman" and without the "+" on the handles.
I swear they are doing this on purpose
. -
Since the date coded ones are the latest ones, you're going to need to make sure you have an undated P2 and P4 before they're all gone to new owners.

-
@gerleatherberman said:
Since the date coded ones are the latest ones, you're going to need to make sure you have an undated P2 and P4 before they're all gone to new owners.
My P4 has no date codes, and I'm probably going to wait a while before I get a second one, first of all to make sure it's one with date codes and second because they are quite expensive over here...
And that's also the reason why I probably won't go for the P2 (probably being an important word in that sentence ::)).
-
@Top-Gear-24 said:
My P4 has no date codes, and I'm probably going to wait a while before I get a second one, first of all to make sure it's one with date codes and second because they are quite expensive over here...And that's also the reason why I probably won't go for the P2 (probably being an important word in that sentence ::)).
Yeah, I am feeling the money-hurt after buying three Ps. Yeah, they're cheaper here, but when I start to add them up.

And you're going to need to get a P4 very soon, or the one you probably won't get will have date codes.

-
I do not know how many of you are familiar with the Sonic Movie redesign story.
In short, the design of Sonic has been received with so much critic that the movie studio stated they will redesign Sonic to be more like the video game Sonic . Movie will be released this autumn.
My idea, not to start any beef with you or LMN, is me ... as a user,
to have a saying in the design of a multi tool
( i tried saying that to LMN with the mods thing, mods to do yourself at home via official kits (they did hat thing with the engraving, 1-2y after my inittial email(not that i was the rootcause))
I fell that this way we can get faster to the Supreme Multitool, yeah..i know i'm a dreamer,
yet just imagine something where you can customize, adjust to your specific needs, with no grinding, cannibalizing other multitools etc etc.
Anyway, what do you say, could we persuade LMN to issue a second series of LMN FREE P4 with the below:I have no problem with the lack of a bit holder, yet a ST300/Rebar Philips screw driver would solved this as there is the bit adapter for that specific tool.
Also, a carving on the end of the pliers head, to support the bits would have solved the issue too.
Surge Tshank is a must from my view. To be mounted on the side, where the saw rests. It gives you more freedom, the file(diamond coated) can be free and you can use it for sharpening your blade in a specific scenario, you can also use aftermarket metal saw, not just a wood saw, and it would solve that comedic small , fingernail -file -ruler that everyone says it’s useless. -
Nice recommendations, Raoul! But, a minor correction on a statement you made about the file.
The P file is double sided, one side cross cut mild and the other single cut aggressive. Much more useful than the file/ruler thing on the Wingman/Sidekick/Rev.
The comedic "ruler"(which we know is there to pad the tool count), on the P2/P4, is on the medium flat driver implement that includes a small wire stripper at the base.
Edit: Photos of the mentioned implements.


-
Aloha categorised tool well, fun to play with tool [emoji23] Seems toolset vice example rebar is not so strong so update need is not from that perspective. I really wait K and T to come out. Those are in size I could EDC fun to play with tool. And sure do unexpected tasks so without underrating tool properties.
Sent from my VIE-L09 using Tapatalk
-
@Raoul Octav said:
Hello there, i have ordered a P4 and can't wait to get it. Today or tommorow.
Anyway... I heard that LMN will/is shipping free (no money) pocket carrier for the users who have bought a P4, cuz this one has a lanyard.
Is yhere any truth behind, should i stress lmn support?I emailed leatherman about this asking if it was true, and they must have looked up my email to see if I was a customer. They ended up sending the pocket clip kit out right away and I have received it already...no charge. I posted some pics of it a few posts back. Pretty cool as it isn't even available on their website yet last time I checked. I didn't get a chance to try it out though as I had to send my P4 along with a charge TTI in for warranty yesterday.
-
Wow nwoody that is amazing service,
Leatherman gets too much crap from people, I am consistently impressed with them.
-

I emailed LM about a pocket clip and got this back:
I will get that out in the mail to you.
Janel Malcomson
Leatherman Tool Group
Consumer Support SpeSmurfpillst
5226 NE 152nd Place
Portland, OR 97230
800-847-8665 X484
503-408-5484-direct line
-
@gerleatherberman said:
I emailed LM about a pocket clip and got this back:Basically the same response I got. Never got a tracking number but it did show up a few days later. The customer service does seem amazing. I've been pleasantly pleased the couple times I've previously used the warranty service, granted I did send in retired tools, so got brand new tools back instead of repairing mine. Sent in an old wave and got a brand new wave + back and also sent an old broken PST and got a brand new rebar back. My P4 and charge tti are supposed to make it to them tomorrow, hopefully it doesn't take too long for them to repair and send it back! I already miss fidgeting with the p4.
-
Look what
SantaUPS brought...First brief impression is very nice and flickable, nicely loose pliers and good external tool extraction. Inner tools somewhat stiffer. Reminds a bit of an OHO Spirit.
No date stamps in the handles, dispatched by BladeHQ on the 3rd of May. Maybe they're still working on their first-prod batch.
Dilemma, nay, quandary... user or collection? I don't actually collect as such...

-
Nice one D_T

I would use it :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login