Leatherman Free P2/P4 Club and Feedback Thread
-
That would be great GLBM if you could show us
how to take the magnets out and put them back
-
Nice one TG

-
I have been told by Support that only Canada and USA will receive the pocket clip. No pocket clip for the Land of Dracula :(
Great achievment GBLM, i envy you, honestly i wish i'll be able to build a multitool for my kids based on their requierments (when they are bigger).
Yet, everyone who made a sandwich and used a screwdriver will be able to reassemble it.
While it was dissasembled and i analyzed the behaviour, an extra washer for the main 4 tools will make a big difference in their ease of deployment, and i have tightened the tool much more than it was delivered by LMN, well... I guess it was about an extra quarter. -
@Top-Gear-24 said:
Got an e-mail from Leatherman U.S.A. today ...Spoiler:
They are sending me a pocketclip for my Free P4 as a courtesy, how cool is that
.THANK YOU LEATHERMAN U.S.A.

P.S.: Still no answer from Leatherman Belgium to my question from a couple of weeks ago, "if they could tell me when the Free P4 would be available here, and if they knew how much it would cost ... " ::)
Can I ask did you buy yours from Leatherman direct or a retailer?
-
@Wspeed said:
That would be great GLBM if you could show us
how to take the magnets out and put them back
Yeah man. I'll take some pics or video this evening if I remember.

@Raoul Octav said:
I have been told by Support that only Canada and USA will receive the pocket clip. No pocket clip for the Land of Dracula :(
Great achievment GBLM, i envy you, honestly i wish i'll be able to build a multitool for my kids based on their requierments (when they are bigger).
Yet, everyone who made a sandwich and used a screwdriver will be able to reassemble it.
While it was dissasembled and i analyzed the behaviour, an extra washer for the main 4 tools will make a big difference in their ease of deployment, and i have tightened the tool much more than it was delivered by LMN, well... I guess it was about an extra quarter.Very cool.

-
@shadow78 said:
Can I ask did you buy yours from Leatherman direct or a retailer?I ordered mine from the webshop of a local outdoorstore (A.S. Adventure) since they are an official Leatherman dealer in Belgium, which is always easier in case of a warranty issue. I took a printscreen from my order history and send it along with my e-mail to Leatherman U.S.A. to "prove" that I bought one.
I asked them where/when I could find a pocketclip for the Free P4 in Belgium, and if they could tell me the retail price on them. And they answered that they were going to send me one, just like that :o.
-
For LM customer support. -
@gerleatherberman said:
For LM customer support.Yep. I've just sent a mail too; after all I bought my P4 in the US, albeit at BladeHQ. Let's see if they send me one too (to my home address as I'll be flying back day after tomorrow)...
-

I am hoping they will. Bet they don't sell premium tools without the clip included again.
The $120 Charge comes with an optional clip and lanyard. The Free Ps should have included the same options, now that I think about it.

-
Hmm, i'm going to stress Leatherman again, about that pocket clip.
This is my experience regardin reassembly. -
@Raoul Octav said:
Hmm, i'm going to stress Leatherman again, about that pocket clip.
This is my experience regardin reassembly.Good video, Raoul! :like:
That is definitely going to be helpful to people. I like your pliers-removed method of stacking. :salute:
-
My quick and dirty magnet replacement video. It's awful, but I don't have the life force left this evening to remake it. :rofl:
If anyone wants, I'll remake the video using the correct tools(like angle pick, soft tip pliers, etc) at some point. I just used what I had at my desk for the video.
Note: The springs are difficult to damage, but be careful to not put too much force in pulling them upwards to remove the magnet. You only need them to be raised just a bit to slide each side out one at a time. And always make sure the magnet polarity is correct. Also make sure the scissors spring is seated with the two "bumps" placed into the main scissors implement.
-
What's the centre-to-centre distance between the plier pivots? I am interested to see how it compares with other tools.
It looks to be about 18mm on my Surge. -
@gerleatherberman good to know, seems a little to much of a hassle tough.
I wonder why LMN did not put some extra washers.
On one side they did, altough one is missing, and on the other side they didn't put any.
Curtesy of SteveC, i altered the pic to stress the missing washers which would make the opening much smoother.
-
Who has an inside man to help me get a Pocket Clip, courtesy of LMN, as i have a P4 ?
Because, this is the response i got :
Good Morning,
I am happy you were able to get that P4 so quickly. When it comes to the pocket clip, as they are being sold on Leatherman.com now with the pocket clip, customers in the US and Canada, only, who have already purchased them are receiving them as a one time courtesy when they contact us for one.
Kind Regards,

-
@Syncop8r said:
What's the centre-to-centre distance between the plier pivots? I am interested to see how it compares with other tools.
It looks to be about 18mm on my Surge.Will post that in a bit. :)
@Raoul Octav said:
@gerleatherberman good to know, seems a little to much of a hassle tough.
I wonder why LMN did not put some extra washers.
On one side they did, altough one is missing, and on the other side they didn't put any.
Curtesy of SteveC, i altered the pic to stress the missing washers which would make the opening much smoother.Thanks, man!

It is a small hassle, but when not making a video, the magnet swap takes about 2 minutes, where a full break down and reassembly takes 5-8 minutes. The method I posted also reduces the possibility of any parts going rogue across the room(like the little washers and screws. :ahhh -
The more I see the blade the more I am digging the profile of it

-
@gerleatherberman said:
I pushed extremely hard on all of the tabs in my Ps and none of them broke and barely flexed. I think this is not going to be a common problem. The 420HC they used for the handles on the Ps is quite strong, even at the 'weak' areas.
Just checked on mine, next to no give on the tabs (although undated). May have been just a production fluke on that P2...
-
@Dutch_Tooler said:
Just checked on mine, next to no give on the tabs (although undated). May have been just a production fluke on that P2...Very good.

The more I mess with the P4, the more I like it. And it isn't, because it is that great of a tool. I just really like the completely different execution of a useful MT.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
