ZapWizard Shapeways Wave Holster
-
Amazing how 3D printing tech has come. Used to be, the plastic was kinda crappy and it couldn't be used for anything that was made to be used hard.Just assorted novelties and prototypes. I've noticed Shapeways has been introducing a lot of technical/industrial plastics that are made to really take a beating and a half.
Now ,I wonder how long until they come out with a printer that can print using tool steels and harden/heat treat the finished product? From what I've seen, the steels (or should I simply say "metals") used for 3D printing of tools are a bit weak for withstanding any abuse.
-
Somewhat inconvenient but not a deal breaker is what the last sentence should have been concerning the bit retainer on the back of the holster.
Sent from my SM-N960U using Tapatalk
-
Edited.

-
Very cool sheath and I love the built in bit holder
I wonder how hard it would be to incorporate the bit holder part to the sides instead of the back though
Be neat to see bits on both sides and maybe a spot for a long flat bit as well
Thanks for sharing, David

-
Cool for sure but I am such a sucker for leather. I like the way the bits are stowed
. Nice work and very nice reviews as always. -
David Bowen, thanks for the review. Full disclosure: This is the only holster I have ever sent out for review. I made it for myself, but since have expanded the design to include the Charge TTI, and Surge. I also am working on a Free P4 holster, and soon a Rebar holster. The Free P4 for myself, and the Rebar after a customer request.
Since they are 3D printed on-demand I can alter the design at needed. I have made lots of alterations and alternative versions based on customer requests.
Each holster is currently available with a BDU compatible belt loop, double thick loop, and Tek-Lok holder. Each also can have the Leatherman Bit Extender holder added to the side.
I am just one person, and sell these though my Shapeways shop (link in my signature). Shapeways is a 3D printing house that uses professional quality 3D printers to make the parts, as well as handle the shipping and purchasing.@cody6268 said:
Amazing how 3D printing tech has come. Used to be, the plastic was kinda crappy and it couldn't be used for anything that was made to be used hard.Just assorted novelties and prototypes. I've noticed Shapeways has been introducing a lot of technical/industrial plastics that are made to really take a beating and a half.Now ,I wonder how long until they come out with a printer that can print using tool steels and harden/heat treat the finished product? From what I've seen, the steels (or should I simply say "metals") used for 3D printing of tools are a bit weak for withstanding any abuse.
Selective Laser Sintering (SLS) Nylon is awesome. Compared to "at-home" FDM 3D printing, the actual parts are solid, nearly as good as injection molded plastic. The nylon material is durable and strong. As with all nylons it can absorb water, so I wouldn't leave the tool in the holster after it has been wet. (Any tool should be cleaned and dried if exposed to direct moisture anyhow).
I have made a few parts with 3D printed steel, but nothing "functional" yet. I will be exploring that soon. The sintered steel parts are not as strong as solid steel of course, but strong enough that bottle openers and such are a popular item on Shapeways.
@Aloha said:
Cool for sure but I am such a sucker for leather. I like the way the bits are stowed
. Nice work and very nice reviews as always.I am also a sucker for Leather, but when it comes to a Multitool I want to be able to access it in a second, and put it away just as fast. I also didn't like how high the stock Leatherman Holsters sit on your hip.
Here is a video showing the holster:
https://www.youtube.com/watch?v=BH5edOG1p2k -
If the tool snags on something at the top will it be yanked out?
-
@pomsbz said:
If the tool snags on something at the top will it be yanked out?If something were caught it could pull it out the top, but it would have to be a good solid snag. The tool is held in place using the spring clips. It is held with enough force that the tool won't come out if held upside down, or even shaken moderately. (Less shaking is required on the heavier surge)
There are no protrusions on the wave or charge that should get snagged. The surge might get caught on the clip that holds the blades in place. Because the top edge is exposed, you can still use the holster, and keep a lanyard attached to the Wave's built-in hook.
When it first arrives the 3D print has a texture similar to that of fine sandstone, (~800 grit sand paper). This can catch on knit or loose thread shirts ad David mentioned, but not anything as strong as velcro. The surface will naturally smooth out over time. Mine won't even grip on a microfiber cloth. You can also lightly sand the surface using 1000 grit sand paper. However, don't sand too deep and the black treatment is on the surface. It can be touched up using any black ink.
Here is a photo of mine, taken as I typed this. It is now a bit over a year old. I wear and use it daily. The tool has been cycled thousands of times. You can see a few spots where the black has rubbed off, and some spots where the screws have rubbed against the surface.

-
Will it fit other models of Charge? I have a Charge AL for example.
-
The scales on the Charge AL are a bit thinner than the TI, however the holster uses the sides and blades to hold the tool in. So a Charge AL should fit.
However there may be a small gap between the back of the tool, and the inside surface of the holster. This may cause some rattling, a thin adhesive foam or plastic shim would solve that.
I don't sell enough to these to go out and buy every Letterman tool combination. (Granted I just bought a SuperTool 300 and Rebar for future designs -
These looks great! Any chance making some sheath for Victorinox Spirit?
:D -
@ZapWizard said:
All my holsters so far rely on the springs built into the Leatherman tools. The springs on the Spriti move up/down and wouldn't work well as a lock.That's true, relying on the lock is a pretty sure fire way to 'click' the tool in. Just wondering whether maybe the sheath would be elastic enough to have two bumps to clamp onto the sides of the tool
...that'd be sweet. :D -
The nylon material is flexible, and so it probably would be possible to design something that has bumps on the sides to grip the tool. However,it would require lots of tweaking and prototyping to get just right, and can't be easily simulated using FDM prototypes.
-
Thanks for the reply, if that's at all possible, that probably will be first quick access Spirit sheath ever. :D
-
I absolutely love this holster except for one small detail. Do you have it available where it has a belt clip instead of a belt loop? I hate having to take my belt loose to take the holster off my belt or to access the bits. Great idea.
Steve
-
The P4 will be available with a belt clip. I haven't yet added that to the other series. I still don't trust a open clip compared to a loop, no matter how flexible the plastic, clips wear out.
I access the bits by just tilting it out and pushing them sideways, but that only works for the bit sizes I already know. -
@ZapWizard said:
The P4 will be available with a belt clip. I haven't yet added that to the other series. I still don't trust a open clip compared to a loop, no matter how flexible the plastic, clips wear out.
I access the bits by just tilting it out and pushing them sideways, but that only works for the bit sizes I already know.I would be happy to purchase one and be a tester for the charge plus titanium if you are interested.
Sent from my SM-N950U using Tapatalk
-
The Leatherman Free P4 holster is now available:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
@4x4ff said:
I would be happy to purchase one and be a tester for the charge plus titanium if you are interested.I have added putting a flexible clip option to the list of things to do. My CAD design is completely modular, so it would become available for the Wave and Surge also, but probably beefed up on the Surge.
Here is an image of the clip on the P4:

-


Today I designed the open-clip on versions of the Wave and Charge holsters.
Each one is available in three variants.
-
A no-bit holder, smooth back
-
One with four bit holders
-
Four bit holder, and a bit-extender holder
I also designed the requested thumb-tabs that will fit the Wave and Charge. I ordered my own set to test, but they should work the same as my Free P4 tabs which have worked well so far.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login