Leatherman Free P2/P4 Club and Feedback Thread
-
@gerleatherberman good to know, seems a little to much of a hassle tough.
I wonder why LMN did not put some extra washers.
On one side they did, altough one is missing, and on the other side they didn't put any.
Curtesy of SteveC, i altered the pic to stress the missing washers which would make the opening much smoother.
-
Who has an inside man to help me get a Pocket Clip, courtesy of LMN, as i have a P4 ?
Because, this is the response i got :
Good Morning,
I am happy you were able to get that P4 so quickly. When it comes to the pocket clip, as they are being sold on Leatherman.com now with the pocket clip, customers in the US and Canada, only, who have already purchased them are receiving them as a one time courtesy when they contact us for one.
Kind Regards,

-
@Syncop8r said:
What's the centre-to-centre distance between the plier pivots? I am interested to see how it compares with other tools.
It looks to be about 18mm on my Surge.Will post that in a bit. :)
@Raoul Octav said:
@gerleatherberman good to know, seems a little to much of a hassle tough.
I wonder why LMN did not put some extra washers.
On one side they did, altough one is missing, and on the other side they didn't put any.
Curtesy of SteveC, i altered the pic to stress the missing washers which would make the opening much smoother.Thanks, man!

It is a small hassle, but when not making a video, the magnet swap takes about 2 minutes, where a full break down and reassembly takes 5-8 minutes. The method I posted also reduces the possibility of any parts going rogue across the room(like the little washers and screws. :ahhh -
The more I see the blade the more I am digging the profile of it

-
@gerleatherberman said:
I pushed extremely hard on all of the tabs in my Ps and none of them broke and barely flexed. I think this is not going to be a common problem. The 420HC they used for the handles on the Ps is quite strong, even at the 'weak' areas.
Just checked on mine, next to no give on the tabs (although undated). May have been just a production fluke on that P2...
-
@Dutch_Tooler said:
Just checked on mine, next to no give on the tabs (although undated). May have been just a production fluke on that P2...Very good.

The more I mess with the P4, the more I like it. And it isn't, because it is that great of a tool. I just really like the completely different execution of a useful MT.

-
Hey good news TG!
LM Belgium never replied to my exact same question about the LE PST...
Nothing at all...I think the LM branch here just sips coffee all day on the profits of the hard working folks in the USA.
-
@Mechanickal said:
Hey good news TG!LM Belgium never replied to my exact same question about the LE PST...
Nothing at all...I think the LM branch here just sips coffee all day on the profits of the hard working folks in the USA.
I think we should take over ...

-
@Top-Gear-24 said:
I think we should take over ...
I think we'd rock at our job 8)
Their job... -
After a couple of days of light use:
Pros:
- well constructed
- main blade has a surprisingly solid, beefy feel
- pocket clip and nice sheath
- magnet and free-swinging handles
- plain edge blade, serrated blade, saw and scissors seem of good quality
- replaceable cutters, nice plier head
- long shank on phillips
- looks pretty nice
- smooth on the hand when using the pliers
- outside-opening tools. Finally.
Cons:
- price; repeat this 32 times
- the deployment of the exterior tools seems very gimmicky and unnatural to me. Whether pushing the thumb forward, sideways or toward the palm, it is difficult to deploy the tools and it hurts the thumb. Its impossible to deploy the phillips driver (and whatever that thing is next to it) except by pushing the thumb forward, and even then it is pretty difficult. Its not a deal-breaker, but its close.
- what is that thing next to the phillips? Flat driver? Pry bar? Package opener? Where the heck is the "package opener"?
- no real 3D phillips
- the ruler has to be a prank; you can hear Timmy giggling if you try hard
- the file is teeny weeny, but at least its sharp and well-made
I would like a spring-loaded plier head, but this probably would reduce the strength of the head.
Until I received this, I thought that each tool - like the 2D phillips - was secured with a magnet. I was wrong, but that's on me. The two halves of the tool are secured with magnets.
I knew what I was getting into when I bought this, so no complaints. The price and the tool deployment turn me off, but I had to have one just to satisfy my MT urge. This MT seems to do every okay, and I'm going to carry it for the foreseeable future just to get a better feel for it. I can work my way past the gimmicky tool deployment. But I would not recommend this to anyone because of the exorbitant price and unnatural tool deployment, instead advocating the Wave, Rebar, Spirit, etc. at 50 - 70% of the cost.


-
Thanks for measuring that GLBM.

I'm surprised though, it always looked to me as if it is much further on the Free than on other models. Perhaps it is just that the handles are thinner.
-
@powernoodle said:
After a couple of days of light use:Pros:
- well constructed
- main blade has a surprisingly solid, beefy feel
- pocket clip and nice sheath
- magnet and free-swinging handles
- plain edge blade, serrated blade, saw and scissors seem of good quality
- replaceable cutters, nice plier head
- long shank on phillips
- looks pretty nice
- smooth on the hand when using the pliers
- outside-opening tools. Finally.
Cons:
- price; repeat this 32 times
- the deployment of the exterior tools seems very gimmicky and unnatural to me. Whether pushing the thumb forward, sideways or toward the palm, it is difficult to deploy the tools and it hurts the thumb. Its impossible to deploy the phillips driver (and whatever that thing is next to it) except by pushing the thumb forward, and even then it is pretty difficult. Its not a deal-breaker, but its close.
- what is that thing next to the phillips? Flat driver? Pry bar? Package opener? Where the heck is the "package opener"?
- no real 3D phillips
- the ruler has to be a prank; you can hear Timmy giggling if you try hard
- the file is teeny weeny, but at least its sharp and well-made
I would like a spring-loaded plier head, but this probably would reduce the strength of the head.
Until I received this, I thought that each tool - like the 2D phillips - was secured with a magnet. I was wrong, but that's on me. The two halves of the tool are secured with magnets.
I knew what I was getting into when I bought this, so no complaints. The price and the tool deployment turn me off, but I had to have one just to satisfy my MT urge. This MT seems to do every okay, and I'm going to carry it for the foreseeable future just to get a better feel for it. I can work my way past the gimmicky tool deployment. But I would not recommend this to anyone because of the exorbitant price and unnatural tool deployment, instead advocating the Wave, Rebar, Spirit, etc. at 50 - 70% of the cost.


Great write up, Powernoodle! Thank you for taking the time to do that.

Will be looking forward to reading how the P4 handles your day-to-day MT needs.

-
@Syncop8r said:
Thanks for measuring that GLBM.
I'm surprised though, it always looked to me as if it is much further on the Free than on other models. Perhaps it is just that the handles are thinner.
You're quite welcome, Syncop8r!

I was a bit surprised as well. In fact, I set the calipers back to zero and took the measurement again to double check. It seems your suggestion of the handle geometry plays a role in the visuals.
-
@Striker said:
Hi everyone
Just received a leatherman free p2 from leatherman australia for $290 aud or $202 usd, thats what they cost here.
First impressions are good. Nice solid lockup on all tools. Its a nice size thickness wise. It's kind of a skeletool with scissors, which is exactly what i was hoping for.
Here is a few thickness comparisons between some modern leatherman tools i have on hand.
First the new shiny itself

This is a skeletool


This one is a rebar

This one is a wave

This is a OHT


Thanks :)
Thanks for this! Have always found thickness to be the most important dimension when it comes to comfortable pocket carry and every millimeter counts. Ironically, it also seems to be the least reported on dimension.
-
Well, me again... With some history this time.
My P4, when it arrived, at inspection i found that i could squeze the scales and a tiny space could be seen on between the scales and pivots.
I was not happy with the deployment of the main blade and the saw. And... The scissor was really close to the pliers and depending on the opening it touched the pliers.
I took it apart and observed that on the 4 implements side LMN put washers at the springs, except on the saw side.
I put the "missing" washer and on that side everything was snug, tight and easy to open.
On the main blade side there are no washers around the springs, so i put 2, and now i have changed the 2 with 4.
Guess who doesn't have fingerprints on the right hand...
Now... Deployment of tools is much better than arrived, with the tool itself beeing more... Lets say tight.
Yet... Somehow i have accentuated the scissor problem, it touches the pliers. Any ideea is welcome



-
More pics.




-
...



-
That little double bend in the sheet metal looks very similar to the Swisstool/Swisstool Spirit,
but on the Swisstool/Spirit it's a part of locking mechanism. -
Me again,
Something isn't right.
I have taken my tool apart a dozen time.
To have the scissor not rub against the pliers i had to abort the extra washer thingy.
Also, i observed that the pivots have to be inserted in the top scale, Not sit on it (you get it),
this to remove side play between the scales, and also side play in the implements,
yet side play will not be eradicated, and..in my case at least
this side play makes the saw and main blade real hard to open with one hand, saw can even touch the pliers, and in some cases the scissor too.
On the saw side there are washers, and a supplementary washer on the saw will help the ease of opening, Yet the washer needs to be large surface or at least the size of the oem washers( this i observed, to reduce flex/side play of the tools).
On the other hand
I used 2 types of lube, one motorcycle chain lube, the second some silicone based.
2-3 deployments of tools are smooth as hell than it starts to grind-rub, interestingly i fount it to be on the lock tab, with the end of the tools .
No problem with lube on the plier side, yet on the tools it starts to make a grind harshh sound, which is interesting as i can not explain it.
I have also observed that the main 4 tools , without lube, do not make this sound and are somehow easier to open than with lube/grease etc.
If the pivots are torqued tighter, the side play is reduced drastically, yet tools are a pain to open.
If they Torque is too less, there is sideplay and it's going to be hard to open saw and main blade(in my case, this is how the P4 came out of the factory )
An in between okeish case...i have not found yet,
I feel it is a design problem, as the handles are made of 2 parts, not one as Wave/rebar etc aaand the presence of the silicone based elastomer spring bushings whatsoever.
I believe someone has already pointed that out
Right now , it is a useless tool for me, as i can't get it to open and close the way i desire (saw, main blade and scissor, the rest are ok)
And the way i desire, is similar to Wave/Surge, on the main tools.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
