What did you use your Sak on today?
-
Thanks VICMAN

-

Guess what happened next!

-
Nice

-
The Pioneer is the perfect tool for centering cantilever mountain bike brakes.


-
@One more SAK said:
Don't you love nail guns?
I work in a Emergency Department at a suburban Melbourne hospital and occasionally we see the odd worker from a local construction site who has presented to us with a nail embedded in a part of their body that they were not intentionally aiming their nail gun at.
In this case a nurse asked me for my Victorinox Spirit XC that she remembered I had used to loosen a I.V line connection a few days ago and having nothing really suitable at hand for this procedure, I guess she must have thought the Spirits needle nose pliers would be perfect for this particular situation.
So the doctor extracted that pesky nail with my Spirit and after a Tetanus shot and script for some antibiotics our patient was sent home feeling much better.
P.S The patient was kind enough to let me take photo of the procedure also!Great use! And that's why nail guns freak me out, even though I use them all the time. We've been using finish nailers modelling house, and I've handled that thing with more caution than a loaded firearm.
On another note, I'm surprised they don't make a big fuss over MTs at the hospital you work at. The two main hospitals here have signs everywhere against carrying a pocketknife, even at the outpatient/doctor's offices run by them. One clinic (which my grandmother's doctor is in) is extra sneaky in that they put the sign "NO WEAPONS OF ANY KIND" inside the main entrance. I've got to the point that if I'm belt carrying, and waiting on my folks at that doctor, and i have to use the restroom, I just go to the fast food restaurant a mile down the road. At least my doctor, who runs his own office, really doesn't care; whether it be some guy concealed carrying; or me unloading my EDC when I get weighed.
-
Bathroom cabinet door hinge closing spring broke and the middle door did not close flush. So instead of buying a new cabinet (like my wife suggested) I bought this magnetic catch and put it on.

I had intended to use the Pioneer X exclusively, but I needed the extra reach of the LM Style long driver/file.

Here's the magnetic part installed. That SAK awl is great for making starting holes for screws.

And here is the opposite part. I lined it up by placing it on the magnets, painting it with a Sharpie, and closing the door --- this left a mark on the door for me so I knew where to use the SAK awl to drill my starting holes.
I still have one magnetic catch left, so if anyone wants a cabinet door fixed, PM me ;)
And, considering what I saved by not having to buy a new cabinet, I wonder if I can convince my wife that the money should go toward a new MT? ::)
-
Great work BP

Worth trying for a new MT good luck
-
Good usage BP.
anyone who does not know what an awl is good for does not do DIY with a SAK. 
-
I used my Outrider's cap lifter to pry the old 120V power outlet cover off the center console of the Ford Escape, and replace it with a new one; which snapped right on. Why should I have to go to the dealer for such a trivial task? The only thing I did was cause a few small tool marks on the plastic of the console; but the new cover hid most of those.
-
Good work cody

-
@cody6268 said:
I used my Outrider's cap lifter to pry the old 120V power outlet cover off the center console of the Ford Escape, and replace it with a new one; which snapped right on. Why should I have to go to the dealer for such a trivial task? The only thing I did was cause a few small tool marks on the plastic of the console; but the new cover hid most of those.Good usage.

...did not invalidate your warranty?

-
@Max Stone said:
Good usage.
...did not invalidate your warranty?

Being as it was just a small trim piece, I would assume it would not. And I don't think anyone will notice what I did. There was nothing electrical even connected to it--basically it was the automotive equivalent of a switch plate cover. But I did delay putting it in for 3 months, in part because of that. As, I figured if they messed up, it would be on them to fix their mistake. If I goofed up, it was all on me. But I was waiting on my folks to get their hair cut, and had absolutely nothing better to do, so I just put the part on while I was waiting. And the Ford dealer the car came from is a half-hour away, wasted trip for just a small trim piece that isn't really a problem other than looking bad broken.
-
As of this morning, I've already used my SwissChamp for the following:
Worked on some wall trim that wasn't quite cut to fit near a drawer. It had to be cut out to allow the kitchen cabinet drawer drawer to clear it, but not enough. I've been cutting a lot of it away, but used the chisel this time. I was surprised at how well it worked, especially on a 20 year old secondhand SwissChamp.
Used the saw to cut some notches into the deflector of the riding lawnmower deck. My grandfather likes to keep it up; and uses two rubber tie-downs to do so, but it slips off. I'd put two in the left side last season, but needed to put some on the right today.
Cut weed eater string with the scissors.
Sharpened the ends of the line with the pen blade. The head I put on my FS38 is a quick-load one, and according to the service rep, sharpening the ends makes them slot inside to lock into place better before spooling it inside the weed eater. -
Great uses cody

-
@cody6268 said:
As of this morning, I've already used my SwissChamp for the following:Worked on some wall trim that wasn't quite cut to fit near a drawer. It had to be cut out to allow the kitchen cabinet drawer drawer to clear it, but not enough. I've been cutting a lot of it away, but used the chisel this time. I was surprised at how well it worked, especially on a 20 year old secondhand SwissChamp.
Used the saw to cut some notches into the deflector of the riding lawnmower deck. My grandfather likes to keep it up; and uses two rubber tie-downs to do so, but it slips off. I'd put two in the left side last season, but needed to put some on the right today.
Cut weed eater string with the scissors.
Sharpened the ends of the line with the pen blade. The head I put on my FS38 is a quick-load one, and according to the service rep, sharpening the ends makes them slot inside to lock into place better before spooling it inside the weed eater.That SwissChamp is getting a workout today!

-
I put together an Ikea cabinet with my Pioneer X. And our swiss, erm army dog(?) also tried to help.

-
Great use Petteri and gorgeous looking dog

-
Used the scissors on the PioneerX to open a package



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login