Leap Owner's Club
-
@comis said:
Yes, I spoke from experience, I'd disengage the blade twice, once with and once without the tool. Oh, btw, you also have to depress the liner lock to get the blade out(which you don't have to depress the liner lock when you are getting it in)D'oh! >:(
Of course. Yeah it slides right out when you press on the locking tab.
Feel pretty silly now.

Too bad the saw isn't also remove able. This would be such a great platform for swapping tools in and out. File, belt cutter, etc etc. Would be amazing for flying.
-
Of course. Yeah it slides right out when you press on the locking tab.
Feel pretty silly now.

Too bad the saw isn't also remove able. This would be such a great platform for swapping tools in and out. File, belt cutter, etc etc. Would be amazing for flying.
Funny you mention that...I actually think that it might be possible to do this based on the way the pivots are made. From what I can tell the cuts into the pivots extend all the way through the tool. which means it might be possible to use the blade as a template to make the saw removable. This is definitely something I am considering after I first modify a few other tools to slot into the blade slot. I really want everyone to see the potential of this platform. I used it all day today and it was incredible at wood working. I found it more comfortable than even my Charge/Blast Hybrid. I have more pictures and other info to update a little later on.
Also you only need one security Torx to adjust the tool. The screw is located on the Saw or Scissor side of the tool.
Cheers,
H.G. -
@Happy Gilmore said:
Funny you mention that...I actually think that it might be possible to do this based on the way the pivots are made. From what I can tell the cuts into the pivots extend all the way through the tool. which means it might be possible to use the blade as a template to make the saw removable. This is definitely something I am considering after I first modify a few other tools to slot into the blade slot. I really want everyone to see the potential of this platform. I used it all day today and it was incredible at wood working. I found it more comfortable than even my Charge/Blast Hybrid. I have more pictures and other info to update a little later on.Also you only need one security Torx to adjust the tool. The screw is located on the Saw or Scissor side of the tool.
Cheers,
H.G.Indeed, the contoured handle is definitely quite comfortable to hold onto, and personally, I really love the weight saving this tool offers. It only weighs around 131g(4.6oz) and it disappear like a 4-5 layers SAK in pocket.
-
@comis said:
Indeed, the contoured handle is definitely quite comfortable to hold onto, and personally, I really love the weight saving this tool offers. It only weighs around 131g(4.6oz) and it disappear like a 4-5 layers SAK in pocket.Everything about the tool is surprising. Also, the scissors still have the issue of having material slide between the blades. So far only SAK, Surge, and Original wave scissors really meet my expectations. However, this one is above average. I was also able to use the scissor as an awl in softer wood. Still quite happy with it so far. And it's $40! That's crazyness
-
My scissors have been remarkably good. No biting on material so far. Not even on the gaffer tape.
-
@comis said:
I just tried Leap with cling wrap, it didn't give very clean towards the pivot each time, but if I were only using the front half of the scissors to cut, it did alright.Same experience, I want to clarify that it's WAY better than the wave + /charge scissors on cuts. However, SAK is still king
-
@powernoodle said:
Okay - you guys win. I ordered a red one, through I might spray paint it yellow and black just to be different.One vendor said these were discontinued, and they are no longer available at Wal-mart. None could be found on Amazon Prime. So I'm wondering what the future holds for the Leap.
Not sure about prime, but it's in Amazon as of now...and none blue!

-
Wanted to get a true review up of the Leap before I start modding the tool.
Sorry its a little long.
Cheers,
H.G. -
@Juan el Boricua said:
Not sure about prime, but it's in Amazon as of now...and none blue!
Ebay has a few of each color, including blue

-
Some quick videos, an update on the tool and another showcasing the one handed mod.
The Mod for OHT Blade was so easy to do...its amazing that it didn't come this way. Very easy to use one handed now.

Cheers,
H.G. -
Great job making it OH, HG

-
Great job.
To do it to the saw, you could actually drill a hole in the actual saw to make it thumb accessible instead of nail indented.
I think they made it that way so kids don't deploy it in a hurry.
-
Awesome job making it more accessible!

-
Making a fashion statement
Colour coordinated.

-
@Happy Gilmore said:
Some quick videos, an update on the tool and another showcasing the one handed mod.The Mod for OHT Blade was so easy to do...its amazing that it didn't come this way. Very easy to use one handed now.

Cheers,
H.G.Have you gotten around to unscrew the blades side?
Seeing that the straight blade is on the same pivot that the saw. Would it be possible that the saw have the same flat spots on the pivot and could be modified to be detached like the straight blade?
It would need a bit of extra work leaving a little bump for the liner lock to slide on. Also I think I can see a washer in there which the blade doesn't have.
Just throwing ideas here.
-
There is a picture if it on my Pinterest board but the pivot tapers down to the thinner diameter. The side with the saw doesn't have the same Mechanism so no dice. On the other hand u can mod a wave saw to slot in to the blade slot and put a file on the saw side. If you really want true bladeless. Strangely the liner locks have a curved portion that lines up perfectly with rebar/blast internal tools. They won't lock but they open fully and snug. Video later on this.
Furthermore u can use a Leatherman charge spacer to step down the pivot diameter on a wave file to slot on that side as well.
Is having a saw an issue?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
