Gerber Mr. Pinchy Multi Plier Club
-
Wow! Great list and information. Thank you, Greg!

Looks like I need to reclassify some of the ones I listed, based on the information. Will do that at some point today.

I felt lucky getting a V1 BO and V2 BO, as they seem to be extremely rare. :ahhh
The biggest difference I've noted with what I've been calling V3s, is that there are two very different pliers designs. One with a classic smaller plier pivot and clean casting and ones with a larger pivot and casting flaw in the mounting areas.
-
Top row:
V1.0 FPR, V1.1 BO, V1.2 SS, V2.0 SS, V2.0 BO, V4.1 BO(older pliers head), & V3 SS.
Bottom row:
V4.1 SS(older pliers head), V5 BN SS, V5 NN SS, Fiskars(with awl and file - awl instead of can opener - factory), CK&T old, & CK&T new.I'll take an updated photo at some point as well to put the V3 before the 4.1 BO.

-
Here are two photos showing(what you've designated V4.1) the two different pliers heads on the 4.1. All of this(with 5142721/5212844/PAT.PEND on handles) have either og these two pliers heads from what I have seen. And the later, larger pivot, usually has casting flaws in the mounts. Doesn't hurt the function, but is cosmetically ugly.
The two different heads, and both have the small nut/bolt fasteners in the pivot centers.

The inside, where the casting flaws are obvious.

Some early MP pliers heads also had casting flaws aound the mounts, but not as gnarly as the flaws on the lg. pliers pivot on the 4.1.
-
@gerleatherberman said:
Doesn't hurt the function, but is cosmetically ugly.
-
Basically. Yeah.

-
<u>Corrected order and version designations.</u>
V1.0 FPR, V1.1 BO, V1.2 SS, V2.0 SS, V2.0 BO, V3 SS, & V4.1 BO(older pliers head).
Bottom row:
V4.1 SS(older pliers head), V5 BN SS, V5 NN SS, Fiskars(with awl and file - awl instead of can opener - factory), CK&T old, & CK&T new.Full view.

Top row close.

Bottom row close.
]Top row open.

Bottom row open.

Top row side-by-side.

Bottom row side-by-side.

-
New member. Only got the one though >:D

-
@Dutch_Tooler said:
New member. Only got the one though >:DVery nice, D_T!

A must-have for any MT enthusiast and a real piece of MT-history.

-
Thanks

First impressions:
It feels solid and hefty, yet compact; very beefy sheet metal used for the handles. Built for life. Better feeling in that respect than the CD I idly handled at Paragon when I bought the Wave+ last year. Quick-draw stubby nose pliers (refreshing after all these needle nosed ones on all the tools nowadays). Nice file too (much better than what SOG offer currently). Inner implement extraction is a multi-step procedure though.There is a little bit of rattle in the slider mechanism - I wonder if I can tighten the slider screws just a tiny bit without impeding the sliding movement. I assume these are loctited?
-
No need to worry about the rattle. That is inherent to all sliding pliers Gerbers. That is why I am always yapping about the Multi-Pliers being the most reliable MTs made. Loose tolerances makes for tools that hold up longer than tight tolerance tools. :)
You can try tightening the screws possibly, but the loctit is so old it break free easily without heat. Tightening will make the tool less confidence
And for grip/splat, the Multi--Pliers is a bear. .

-
Pinchy fun-night.







-

An impressive array GLBM

-
An impressive array GLBM

Many thanks, D_T!

Just two more Pinchy versions to locate and I will consider the OG Multi-Plier group complete. A BO NN V.5 and a BO BN V.5. :ahhh
-
Hello - I am new to this forum (actually, any forum) so ask for leniency as I probably commit forum-etiquette faux pas. I inherited this Gerber multitool and while I fancy my internet search skills I can't for the life of me figure out what model this is -- or what the purpose (tool) the hook is. I mean, I get the basic idea of a hook, but I've never seen a hook like this on a multitool ...
I asked Gerber (twice) but never got a reply. I hope I attached the picture properly. Any assistance anyone has is greatly appreciate.
Thank you.jpg)


.jpg)
-
Early Trailrider perhaps? Looks like a hoof pick. Either it is a really rare Trailrider-type run, a prototype equestrian MT, or someone made it(to act like the later Trailrider).
Welcome to MT.o, Go Army! -
@gerleatherberman said:
Early Trailrider perhaps? Looks like a hoof pick. Either it is a really rare Trailrider-type run, a prototype equestrian MT, or someone made it(to act like the later Trailrider).
Welcome to MT.o, Go Army!Thank you - took me a few seconds to even figure out how to reply. I thought about the trail rider but that looks like a more pronounced "L" than this hook. Based on your experience does this seem a factory-type tool or more, as you say, a sort of made-up tool? do you think this is an original? I'm not concerned about value, just trying to figure out what this is .. the other Gerber I have was a gift from the Army for a trip to Iraq and that one is easy to find out about -- so really just sort of fascinated by this (hoping it's not counterfeit, as I'd hate to unwittingly support that indirectly). Thanks
-
Welcome to the boards mate.

Have a look around the pivot area and see how well the machining matches up with the other tools.
It's definitely a cool piece. -
@zoidberg said:
Welcome to the boards mate.
Have a look around the pivot area and see how well the machining matches up with the other tools.
It's definitely a cool piece.I own another multiplier (don't have picture) but this one (the one in question) seems nearly identical in quality, etc. - I feel confident it's not a counterfeit based on the other two I own (but I guess that's the point of a counterfeit ... to look real). Sort of really sounding ignorant, but is the value of a hook tool? Truth told I won't use it, it will be put in a drawer as it seems to have some "value" (even if from a novelty standpoint...) and it would be a shame to ruin it....thanks
-
with zoidberg. That's a good idea. Maybe a photo of the pivot but-end would shed some more light?@Go Army, Beat Navy said:
Thank you - took me a few seconds to even figure out how to reply. I thought about the trail rider but that looks like a more pronounced "L" than this hook. Based on your experience does this seem a factory-type tool or more, as you say, a sort of made-up tool? do you think this is an original? I'm not concerned about value, just trying to figure out what this is .. the other Gerber I have was a gift from the Army for a trip to Iraq and that one is easy to find out about -- so really just sort of fascinated by this (hoping it's not counterfeit, as I'd hate to unwittingly support that indirectly). ThanksYou're quite welcome.

It is a curiousity for sure. The prototypes don't seem to fetch a premium these days. The old, "is it collectible when only one person can get it?" idea.
But as an oddity, factory or homemade, it is really cool. :)Gerber doesn't tend to have production tools with tools shaped like that. Like you mentioned, the Trailrider is abruptly styled/shaped and the Trailrider pick seems more at home in a Multi-Plier than the tool pictured. Doesn't mean it isn't a factory prototype though. It very well could be. :)
-
@gerleatherberman said:
with zoidberg. That's a good idea. Maybe a photo of the pivot but-end would shed some more light?
You're quite welcome.
It is a curiousity for sure. The prototypes don't seem to fetch a premium these days. The old, "is it collectible when only one person can get it?" idea.
But as an oddity, factory or homemade, it is really cool. :)Gerber doesn't tend to have production tools with tools shaped like that. Like you mentioned, the Trailrider is abruptly styled/shaped and the Trailrider pick seems more at home in a Multi-Plier than the tool pictured. Doesn't mean it isn't a factory prototype though. It very well could be. :)
Firstly, welcome to MTo. You've come to the right place to discuss old Gerber MTs

Definitely an interesting odd ball. I'm sure it is a genuine Gerber Multi-Plier (a.k.a. "Mr Pinchy"), but that hook is new to me.
I have never seen a tool like that in a Mr Pinchy (and I have seen a number of different Gerber prototypes, I even own some of them). As said, it doesn't look even remotely like the hoof-pick that Gerber put in their MP600 TrailRider.
Does it look like a finished, ready-for-production tool, or is it a bit rough around the edges ? If it looks like a well finished component then I would guess it is either a Gerber prototype, or someone had decided to make their own custom-made component. Most Gerber prototypes I've seen are quite well finished an all components.
Can you tell us a bit more about where it came from before you got it, that may shed a bit more light on its origins ?
I have a prototype Mr Pinchy with a Golfer divot tool that I'm sure was made by Gerber, but it never made it to production.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login