ZapWizard's Leatherman Free P4 Mods
-
Check out his store. Lots of cool tool accessories. :)
-
@zoidberg said:
I mean it interrupts the line between the edge and the back of the blade.
When cutting the thumb tab will snag.
IMO this reduces the effective length of the blade or saw.I definitely agree for the saw. And honestly, I didn't even think about it. Other than the saw I have never used the full depth/length of any blade myself.
@gerleatherberman said:
I'm ordering a set of thumb tabs in white this weekend.
FYI: Nylon is an absorbent material. Lighter colors will show dirt quite quickly.
@Juan el Boricua said:
ZapWizard, those are really good -looking, well-designed accessories you made...kudos to you Sir! Will you consider doing the thumb tabs and sheath for the gen2 and 3 Waves? I'll be interested in two sets!It is on my list of projects to tackle someday.
-
This project is awesome, very nice work Sir

-
@SirVicaLot said:
This project is awesome, very nice work Sir


-
Some more
from me. Definitely interested in the bit holder... -
Thanks for the info, Zap!

After installation, would a few coats of cyanoacrylate do the trick in creating a strong stain resistant barrier?
I know it would keep them from coming out easily for sure. :ahhh -
The Nylon is solid but still absorbent. As all nylon materials are. The surface is a bit more so just due to the sintering process this will smooth out quickly. Then be easier to clean. But sealing it with a clear coat or super glue should work.
The Nylon also has a higher melting point than the softening point of super glue. So if you want to remove them you can try heating the glass surface gently to release the glue. Similar to how folks use CA glue to hold items onto a lathe plate.
-
Many thanks, ZapWizard!

-

Okay, I have my prototype bit holder modification. Reminder: This uses a 3D printed piece and a magnet to hold the Leatherman Flat Hex interchangeable bits

The good news: The bottle opener works great. :D
The sintered stainless steel material is very strong. It took several minutes of drilling to ream out the 1/4" deep magnet hole to fit the magnet just right. I have no doubt it will hold up to some heavy torque.
The surface is pitted, as a result of the sintering process. But the surface is polished and actually quite low friction. There will be no issues deploying the tool (once the profile is tweaked, more on that later)

The bad news: The bottle opener cutout makes holding a bit straight impossible. >:(

The magnet inside does a good job of holding the bit in, but not straight. It can easily tilt away. I will have to skip my precious Topo Chico, or find another solution.
The internal magnet also doesn't interact with the tool catch magnet at all, so no worries there. The stainless steel is attractive enough to hold close the same as the other tools.

I made the prototype as a way to test the tolerances of the material, as well as the general fit and strength.
I did screw up, in that I followed the profile of the blades, and not the other tools. You can see this in the image above, the blade have a more difficult to deploy profile, while the smaller tools have more of a curve to make them easier to deploy.
Right now the open latch effect isn't as solid as I want. So I will have some re-designs and another prototype or two.
There are a few options to preserve the bottle opener:
-Modify the can-opener tool to work as a bottle opener (Like the Wave does)
-Make a can-opener bit. (I sort of am leaning towards this one)
-Try to figure out some other placement for it on the bit holder (will work on this also) -
The video on the holtser is now live:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
My2cents, maybe focus on a bit adapter for the small bits, the ones used by victorinox cibertool
-
@Raoul Octav said:
My2cents, maybe focus on a bit adapter for the small bits, the ones used by victorinox cibertoolYour referring to 4mm percision bits.
But the Leatherman bits store flat which is really nice. That being said, using 4mm bits would be so so so much cheaper and give the tool access to tons of other proprietary bits. It also opens up a lot more space on the tool because they are smaller than Leatherman bits.Now that you mention it, I'd probably prefer the 4mm bits overall because of how easy they are to replace. A full set, including a spare driver costs less than 10$.
-

Here is the re-designed non-can opener version. It can probably keep the 1/4" hex opening.
I am not quite happy with it. The flat end doesn't look great, but is needed to keep up the material thickness.
@Raoul Octav said:
...maybe focus on a bit adapter for the small bits, the ones used by victorinox cibertool
Since this will be a product mostly for tool modders, that is a good idea. I use a set of 4mm precision bits constantly at work. The only catch is they don't have the larger Torx and screw sizes.
Above is a mock-up image, showing a 4mm bit will fit nicely, and won't require the 5 degree tilt. I may even be able to get the can opener back in.I may be able to develop both at the same time, it would just double my prototyping costs. :-\
-
Here is the re-designed non-can opener version. It can probably keep the 1/4" hex opening.
I am not quite happy with it. The flat end doesn't look great, but is needed to keep up the material thickness.

Since this will be a product mostly for tool modders, that is a good idea. I use a set of 4mm precision bits constantly at work. The only catch is they don't have the larger Torx and screw sizes.
Above is a mock-up image, showing a 4mm bit will fit nicely, and won't require the 5 degree tilt. I may even be able to get the can opener back in.I may be able to develop both at the same time, it would just double my prototyping costs. :-\
Seriously bro, u are amazing. I was going to hold off on the p2 or p4, but you might be forcing me with how awesome these are. I'd do a poll to see which one is more likely to get bought. Sales from one can help offset the other. I do think the 4mm/ bottle opener might be very enticing. Is the 1/4" hex hole still possible with that setup? If so than the 4mm would be better because it's basically a 3 in 1 tool. I'd definitely buy that. Especially since that means it can use the two most common bit shapes. In modding I use the percision bits over the leatherman ones 90% of the time.
-
Interesting option to use the 4mm bits
. That combined with a cap lifter and 1/4" hex would be awesome 
-
That looks excellent ZapWizard

-
@Dutch_Tooler said:
Interesting option to use the 4mm bits
. That combined with a cap lifter and 1/4" hex would be awesome 
A 4mm setup would also likely be stronger because of it's shape. This would also benefit a 1/4" hole.
Imagine if you could add a T-shank exchanger instead of serrated blade. That would let u use the surge saw and file setup..now I'm dreaming
-
that would be great

-
Oh, wow :o Awesome work ZW

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login