Leatherman Free P2/P4 Club and Feedback Thread
-
It is normal for the P series, but tightening the pliers mount screw bolts a bit gets rid of a lot of it. Though, as a consequence, it doesn't flip around quite as freely. I find it perfectly usable when tightened up a bit though. :)
-
Allright then... Got myself a P2... More suited for my needs... Yet... I have some points to stress:
On the pliers side, one side has too much space. I need to tighten it. For the price, i wished LMN did that (hear me LMN? Do you hear our feedback)
Pocket clip aint that cool after all, way to high. I'm gonna loose it, aint my style after all.
I like the slimness and the fact that one side of the scales are... Curved somehow 3D( not flat) , would have been nice to be on both sides.
Wayyy wayyy to gressive with the serrations on the blade.
Other than that... I like it more than the P4.
P4 is thicker, flatter and has a saw and a serrated blade as extra. If it had a saw and file, than P4 would have ruled them all.

-
Congrats, Raoul!

Man, that is a boneheaded mistake from the assembler team with the screw not tightened down at all.

Out of curiousity, is your P2 dated?
-
No date code.
-
Know what bothers me the most? I want the P4 but can't believe that they chose to put a lanyard ring on the heavier tool...how does that make any sense? Shouldn't the p2 have the lanyard or each of them have both?
-
Now, that i used them both it makes sense.
Either way, new batch has pocket clip.
Pocket clip is quite big, high, stand out and affects the ergonomy. It does the trick while the tool is in the pants, yet it is too big.
P4 is quite thick, with the pocket clip it would have been too thick in that particular area. -
@Happy Gilmore said:
Know what bothers me the most? I want the P4 but can't believe that they chose to put a lanyard ring on the heavier tool...how does that make any sense? Shouldn't the p2 have the lanyard or each of them have both?I thought Leatherman changed this, I believe they sell the P4 with the pocket clip now on their site.
And if you get one with the lanyard ring, you can contact them and they'll send you a pocket clip (not to all countries apparently, but I guess being in the U.S. you shouldn't have any problems). I'm still waiting for mine ...
-
@Top-Gear-24 said:
I thought Leatherman changed this, I believe they sell the P4 with the pocket clip now on their site.And if you get one with the lanyard ring, you can contact them and they'll send you a pocket clip (not to all countries apparently, but I guess being in the U.S. you shouldn't have any problems). I'm still waiting for mine ...
Brilliant, gj Leatherman.

-
I kind of follow this topic since the tool is out and agree but also disagree with some comments. Anyway I could not hold myself back longer and managed to put my itching hand on a P4.

First impression is as others said it’s a good tool. But definitely didn’t worth the asking price, not in the UK anyway.
I’m missing the changeable bits, the file looks short but quite aggressive even feeling it with my hand. The most useless tool on it the ruler. My model has a bit of a stiff pliers jaws pivot. Not sure if that’s the same with others I hope it would brake in soon. Time would tell how can this serve as an edc I guess.Good evening to you all (at least those in the UK/Europe) and good morning/afternoon to the rest of you!
I've just joined and so this is my first post (be gentle) Over the past 30 years I've had most of the classic LMT stuff, not to collect, but to use for my day job (Forces/Police and now Customs work, CBP in the states) I also own a couple for my voluntary role, SAR. However, like most here I also wanted to purchase a P4 (or maybe two) but just like others in the EU, was put off by the price. I have emailed LM customer service to ask about the disparity in price (US vs Everywhere else) and await a final response.
I will, of course, keep you updated as to their reply regarding the US vs EU (or in my case UK) pricing structure which, for those of you Stateside is $247 USD or £189.99 GBP) The most I've paid previously was for my last LMT (the original Surge) which now needs replacing and was £130 (or $164, based on todays rate)
That seems like a bargain compared to the P4 and, to make matters worse...I can't find my original PST anywhere....
Take care all and stay safe!
Darren.
-
Welcome to MTo Darren

Let us know when you receive something. I don‘t think we will get more than marketing blabla, but will see

-
Good evening, and welcome to
Darren.
Would like to hear LM's reply if you receive any
... hour you'll find your PST

-
Hi Darren and welcome to

-
Where did you get the pocket clip, I need one yesterday

-
Welcome to
Darren and 45and9 
-
Peeps in the UK.
The local Leatherman support Whitby&co has the pocket clips for the P4s. The drawback is they wont send them out. They need the P4 to be returned under their warranty service as only they can replace the pocket clip :P.
I decided I'm OK without the pocket clip, will buy one when become widely available...The above is just for info if anyone interested to get a free pocket clip in the UK.

-
I received my replacement P2, and honestly, I am still happy with the multi tool.
I gave the tool a solid going over with a dry Teflon spray and everything is like butter now. Smooth and fluid.My only real issue(s) is the play in the handles and the loose feeling when closed. By loose, the amount of travel the pliers have inside the folded handle. You can slide the closed halves up and down quite a ways and get a clacking sound from the pliers hitting the internal stops.
I was seriously thinking about the P4 but aside from a saw, there wasn’t enough to justify the increase in size and weight.
The P2 feels a little more “elegant” and balanced to me.Sent from my iPhone using Tapatalk
-
@Wpgwave said:
I received my replacement P2, and honestly, I am still happy with the multi tool.
I gave the tool a solid going over with a dry Teflon spray and everything is like butter now. Smooth and fluid.My only real issue(s) is the play in the handles and the loose feeling when closed. By loose, the amount of travel the pliers have inside the folded handle. You can slide the closed halves up and down quite a ways and get a clacking sound from the pliers hitting the internal stops.
I was seriously thinking about the P4 but aside from a saw, there wasn’t enough to justify the increase in size and weight.
The P2 feels a little more “elegant” and balanced to me.Sent from my iPhone using Tapatalk
Glad the replacement is working for you, Wpgwave!

I wasn't really o.k. with the looseness of the handles either, so I tightened the pliers mount screws a bit and haven't looked back. It still flips open flawlessly and feels tight. :)
The design calls for really loose handles, but that isn't something I'm used to or want. Easy fix. :) -
A comparison between the P4 and the OHT would be interesting....
The P4 might even win the file comparison. ;) -
To be honest, it isn't even a contest for me. The OHT is just too big and clunky with tiny implements compared to the P4. The P4 is compact, good looking(that one is admittedly subjective), smoother, far more precise, and has better implements(except for oxygen tank wrench and strap cutter, which the P4 doesn't have, but the P4 makes up for it with a short(but very high quality) file, drivers, a tool that does kind of work as an awl, and scissors). The P4 makes the OHT look archaic and cumbersome. :ahhh
The OHT is the tool LM should have lambasted to promote the P4 instead of the venerable Wave. :(
Ya know, I guess I can do some comparison photos later today.

The OHT is not a bad tool, but it really isn't comparable to the P4 in most aspects. IMO of course.
-
I meant a usage comparison.
I like the OHT.... :'(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login