New Style Magnifying Lens Issue
-
I have only one of each, and I also feel as if the latest version is the best so far.
Good function overall, good magnification level, large field of view.
I haven't heard any reports on the frame braking either.
They shouldn't fall out of any version though, so it seems only safe if they'd drop a tiny bit of glue in the latest version from factory.My guess is that the thinner frame allows for more flex (especially since it's see-through plastic, which isn't as hard as solid plastic).
Does anyone of you with this problem forced out the lens to begin with? Just to see it pop out? Or did anyone buy his/hers second hand? -
Edit: Please disregard the joke. I apologize for not realizing how offensive it would be and apologize for writing it. Apologies specifically to T-G and Mechanickal. A big mistake on my part. :-[
Original text:
Oh my. <u>Seal Team Vic</u> is in full defense mode about them mag lenses. -
@gerleatherberman said:
Oh my. <u>Seal Team Vic</u> is in full defense mode about them mag lenses. :ahhhWhy do you always see things in a "them vs us" way ?
Aren't we here to talk about tools and to share our knowledge of (and experiences with) them ?
Edit: We don't have Seal Teams over here, we have Para-commando's.
Let me explain it to you, Para-commando's vs Seals are a bit like a Wave vs a Free, a lot less bells and whistles but just as practical ;).
-
Please tell me where I went into defending Victorinox?
I said that I haven't had any issues with the latest lens.
I openly admitted that it's something that shouldn't happen and that Vic could glue the lenses themselves as a plain and simple solution to this.
I further speculated about a possible cause. Since it only seems logical that the frame could weaken if someone was to pop the lens in and out of his frame multiple times.
I honestly feel it all made more sense than saying someone must have tampered with some bolts and screws to put a tool in a bad daylight.
I also feel as if you enjoy trying to put people in Victorinox and Leatherman camps since there's not a single week that passes by lately without someone being called a hater or a "defence team".I have always been open and honest about flaws in Vic designs when I see them.
Feel free to point out where I didn't.I never said I hated your beloved tool variants, only the extreme prices they catch these days.
Why do they catch less comments for it? Because their tools cost a third or quarter of the competition and is repairable with a drop of glue in this case.
-
@Mechanickal said:
Please tell me where I went into defending Victorinox?I said that I haven't had any issues with the latest lens.
I openly admitted that it's something that shouldn't happen and that Vic could glue the lenses themselves as a plain and simple solution to this.
I further speculated about a possible cause. Since it only seems logical that the frame could weaken if someone was to pop the lens in and out of his frame multiple times.
I honestly feel it all made more sense than saying someone must have tampered with some bolts and screws to put a tool in a bad daylight.
I also feel as if you enjoy trying to put people in Victorinox and Leatherman camps since there's not a single week that passes by lately without someone being called a hater or a "defence team".I have always been open and honest about flaws in Vic designs when I see them.
Feel free to point out where I didn't.I never said I hated your beloved tool variants, only the extreme prices they catch these days.
Why do they catch less comments for it? Because their tools cost a third or quarter of the competition and is repairable with a drop of glue in this case.
Euh, I mean
.But what did you expect, He's my teammate :D.
-
I am wondering where in the hell LM was brought up here? If it was inferred, I apologize you feel that way, but what I said was meant to be silly.
LET ME EXPLAIN.We were discussing possible ways that Vic could improve the next generation of mag glass and Phillips shank. Nothing about LM there. Then two very well written posts, implying that the new mags are actually better than the old ones, and I said Seal Team Vic. I'm sorry you have a chip on your shoulder, guys. Don't know what else to say about that.

I don't even have a favorite brand, and that serves me well. If you want to argue that, then go read my numerous posts in the SOG and Gerber forums, as well as the C & C and collectors forum.
I'm done in this thread. The mag frame is not important in the big picture, and certainly not worth arguing over. We just don't have much else to talk about.

-
I try to read threads completely if they aren't endlessly long.
In this same thread you mentioned:
@gerleatherberman said:
Kind of funny, that when Vic has a quality issue, they don't get lambasted like most other companies do.
And you add the "Seal Team Vic" last.
As if I'm overly biased towards Victorinox, which I always try to avoid.I'm only counting up the sum of posts, rather than looking at every post as a singularity.
-
I was just trying to understand how big of an issue this was, how many people have had this problem with the lens falling out, nothing more ...

Like I said, I own three SAKs with the new style lens and none of them have this issue, I wanted to know whether I just got lucky or this problem is more of a 1 in a 1000 (or 10.000) problem. Just to see if I should think about this when I decide to buy a SAK with the new style lens in the future. Which means, only buying them at a store where I can check the lens first, so no online buying anymore, if you know what I mean.
That's also why I wanted to know if there were any other known problems with the new style plastic lens holder, like breaking or cracking, just as I asked ? No hidden agenda behind it, no Vic promo for whatever reason I would do such a thing ...
I did find it strange that you made this comment:
@gerleatherberman said:
I would bet my left foot that Victorinox is fully aware of the issue. I've personally sent several emails to them about it. But, I am not paying the shipping to send mine back and wait weeks for another one. Shipping costs a lot more than super-glue. :PKind of funny, that when Vic has a quality issue, they don't get lambasted like most other companies do.

But I decided not to go into that, just to make sure not to stir things up. But since SHTF now, I might just ask ...
You have an issue with a SAK but are not willing to ship it to Victorinox and wait to get a replacement, right ?
Then what is it you expect Victorinox to do exactly ?
Send you a tube of glue/epoxy to fix it ?
Send you a new SAK without you having to send yours to them ?
Send over a technician to come and fix it at your home ?I mean, isn't that how warranty works, you send in your broken/flawed product, they examine the problem and either fix it or send you a replacement, right ?
I know that's the way I did it when I had to get something fixed under warranty, and in one case I even had to pay shipping twice (20 Euro each time) because the replacement tool they send me was used way more than the one I send in ...
Warranty claims suck, and you have to do things you shouldn't have to do when you've bought a brandnew tool, but sometimes, sh*t just happens ...
I still hope to get a better view on just how much of a problem this lens issue is, since it has me a bit worried.
-
For the record, with two straight weeks of carry, and a ton of use, my new Warthog SwissChamp has had no issues with the glass magnifier lens popping out. I also greatly prefer the optical quality of the new glass lens. It’s soooooooooo much nicer to use.
With that said, my outdoor SwissChamps are all of the older variety. My need for DEET based insect repellents kind of rules out the newer SwissChamps, since the clear plastic magnifier housing reacts to DEET. The older grey nylon magnifier housings are immune to my greatest wilderness machinations.
-
@Buzzbait said:
For the record, with two straight weeks of carry, and a ton of use, my new Warthog SwissChamp has had no issues with the glass magnifier lens popping out. I also greatly prefer the optical quality of the new glass lens. It’s soooooooooo much nicer to use.With that said, my outdoor SwissChamps are all of the older variety. My need for DEET based insect repellents kind of rules out the newer SwissChamps, since the clear plastic magnifier housing reacts to DEET. The older grey nylon magnifier housings are immune to my greatest wilderness machinations.
That's the stuff I wanted to hear, so another one without the "lens popping out" problem, and a good reason to prefer the grey lens housing over the new one
.Thanks for sharing your experiences Buzzbait
. -
@ulzhan said:
How about a layer with the old and the new philips together?:D
They won't fit, even with a modified spring to make each side 'work'.
And the old style is never coming back...especially not the old phillips length. Too much was done to make the light module, mag and phillips fit in with any combination and for the phillips to fit in either side. I only choose the newer parts for a mod if the light is going to be one of the tools.
The gray mag might be able to fit in the space of the new glass mag. I think the dimensions are pretty close, not like the plastic mag which was much larger on the round end.
...
FWIW, I haven't had any of my new '12+ glass lenses pop out. Most spin freely. I like it enough and generally prefer it, but don't care for the short phillips that go with.
-
@kamakiri said:
They won't fit, even with a modified spring to make each side 'work'.And the old style is never coming back...especially not the old phillips length. Too much was done to make the light module, mag and phillips fit in with any combination and for the phillips to fit in either side. I only choose the newer parts for a mod if the light is going to be one of the tools.
The gray mag might be able to fit in the space of the new glass mag. I think the dimensions are pretty close, not like the plastic mag which was much larger on the round end.
...
FWIW, I haven't had any of my new '12+ glass lenses pop out. Most spin freely. I like it enough and generally prefer it, but don't care for the short phillips that go with.
So, another one without the "lens popping out" issue, and yes, I understand how the short phillips can be a dealbreaker for some.
Thanks for sharing your experiences Kamakiri
. -
@Top-Gear-24 said:
So, another one without the "lens popping out" issue, and yes, I understand how the short phillips can be a dealbreaker for some.**Thanks for sharing your experiences Kamakiri **
.
You're welcome, Top-Gear. Best reason to be part of the forum! -
I rarely use the magnifier on my Champion Plus (bought new on Amazon just a couple of years ago), but lately I needed it a couple of times, and both time the lens popped out when I opened it. :(
- FiL
-
Second time was a charm with Amazon. I sent back the "new" Explorer that arrived with a plastic magnifier, and got a new glass magnifier model this time. Unlike my Warthog SwissChamp, the glass lens in this newest Explorer doesn't rotate within the housing. It's a very tight fit.
From an optical perspective, I don't see much difference between the new glass and the plastic magnifier. The glass may distort a bit toward the edge, where the plastic does not. But overall, the new glass lens is very nice. I hardly notice any difference in level of magnification between the two. If I didn't already know they were different levels of magnification, I'd probably never suspect.
-
Been carrying my 'champ more often, so I did the logical thing...and ordered a backup.

First time I opened the magnifer...bloop, out it fell. Both my current carry and the new are the new style lens. I noticed the box had tape over the unstickered end - was this one already a return? I'm sending it back, so hopefully the new one won't have the issue. Just another data point for those who are interested...
-
Unbelievable.
The factory videos have us believe every tool is opened in QC before packing it up and sending it out... -
Well, I'm sure it was opened at the factory. It came from that river 'site and, like I mentioned, there was tape on the unstickered side of the box. I suspect it got returned, somwbody popped the lens back in, was satified that it stayed, taped it up and put it back on the rack.
Unrelated, but that river 'site lists the swisschamp as "discontinued by manufacturer"...?
-
I wonder if heat from shipping the new style tools with the clear frame is partly responsible for the frame warping and allowing the lens to come out. I am not very familiar with different plastics and their heat resistances, but just a thought.

I just don't see Vic QC not checking the lens retention at the factory.
-
Whatever it is that causes this issue, I hope Victorinox will look into it and fix it.
Since this lens problem is becoming a bit of a blemish on the Swisschamp's reputation.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login