PowerPint Overview Mighty Little MT
-
@ReamerPunch said:
Thanks for the pic, Sam.
I hope SOG has been following this thread.
pretty sure someone from there is in here. Stalking.. 
-
I've put together a mini bit kit to extend the capability of our nimble Pint.


-
@roamingcat said:
I've put together a mini bit kit to extend the capability of our nimble Pint.Very nice setup, roamingcat!

-
Thank you GLBM ! I am working on your scissors mod for the Pint, hopefully I'll get there soon

-
@roamingcat said:
Thank you GLBM ! I am working on your scissors mod for the Pint, hopefully I'll get there soon
Looking forward to see what you come up with, RC! I keep hoping SOG will make another version of the Pint, but with the Litre's swing latch, nice scissors, and driver-tips(like the ones we did) on the openers. But, that said, not gonna hold my breath on that one. :ahhh
-
@gerleatherberman said:
Looking forward to see what you come up with, RC! I keep hoping SOG will make another version of the Pint, but with the Litre's swing latch, nice scissors, and driver-tips(like the ones we did) on the openers. But, that said, not gonna hold my breath on that one. :ahhh
I very much look forward to PP version 2. I think it would be a killer edc, at least it would be for me. I finally went ahead with the scissors mod. I was only able to hand file down the tang a little bit, so not quite as good as yours. But I can see it does ease the spring tension a bit so hopefully it gives it more longevity. Thanks again for the idea. 

-
@roamingcat said:
I very much look forward to PP version 2. I think it would be a killer edc, at least it would be for me. I finally went ahead with the scissors mod. I was only able to hand file down the tang a little bit, so not quite as good as yours. But I can see it does ease the spring tension a bit so hopefully it gives it more longevity. Thanks again for the idea. 
Very nice. And you're certainly welcome.
Glad it feels more reliable thay way. Definitely a mod worth its' weight in gold.
It amazes me, that with this thread being such a resource for future SOG design, that SOG representatives aren't clamoring to do these mods as updates. Thank you again for getting the ball rolling with the driver mod. :) -
Here's a question, do any MT's have a saw that could replace the file? I don't use files very much anyway, but I use saws surprisingly often.
-
Also, would the power access be worth missing like this or is it just too much of a failure even as a base? I like the slightly larger size as the rebar seems to be the perfect size to me
-
As far as I know, there isn't a drop in saw for the Pint. :(
It would be pretty short as well, since the compound leverage mechanism takes up some real estate in the handles. :ahhhThe PowerAccess and Access Deluxe are "like it or hate it tools."
My position is this: The PowerAccess(base model with pocket clip) is a good tool if you can find it for $30 or less. The Deluxe is a good tool if it can be found for $50 or less. Still probably a bit too expensive for their placement on MT hierarchy, but you do get good CS from SOG and they look nice. The Deluxe has a decent wood saw, but it is a bit on the short side. Well cut though and usable. The Access and Access Deluxe files have been pretty low-tier as far as I know, but it has been a while since anyone I know of has bought one. Hopefully SOG has since updated the file cut profile.
-
So would the power access make a good base for modding, though? I like how useful this powerpint is with these mods, but would like a slightly bigger size. I know some of you have experience with both, and I'm just curious if there is something about the power access that wouldn't make it worth modding or prevent one from easily modding it. I'm sorry if I'm not being very clear in my questions

-
I see. It will depend on the variety of parts to mod with and the skill level of the modding. But, as far as I know, there are no drop in parts. Anything used as a part to mod with would need a tang large enough to shape to work. Then the pivot size may be wrong, where a bushing may need to be made if the modded part has a pivot to large, or you'll need to drill it out for a larger size. Best case scenario is the the implement you'd like to transplant has the sane pivot size and a large tang that can be profiled to fit.
So, in short, the Access is not an ideal tool for modding right now.
The PowerAccess Deluxe has a wood saw, so that may be a better start.
SOG's older models(PowerPlier, PocketPowerPlier, PowerLock, and PowerAssist) are compatible with some of the older Leatherman implements, and vice versa. -
I have one. I like it, however I would make the point that it is not a full sized tool. It's not as robust as a full sized tool, but it's much better than, for example, a PS4. The blades are very impressive, and as someone who wears glasses the jewlers screwdriver has proven an absolute Godsend.
Personally I find it a very useful accompliment to my SAK Huntsman.Huntsman,
Powerpint,
BIC lighter x 2.
AAA LED Maglite.
That's me good to go. -
@leigh.ratcliffe.5 said:
I have one. I like it, however I would make the point that it is not a full sized tool. It's not as robust as a full sized tool, but it's much better than, for example, a PS4. The blades are very impressive, and as someone who wears glasses the jewlers screwdriver has proven an absolute Godsend.
Personally I find it a very useful accompliment to my SAK Huntsman.Huntsman,
Powerpint,
BIC lighter x 2.
AAA LED Maglite.
That's me good to go.Nice setup of tools there for sure!

-
Is it just me, or does the PowerLitre come with a lock to hold it closed?
Charles.
-
Why the hate on the PowerAccess files? They work GREAT on metal. Not stainless (it will damage the file), but mild steel and aluminum are cut quickly and easily. The PowerPlay file, now that is a bad file. It's not even useful for fingernails.
Also... would it be possible to grind the bottle opener into a screwdriver blade? Might make it harder to open, but with clumping that's not really that big an issue.
Charles.
-
@roamingcat said:
I've put together a mini bit kit to extend the capability of our nimble Pint.If you use the Victorinox bitdriver extension, it has a smooth flat shank without the cutout for quick-release holders. Meaning, there is more flat surface area inside the area that grips the bits, and it doesn't wobble as much.
Charles.
-
Just discovered the SOG PowerPint at the local outdoorshop, and I thought it was strange that I'd never heard of it before...
When I got home I found this topic, that for some reason, I had missed completely 🙄.
Anyway, inspecting it at the outdoorshop I thought it looked like quite a decent tool in a small package.
So I thought, why not make the first tool I buy in 2021 a SOG (which is definitely a first for me, since I only own 3 other SOG products after 26 years of
hoardingcollecting multitools).So here it is:

And I must say, I'm surprised by the quality of this one. I expected tools rubbing against the plier head, locks that needed a bit of adjusting, a PE blade that needed sharpening...
But turns out SOG has it all covered on this one, only thing I might mod is the spring on the scissors, just like GLBM did on his PowerPint.
I actually like this little tool 😁.
-
@Top-Gear-24 said:
And I must say, I'm surprised by the quality of this one. I expected tools rubbing against the plier head, locks that needed a bit of adjusting, a PE blade that needed sharpening...But turns out SOG has it all covered on this one, only thing I might mod is the spring on the scissors, just like GLBM did on his PowerPint.
I actually like this little tool 😁.
How are the scissors on it?
I got the powerpint a year or two ago and really was not impressed. All the tools had some burrs on the edges that made it hard to get a tool out, and the scissors had some burr that made them catch while cutting, but I never could find out where to file it down. I ended up losing it when camping and didn't feel too bad, went back to a leatherman juice.
Maybe they raised the quality control? Anyone else have a good experience? Might have to try again at some point.
-
I was thinking about getting one of these when they came out because I thought that the bid driver in the back of the plier head was a genius design. But then before I bought one, I saw 4 or 5 video reviews on youtube that all said that the bit driver barely worked. They all seemed to have issues with the bits spinning.
I just read through all the pages on here and it doesn't seem like anyone was talking about that. Do any of you that have the Power Pint, or any of the other similar SOG tools with that function, feel that the bit driver works well?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login