Showcase: Mods to plier-based multitools
-
Hi,
Tool Name: Leatherman Style PS+
Basis: Leatherman Style PS
Aim: Rendering it more versatile
Mods: Removed nail file/screwdriver. Added blade and metal file.
I've lost screwdriver but i'm carrying a bits holder on my keychain. It's way better than Style screwdriver solution.
Links: /topic/81632
Hope you like it. -
That is a really sweet mod!
I have done so many recent mods to plier based tools I'll just link to my Pinterest page:
And here is the instagram:
Bonus picture which is also located in both:

-
Nice work HG

-
Poncho65 edit: Post a bit to political for MTO

-
We don't do politcal here and apprecaite to keep opinions of that nature to yourself on here

-
Could that Leatherman saw holder be modded into a CenterDrive, do you think?
Charles.
-
Speaking of modded Center Drives, here's mine. I replaced the serrated blade and awl with a u-shank holder from an MP600 Pro Scout. I also cut down one of the longer saw blades so that it fits in the CD. (they cut easily with a dremel and a cutoff wheel). I drilled and tapped holes and installed a titanium clip made for a Zero Tolerance knife. Finally, I made a custom lanyard using an old RCA connector I had lying around. I'm into hifi audio and I thought this was cool. It's attached with a quick-release so I can remove it when I use the CD as a screwdriver. (not really necessary, but if I'm screwing a lot then I'll remove it)
Charles.

-
@ChopperCharles said:
Could that Leatherman saw holder be modded into a CenterDrive, do you think?Charles.
It could however just off the top of my head:
the LM pivot is larger
to clear the lock mech the surrounds might require thinning or it will push upwards which leads to...
likely need to arrange tools in the opposite handle for clearance
and lastly even with the holder fitted adding a saw or file etc will probably make it too long to store in the handle -
@zoidberg said:
It could however just off the top of my head:the LM pivot is larger
to clear the lock mech the surrounds might require thinning or it will push upwards which leads to...
likely need to arrange tools in the opposite handle for clearance
and lastly even with the holder fitted adding a saw or file etc will probably make it too long to store in the handleYou misunderstand. I would replace the locking blade with the saw and make it a bladeless multi tool. The remgrit holder would go back in my pro scout.
Perhaps even a sawzall blade would fit that large pivot instead of the t shank.
Charles.
-
@ChopperCharles said:
You misunderstand. I would replace the locking blade with the saw and make it a bladeless multi tool. The remgrit holder would go back in my pro scout.Perhaps even a sawzall blade would fit that large pivot instead of the t shank.
Charles.
I did, sorry. I'm an idiot. Okay, let me try again:
liner lock angle will need changing over
the length might still be an issue -
Well I’m pretty happy with my CD at the moment. I do use the knife far more than I ever did with my MP600, so maybe I’ll keep it as it is for a while.
What did you get the blade holder out of, in case I change my mind?
Charles.
-
@ChopperCharles said:
Well I’m pretty happy with my CD at the moment. I do use the knife far more than I ever did with my MP600, so maybe I’ll keep it as it is for a while.What did you get the blade holder out of, in case I change my mind?
Charles.
I was talking about the surge blade exchanger, same as in HG's post.
-
@Happy Gilmore said:
That is a really sweet mod!I have done so many recent mods to plier based tools I'll just link to my Pinterest page:
And here is the instagram:
Bonus picture which is also located in both:

Very nice HG :like:
-
Tool Name: Monster MUT
Basis: Leatherman MUT
Aim: To turn the MUT into a tool that is very handy and applicable for a "gun less" user
Mods: ALL tools changed out.
- Cleaver style blade,
- Custom modified Victorinox outrider scissors,
- Surge T shank attachment,
- Utility blade holder.
- Custom made pry bar,
- Victorinox Tweezers
- ratchet attachment
8.Frame cut and modified to accomodate all the mods listed.
My imgur album as all the close up shots of the Monster MUT
Links: https://imgur.com/a/iRDgOa4Detailed write up in this thread - /topic/83078
The Monster MUT



-
Excellent work x-iled

-
& thanks for sharing! -
Not my own picture but wanted to share it with you guys. I know the wave/charge platform is appreciated here but most of the time people miss an awl. The Dutch police gave the Leatherman seen in the picture. A wave plus with guthook serrated knife and a awl.

Sent from my ONEPLUS A3003 using Tapatalk
-
Was actually admiring that MUT today , x-iled

and that is cool that the Wave + for the Dutch police has all of that built in 8)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login