Showcase: Mods to plier-based multitools
-
@zoidberg said:
It could however just off the top of my head:the LM pivot is larger
to clear the lock mech the surrounds might require thinning or it will push upwards which leads to...
likely need to arrange tools in the opposite handle for clearance
and lastly even with the holder fitted adding a saw or file etc will probably make it too long to store in the handleYou misunderstand. I would replace the locking blade with the saw and make it a bladeless multi tool. The remgrit holder would go back in my pro scout.
Perhaps even a sawzall blade would fit that large pivot instead of the t shank.
Charles.
-
@ChopperCharles said:
You misunderstand. I would replace the locking blade with the saw and make it a bladeless multi tool. The remgrit holder would go back in my pro scout.Perhaps even a sawzall blade would fit that large pivot instead of the t shank.
Charles.
I did, sorry. I'm an idiot. Okay, let me try again:
liner lock angle will need changing over
the length might still be an issue -
Well I’m pretty happy with my CD at the moment. I do use the knife far more than I ever did with my MP600, so maybe I’ll keep it as it is for a while.
What did you get the blade holder out of, in case I change my mind?
Charles.
-
@ChopperCharles said:
Well I’m pretty happy with my CD at the moment. I do use the knife far more than I ever did with my MP600, so maybe I’ll keep it as it is for a while.What did you get the blade holder out of, in case I change my mind?
Charles.
I was talking about the surge blade exchanger, same as in HG's post.
-
@Happy Gilmore said:
That is a really sweet mod!I have done so many recent mods to plier based tools I'll just link to my Pinterest page:
And here is the instagram:
Bonus picture which is also located in both:

Very nice HG :like:
-
Tool Name: Monster MUT
Basis: Leatherman MUT
Aim: To turn the MUT into a tool that is very handy and applicable for a "gun less" user
Mods: ALL tools changed out.
- Cleaver style blade,
- Custom modified Victorinox outrider scissors,
- Surge T shank attachment,
- Utility blade holder.
- Custom made pry bar,
- Victorinox Tweezers
- ratchet attachment
8.Frame cut and modified to accomodate all the mods listed.
My imgur album as all the close up shots of the Monster MUT
Links: https://imgur.com/a/iRDgOa4Detailed write up in this thread - /topic/83078
The Monster MUT



-
Excellent work x-iled

-
& thanks for sharing! -
Not my own picture but wanted to share it with you guys. I know the wave/charge platform is appreciated here but most of the time people miss an awl. The Dutch police gave the Leatherman seen in the picture. A wave plus with guthook serrated knife and a awl.

Sent from my ONEPLUS A3003 using Tapatalk
-
Was actually admiring that MUT today , x-iled

and that is cool that the Wave + for the Dutch police has all of that built in 8)

-
Recently (yesterday) got a MP600 Pro Scout in Camo, ... but I didn't like Camo, nor the partially serrated blade!
so here is a chimera between a standard black MP600 (with wire cutters) and this MP600 Pro Scout :
it features
-
the tool load out of the MP600 Pro Scout -but mostly taken from the black MP600 for the identical ones-, including scissors and U-Shank blade holder
-
and the wire cutters of the MP600 -actually that's the body and head of the black MP600-
and obvioulsy, to have both scissors and blade holder, I needed to give up the larger flat screwdriver (and secondary blade that I didn't need, as I always have a SAK or knife of some kind in my pocket)

-
-
Here is my modified suspension NXT.
I replaced the awl with the saw from a suspension. I also ground the inside of the handles for more clearance, and was able to add a fourth thin tool - the eyeglass driver, using thin washers from an MP600. Without grinding the inside of the handles you can still do the mod, you just can’t have ANY washers in there. I didn’t like that at all.
I removed the plastic bits before grinding, which was really easy. I also took the opportunity to bend and straighten the handle so it lines up correctly with the other side. Overall the tool is much better now. Better toolset, even without an awl. I often need an eyeglass driver. I occasionally need an awl too, but this one is kinda crappy to begin with, and I think the blade does near as good a job as the awl in making a hole.
While I was playing around I fit some suspension tools in a spare mp400 body, and ended up with two long tools in one handle. Normally impossible, but the eyeglass driver is thin enough to make it happen. And the long 2.5D suspension driver actually seems pretty “right” in the lighter duty MP400 tool. Using these two suspension tools definitely allows a larger tool load out. The other handle can have scissors or a suspension saw, then a load of flat drivers, for a nicely equipped bladeless tool.
Charles.



-
Tool Name: Style bladeless
Basis: Leatherman style CS
Aim: make it bladeless, add more useful (to me) functions
Mods: Replaced the knife blade by a Gerber Dime package opener and a glasses screwdriverNot a very involved mod, I just reprofiled a Gerber Dime package opener to make it work in the Style, and since the blade housing is quite deep I managed to stack a glasses screwdriver (from a cheap Squirt clone) next to it.
-
Very nice work Combo!

I used a bit of my retirement time to mod a quarter inch drive to my Skele...works like it should in a pinch.


-
Tool Name: Gerber Dice
Basis: Gerber Dime & Splice
Aim: give the Dime better scissors and improved tools
Mods: Replaced the plier head with the scissors from the Splice (it's a drop-in). Replaced the butter Phillips/file in the Dime by the marginally stronger one from the Splice, added the jeweller screwdriver from the Splice (both require a little reprofiling of the tools around the pivot). Added the Micra nail file (more reprofiling and requires a bushing, for which I used the Micra pivot). Kept the excellent package opener, shuffled tools around to make everything fit and added a few nail nicks. -
Tool Name: Juice EBTK (everything but the knife)
Basis: Leatherman Juice XE6
Aim: make a slimmer bladeless tool to complement a knife, or to carry in places where blades aren't allowed
Mods: just removed the two blade layers. I kept one side naked but I thought the other side looked mismatched with one full handle (with the corkscrew) and one skeletonized, so I put one aluminium scale and polished it to try and match the appearance of the stainless steel as well as possible (read: not so much). The main advantage is that the handles are now of equal thickness (Juice owners know what I'm talking about).
In the end I didn't use it much so I restored its full tool complement (but kept one naked side). -
Tool Name: it doesn't really have one yet, suggestions are welcome (no Tooly McToolface please).
Basis: Gerber Clutch and Gerber Mini-Suspension-S (same construction as the Shortcut with slightly more rounded scales).
Aim: my take on the pliers+scissors combo tried elsewhere.
Mods: The two tools are held by M3.5 screws instead of pivots. The countersunk screw heads facing each other in the middle have been cut in place, hence the rough look (but the tool closes fine). -
Some beautiful mods, sometimes on rarely seen tools

Thanks for sharing
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login