Experiences with WORKPRO tools
-
@ReamerPunch said:

I've been going back and forth regarding the big tool.
I am sure that, if I order it, it'll arrive, and be a really bad example.You know you need one. If only just for your collection.
:D@MMR said:
That's what I feared with Tactix tools too.......so far I have only had one bad tool from Tactix though, the rest of them have actually been surprisingly "Okay" for the 1/2 or 1/4 of the price they cost compared to their equivalent from Stanley, Draper etc.I did a comparison of Tactix "vise-grips with a pair of genuine Irwin Vise-grips, and big surprise the Irwin ones were better made, but they were also twice as expensive, and I do want to say that in the time I have had the vice grips from Tactix, I have not had any issues with them.
the only bad tool I had from Taxtix was a dual blade knife (utility and regular knife), the thing fell apart the first time I used it, the main reason for that was that it was held together with tiny screws, which after just getting a slight bump and being pressed hard on literally either snapped in half or pulled themselves out including the threading. Hard to explain, I wish I had pictures of it, but overall it was just a bad tool in general, regular knife was too thin as well and it was both poorly made and badly designed.
But other than that, I have had all my other tools from Tactix for a few years now and they have seen quite some heavy usage a few times, but none let me down at any time, so I can't complain about them.
I can Imagine WORKPRO will be a very similar experience
Here's the comparison I made with the Vice-Grips:
/topic/78691That was a great write-up. Thank you, MMR.

The HD WorkPro is a bit higher up on the quality chart than most cost-conscious large MTs. Aside from the lack-luster pliers, I think it is outstanding for the price point. :)@Sam Lim said:
My pliers "stutters" when opening and closing.. That annoys me alot.. Regarding the file, not sure if u can see in the pictures.. The cut is in a different direction from all my other single cut side. Its just not natural for a right handed. It will simply just glide along the material that u are trying to file.Thinking of this... I wonder how those left handers manage on a regular "correct" cut file..

I just swap hands for direction oriented tasks.
:D
Kidding aside, I think that is fine if someone plans on using one for EDC. I know I would quickly adapt to using a different cut-direction after a day or two. I have tons of 'real' files at home and at work. Some are cut at an opposite arrangement. You can always push, instead of pull; or pull, instead of push for filing tasks. But, it wouldn't take long to acclimate to the cut-variance. IMO of course (no pun intended. :P ). -
The large work pro looks massive. Certainly falls into the heavy and heavy duty category. You know, one of the criteria I always look for in a multitool is whether or not you can drop it into a sock and beat someone to death with it, because, you never know when that might come in handy.

-
@Alan K. said:
The large work pro looks massive. Certainly falls into the heavy and heavy duty category. You know, one of the criteria I always look for in a multitool is whether or not you can drop it into a sock and beat someone to death with it, because, you never know when that might come in handy.


It is the heaviest MT I have ever held. The closest MT, in weight, is the Gerber Freehand(by two or three tenths of an ounce). The WorkPro HD and the Freehand are both impractical, unless of course you need to drop it in a sock and beat some would-be assailant to death, then they are top-notch.
:D -
@Alan K. said:
The large work pro looks massive. Certainly falls into the heavy and heavy duty category. You know, one of the criteria I always look for in a multitool is whether or not you can drop it into a sock and beat someone to death with it, because, you never know when that might come in handy.


It is the heaviest MT I have ever held. The closest MT, in weight, is the Gerber Freehand(by two or three tenths of an ounce). The WorkPro HD and the Freehand are both impractical, unless of course you need to drop it in a sock and beat some would-be assailant to death, then they are top-notch.
:DLol! There was a rerun of the casino royale on TV yesterday.. This somehow reminded me of a scene where Mr Bond was tied up in a chair...
-
Sam,
That image of bond being beaten with an HD WorkPro is stuck in my head now.
James Bond doesn't stand a chance with the WorkPro in a sock. He would be better off fighting against a death-laser.
:D -
The HD WorkPro alongside the Gerber Freehand.




-
Now.. That freehand doesn't look so big now..
Btw, the freehand or the flik when the implements are opened up, to me they always resembles a cute little cuttlefish..
-
:o I see it now.

-
Got this one on the way. Looking forward to trying this one out. Should arrive Tuesday. :)
-
@gerleatherberman said:
Got this one on the way. Looking forward to trying this one out. Should arrive Tuesday. :):ahhh I have ordered one and I blame u Gman! :twak:
On a side note, this is a 4in tool. It's should be very interesting. I dun like of that scissors though.. Looks and should work/not work like the ones on Sogs...
-
I own a few of the scissors tool other guys have posted, with the Craftsman branding. Bought one new (and cheap) out of curiosity, got a couple more in a a used tool lot I bought just to get a specific tool I was hunting. The scissors are good enough to make a decent set of folding scissors for EDC, fishing, etc. Though, as RP first mentioned, the other implements are decidedly below average. Seems like it might be a good move to remove those and save the weight.
-
@gerleatherberman said:
Got this one on the way. Looking forward to trying this one out. Should arrive Tuesday. :)That might be the best of both worlds, the design of their Heavy Duty tool, with most of its tools, but 4" long, and with scissors. As long as the scissors are decent. But in any case it's nice to see the HD tool platform scaled down to 4" at least.
I look forward to your thoughts!
-
@ReamerPunch said:
That might be the best of both worlds, the design of their Heavy Duty tool, with most of its tools, but 4" long, and with scissors. As long as the scissors are decent. But in any case it's nice to see the HD tool platform scaled down to 4" at least.
I look forward to your thoughts!
Totally agree! I cancelled my order from amazon but ordered from another source.. So mine is going to take a while. Rarely do a good C&C tool come in a 4in package. Usually they are blocky and unwieldy.. Looking forward to your review.

-
Sorry guys. As is came from the factory, it is closer to the junk end of the scale than to the cheerful end.
Scissors are pure smurf crap(barely cut paper), fit and finish are about 50% of the heavy duty 4.5" version. Pliers have so much play that I have trouble cutting 18g stranded wire with them. The saw has 4mm or so of uncut length for teeth and the two rows of teeth are not even. Phillips driver is among the worst I've seen.
I will take pics later to better show what I received.The scissor design is O.K. I must say, but the QC of them is terrible on my example. Like a set of PowerPint scissors, but that have poor cutting geometry and pivot tolerances.
-
@gerleatherberman said:
Sorry guys. As is came from the factory, it is closer to the junk end of the scale than to the cheerful end.Scissors are pure smurf crap(barely cut paper), fit and finish are about 50% of the heavy duty 4.5" version. Pliers have so much play that I have trouble cutting 18g stranded wire with them. The saw has 4mm or so of uncut length for teeth and the two rows of teeth are not even. Phillips driver is among the worst I've seen.
I will take pics later to better show what I received.The scissor design is O.K. I must say, but the QC of them is terrible on my example. Like a set of PowerPint scissors, but that have poor cutting geometry and pivot tolerances.
Oh my goodnesssssss..... Thats a nightmare to hear.. I rarely hear you make such bad feedbacks.... It must be really really terrible.. I should had gone with amazon.....

-
Plus side? Pliers are spring loaded and open wider than the HD version. Another bad side is the 4" tool is 10.5oz. That is not a joke, it is a 4" tool over 10oz.

-
Here we go. Hopefully the pictures can convey the serious step down of quality from the HD WorkPro.
See the weight. 10.582oz..


Top is HD WorkPro.
Bottom is 4" WorkPro.
Note the finish quality is a step down.

Phillips. Note the deformed tip.

Flat blade and bottle opener. Note the better angles on the HD.

LG flat drivers. Pretty much the same.

Awls. Both decent.

Can Opener. Stripper was removed from the implement.

Saws. Note the poorly finished teeth on the 4".

Files. The HD has 3-sides and the 4" had two sides. Both are cut well enough. The 4" file is a bit more aggressive, but not cut as cleanly.

Plain edge blade. Pretty much the same, but sized differently for each tool. The 4" isn't polished like the HD, but has a stone'wash-like finish. Both are sharp enough.
*Note HD has a serrated blade, but the 4" version replaces that with scissors.

Pliers. The HD pliers are not sprung, but the 4" pliers are. The spring could move mountains it is so strong. Some like it and some don't. The 4" model pliers open wider than the HD pliers.



Scissors. I pictured them with the old style WorkPro 4" tool scissors since the HD doesn't have scissors.

Scissors showing grind and spring. Note the bad geometry. Spring setup is acceptable.

-

What a shame.
The HD really shines in comparison.Do you think Workpro's quality has dropped altogether? Will the new HD ones be total junk?

-
@ReamerPunch said:

What a shame.
The HD really shines in comparison.Do you think Workpro's quality has dropped altogether? Will the new HD ones be total junk?

I would hope not, but if their new 4" model is any indicator, the quality is likely to be inferior to that of the OG HD.

Will hope that isn't the case, and I keep hoping I got a dud, but as many QC oversights that are visible, the outlook isn't great. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
