New Style Magnifying Lens Issue
-
How do I tell if my Explorer has the glass or plastic lens?
Mine was definitely sold new in 2017, as it has a company logo showing 50 years... 1967-2017.
No, mine hasn’t fallen out and I haven’t tried to remove it. Just wondering how to tell what magnifying lens is in mine?
Thanks!




Sent from my iPhone using Tapatalk
-
Could this be a repair case by VICTORINOX : <a href="/topic/82091 SAK that is not in the Victorinox catalogs</a>

-
Edit:

The magnification level is one way to determine the lens material. Another way is to tap it with a piece of glass like a marble. The glass will have a faint "tink" sound, while the plastic will have a faint "thud" sound. :ahhh
-
@zrxoa1 said:
How do I tell if my Explorer has the glass or plastic lens?Look at the attached Victorinox documents. There are some differences in the shape of the holder, the spring and the associated Phillips screwdriver.
-
@MiniChamp said:
Look at the attached Victorinox documents. There are some differences in the shape of the holder, the spring and the associated Phillips screwdriver.Very interesting PDF's my friend, thanks for sharing them
.When comparing my "third generation lens" SilverTech Swisschamps with my "second generation lens" ones I always thought the spring action felt different. When you close the lens on the "second gen lens" Swisschamps you only notice the spring closing it at the very end, while on the new ones the spring takes over a lot earlier during the closing of the lens (hope this makes sense).
All three of my new lens SilverTech Swisschamps feel this way, while both of my "second generation lens" Swisschamps, and my Explorer with the same lens have the "weak" spring action.
I can only speak about the examples I own, which are three of the new ones, and three of the "second generation" ones (and one or two old grey ones, but those don't really matter here).
-
@Top-Gear-24 said:
Very interesting PDF's my friend, thanks for sharing them
.
-
The 3 lenses that I have had fall out of SwissChamps were all the glass ones in the 3rd generation version.
-
The frame integrity seems to be acceptable for the application. But, the tolerances look to be the culprit in the popped out lenses. As many stated, a bit of epoxy or cyanoacrylate glue is a great solution. Seems Vic could start doing this at the factory. I ended up using 3 dots of cyanoacrylate(preference thing), though two is sufficient from what has been written so far.
I agree it would probably take considerable force to break the housing, which I suspect is made of polycarbonate.
CA (superglue) is definitely the easier way to keep the lens put than epoxy, and might be strong enough. Did it cloud the housing?
-
@zrxoa1 said:
How do I tell if my Explorer has the glass or plastic lens?Mine was definitely sold new in 2017, as it has a company logo showing 50 years... 1967-2017.
No, mine hasn’t fallen out and I haven’t tried to remove it. Just wondering how to tell what magnifying lens is in mine?
Thanks!




Sent from my iPhone using Tapatalk
To add to G-man's and MiniCamp's tips, there's also a ribbed effect on the inside of the housing, barely noticeable. I bought my Explorer knowing it had the glass lens because I was able to see this ribbing in the seller's pictures.
I'm looking at it right now... and wouldn't you fugging know it, the freaking lens fell out again!!!
I must have contaminated the edges with my fingertips when I glued them, I don't know. :ahhh -
With these opaque/ clear housings, the thing to remember is not how much force is needed to break them. Only how little force is needed to deform them enough to allow the lense to pop out.
This is just NOT a robust design. That's all there is to it.
We dont buy our Swiss Army Knives so that they work most of the time. We expect them to work. Whether or not they are up to a given task or not is a matter of reasoning it out, but if there were virtually no known instances of lenses spontaneously popping out of grey housings, and there are at least a few popping out of the newer housings, then that's just not acceptable.
Only things I can think of are
-of course, cost to produce
And
-maybe something in the grey housing is of a material that is no longer available or legal to produceAnd of course, the cost of a new Explorer vs the cost of mailing and repair makes us decide we are better off applying our own home-grown fix. And that sucks if you have to do that to a brand new knife. Especially a Vic. Unheard of. Until now
-
...the shape of their MAC, no doubt.
-
@Sawl Goodman said:
Well, as above, 5 minute epoxy did the job for me. The best glue for bonding two different rigid materials together, permanently. With a paperclip, I applied two tiny drops opposite each other on the inside edge of the housing, before reseating the lens.A single drop might be enough. I wanted to take no chances.
@gerleatherberman said:
The frame integrity seems to be acceptable for the application. But, the tolerances look to be the culprit in the popped out lenses. As many stated, a bit of epoxy or cyanoacrylate glue is a great solution. Seems Vic could start doing this at the factory. I ended up using 3 dots of cyanoacrylate(preference thing), though two is sufficient from what has been written so far.Well this is excellent news. If my SwissChamp or Explorer do ever develop a problem, it sounds like the fix is quite simple.
-
@MiniChamp said:
Look at the attached Victorinox documents. There are some differences in the shape of the holder, the spring and the associated Phillips screwdriver.So if I am looking at the .pdf correctly, mine is glass?

Sent from my iPhone using Tapatalk
-
@Buzzbait said:
Well this is excellent news. If my SwissChamp or Explorer do ever develop a problem, it sounds like the fix is quite simple.Well, my lens came out again as I cleaned it. Could be as a result of poor epoxy technique, or that it was it was 5 minute type, I don't know. The good news is that since I've reseated it, it's stayed in place much better than before - not simply falling out on opening. Being careful now!
-
Here are some close-up photos of the magnifier. This is from an Explorer that I purchased online this year (2019), so I assume it is the most recent incarnation of the magnifier.
If you look closely at the inside circumference of the frame of the magnifier, you can see alternating notches and tabs. On the opposite side of the magnifier frame, the notches are across from the tabs, and vice-versa.
The magnifier lens rotates within the frame, between the tabs on each side, when I hold the lens between my fingers and turn it gently.
I have two Explorers that are this type, and have had no issues with the lenses coming out.
Hope the photos are of some help in visualizing this vintage of magnifier.




-
@zrxoa1 said:
So if I am looking at the .pdf correctly, mine is glass?
It looks to me like the glass one (although, it's a little hard to be sure since the most important area for making this determination is a bit out of focus in your image).
I attach an image of an Explorer with a plastic mag-glass for comparison.

-
@MiniChamp said:
It looks to me like the glass one (although, it's a little hard to be sure since the most important area for making this determination is a bit out of focus in your image).I attach an image of an Explorer with a plastic mag-glass for comparison.
Everything I’ve seen, I’m sure I have the newest glass mag set up.
Thank you!
Sent from my iPhone using Tapatalk
-
The easiest way for me to tell a plastic lens from a newer type glass lens is to look at the housing’s tang when the magnifier is in the open position. The new glass magnifier has a very flat tang, where it enters the blade well. The older plastic magnifier has a highly rounded tang.
Glass:

Plastic:

Here’s a close-up.
Glass:

Plastic:

-

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
