Leatherman Free P2/P4 Club and Feedback Thread
-
That happens sometimes to other LM models too.
It can go away after some time of use, however, I've read reports where it didn't seem to.It can be that the pivot is slightly oval in shape (inside) which could introduce such behavior

-
@MTMatt said:
That happens sometimes to other LM models too.
It can go away after some time of use, however, I've read reports where it didn't seem to.It can be that the pivot is slightly oval in shape (inside) which could introduce such behavior

Sounds like warranty worthy, but maybe not possible after the mods? Yes, that had been an issue across the board with pliers.
-
@Raoul Octav said:
After another week of use, today i observed an issue.
I have used the pliers and i have applied a small amount of force on the handles to hold something fermly( i had to unscrew an M10 bolt and i hold the nut with the pliers).
Interestingly, the pliers have become stiff, immediately i felt them to be too stiff to my likening and to what i have been used.
I applied some oil and opened and closed the pliers several times. This is affecting the easyness of closing the tool.
When it became slightly easy for the pliers to be opened, after several hundreds closing and opening, i squeezed the handles again, nothing in the jaws of the pliers, and again it became stiff.
WTF, something is not OK in the area of the Pliers PIVOTThis helped me immensely.
/post/1952289
-
I just tried the awl on my leather belt. I was a bit skeptical but it surprisingly punched right through it.
-
@genevabuck said:
I just tried the awl on my leather belt. I was a bit skeptical but it surprisingly punched right through it.
I also have had good luck drilling mid-size holes in wood to start screws. :)Just can't start really small holes like can be done with a pointed awl.
-
So, got my P2 and P4, sold my Charge TTi and Signal... Loving them mostly, apart from the difficulty opening blades and the way too fat pocket clip.
But very curious to see different parts being used for the scissors. The P4 scissors don't provide any resistance when opening for the first thirty degrees or so. The P2 ones snap back. You can see they changed the profile, and you can see this in action as you deploy the tool. The P4 scissors won't move the lock for some time.
The P4 is marked 04/19 and came with the new pocket clip. The P2 doesn't have a date stamp, both bought Amazon/Netrush in USA June 6.

-
Strange. On my P4 (no date stamp) the scissors are those in your P2 pic side. Seems they have modified the scissors on newer runs. Hang on to that P2, it might become rare :D

-
@Dutch_Tooler said:
Strange. On my P4 (no date stamp) the scissors are those in your P2 pic side. Seems they have modified the scissors on newer runs. Hang on to that P2, it might become rare :DSame on my P4 (which does not have a date stamp, however, on the place where they put the date stamp on the "new" Free tools, mine says 1 2 1, only on the side of the phillips
). -
Decided to take care of the pant's pocket destroying screws on my P4.
The P4 clip LM sent came with an extra set of screws, so I used those just in case I sent a screw flying across a messy workshop.
I filed the slot out a little in the end of a clockmaker's pin vise to hold the machine screws while grinding and polishing. There really isn't another good way to hold these screws(they are so short) without damaging the threads, so be careful using anything to hold the screws. The soft steel of the pin vise and dispersion of surface contact(from filing the opening to seat the screw a bit better) did not damage the threads any.Before.

Pin vise with hole notched out.

Screw secured in pin vise.

After spinning it against a fine grinding wheel.

Screws installed after some steel polishing to smooth the screw heads out.

-
GLBM, that looks good.
JonesE
-
Good job glbm, let us know if this works better for your pants

-
@SirVicaLot said:
Good job glbm, let us know if this works better for your pants
Thank you and will do, SirVic!

-
So I gave up trying to save the pockets of my pants. I have carried ZT, Benchmade, Spyderco, etc for years and have had issues with the deep carry clips wearing the pockets of my pants for just as long. One of the best is the deep carry wire clip that Spyderco uses. The rest have the protruding screw heads that cause the wear.
JonesE
-
This guy makes 4mm bit drivers for the free
Sent from my iPhone using Tapatalk
-
One question as I’m about to be a P4 Owner too,
Whats the best way to carry this tool?? , In the Nylon Sheath that comes whit the Tool or in the „Rulerpocket“ ??
I can’t carry it like my Signal: horizontal clipped in the Beltloop whyle the Carabiner is also clipped in the near beltloop because it’s dosnt have a carabiner..Is the Blade automatically locked??
Of is the Clip thought enough to clip the Tool on the Belt??
Gesendet von iPhone mit Tapatalk Pro
-
@matzesu said:
One question as I’m about to be a P4 Owner too,
Whats the best way to carry this tool?? , In the Nylon Sheath that comes whit the Tool or in the „Rulerpocket“ ??
I can’t carry it like my Signal: horizontal clipped in the Beltloop whyle the Carabiner is also clipped in the near beltloop because it’s dosnt have a carabiner..Is the Blade automatically locked??
Of is the Clip thought enough to clip the Tool on the Belt??
How you carry it is up to you and how you use your tool. But I do invite you to check out my custom fit holster design, it comes in a few different belt clips styles.
https://www.youtube.com/watch?v=06HWSQMVE9AThe blade is automatically locked when open. When close the blade is held in using tension from a spring acting on a cam. Your thumb overcomes the spring tension when deploying the blade.
The included clip is quite large, and would work on a belt, but the tool could easily twist sideways as the clip isn't very wide.
-
@bigraab1972 said:
https://youtu.be/RrU_kSBGWFcThis guy makes 4mm bit drivers for the free
Sent from my iPhone using Tapatalk
After adding the processing charges+shipping+tax, it comes up to almost $40 ::)..But I guess if you really need a 4mm driver and willing to spend the extra money and provide your own bits, it will be a good deal

-
Leatherman Germany was pretty fast, yesterday ordered, today surprisingly on my Desk..
I think I put in on my Belt, ..
Makes a pretty good impression so far, I have to practice a bit whit this one hand mechanism,
The Pliers are pretty easy to open whit one hand, but I can’t close it whit one hand.. pix will follow..Gesendet von iPhone mit Tapatalk Pro






Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
