Gerber Mr. Pinchy Multi Plier Club
-
Thanks GLBM... Haven’t yet gone through the pinchy evolution... didn’t know this was a version 2

-
@jaya_man said:
Thanks GLBM... Haven’t yet gone through the pinchy evolution... didn’t know this was a version 2

The large pliers pivot bushing bolt was only on the first(which are identifiable by the silly scissors and polished finish) and second(which are identifiable by the pliers bushing, satin finish and awl instead of scissors) versions. :)
The later versions, up until 5(which had rivets instead of screws mounting the pliers and had a pressed pivot pliers pivot) had a smaller bolt pivot in the pliers and has a file instead of the awl. :ahhh -
Hello everyone.This is my first post in this forum.
I will respect your active discussions and wonderful collection.
I am not good at English. So when I write something strange or rude, I don’t mean that. Please don’t get angry just laugh out.I also love Mr. Pinchy very much. I have been collecting these charming tools in Japan.
Now, I will show you summary of my collection.NOTICE
@ This table only depends on my own Mr. Pinchies. It doesn’t take into account any forum members collection. Of course it doesn’t include all of products in the world.
@ I lined up the materials according to my arbitrary judgment. I’m not sure it is correct order.
@ I chose these tool part name selfishly. Please tell me the proper name.
@ Any errors and omissions are my fault.In making this table, I received many suggestions from this forum.
Thank you very much.
I hope this helps you and this forum.



-
3 more jpegs



-
@hiraboo said:
Hello everyone.This is my first post in this forum.
I will respect your active discussions and wonderful collection.
I am not good at English. So when I write something strange or rude, I don’t mean that. Please don’t get angry just laugh out.I also love Mr. Pinchy very much. I have been collecting these charming tools in Japan.
Now, I will show you summary of my collection.NOTICE
@ This table only depends on my own Mr. Pinchies. It doesn’t take into account any forum members collection. Of course it doesn’t include all of products in the world.
@ I lined up the materials according to my arbitrary judgment. I’m not sure it is correct order.
@ I chose these tool part name selfishly. Please tell me the proper name.
@ Any errors and omissions are my fault.In making this table, I received many suggestions from this forum.
Thank you very much.
I hope this helps you and this forum.Wooooaaaa! :o
Fantastic work in Pincheology, hiraboo!
Thank you so much for putting that all together, and sharing your knowledge, and collection! You're English reads well! :)
Welcome to MT.o, hiraboo!

Mr. Pinchy is an all-time favorite of mine. I am looking forward to looking at my Pinchy assortment this evening and noting the evolution of Mr. Pinchy with your charts and info!
Thank you again, and great first post!

-
@gerleatherberman said:
Wooooaaaa! :o
Fantastic work in Pincheology, hiraboo!
Thank you so much for putting that all together, and sharing your knowledge, and collection! You're English reads well! :)
Welcome to MT.o, hiraboo!

Mr. Pinchy is an all-time favorite of mine. I am looking forward to looking at my Pinchy assortment this evening and noting the evolution of Mr. Pinchy with your charts and info!
Thank you again, and great first post!

What he said ^

-
Thank you for your friendly and kindly response ;)
I'm very happy these data may help you.If you tell me more information about your lovely Pinchies, I will be grad to add that in this charts and remake

-
If you're interested, here's a break-down of Mr Pinchies I did back in 2014:
/post/928733
-
@gregozedobe said:
If you're interested, here's a break-down of Mr Pinchies I did back in 2014:/post/928733
Oh, yes I read that. I found your post on Google. I have read that many times using English/Japanese dictionary.
I was tremendously influenced by that, and made up my mind to break-out Mr.Pincy.
So almost every idea and method I have adopted is in your(or Bob's) post.I just applied archievements of this forum! -
Not sure if these will help any, but here are the Pinchy tools I have currently.
V1.0 -FPR, V1.1 -BO, V1.2, V.2.0 -BO, and V.2.0.


V.3/V.4 Factory Hybrid(still retains awl and has V3 pliers with V4.0 pat. stamp), Fiskars Branded version(with awl and file), V4.1, V4.1 -BO, and V4.1(with large pliers pivot).


V5 BN and V5 NN.


I am still not sure why the V.3 is just a variant of the V.2. Why does a pliers pivot change garner a complete version designation?

IMO, the designations should stop at 4. V.1.X being the ones with the old style "Gerber" on the tool side of the handles, V2.X being the ones with the old style "Gerber" on the pliers side of the handles, V.3.X being the ones with the standard style "Gerber" on the tool side of the handles and updated nut/bolt tool-end contruction, and finally the V.4 being the ones with riveted pliers mounts.
Just a suggestion, as the current'y utilized designations are overly complex and needs revision in my opinion.EDIT:
Proposal of Version designations be simplified to these, with variations applied to ".X". This is not my original designation idea, but was a system I remember from another thread.

-
Beautiful great collection gerleatherman! And you are very good at taking photos!!
I think I can put your tools in photos like that.

-
@hiraboo said:
Beautiful great collection gerleatherman! And you are very good at taking photos!!I think I can put your tools in photos like that.
親切な言葉をありがとう、そしてそれらをチャート内に配置してくれてありがとう、hiraboo!

@GLBM English said:
Thank you for the kind words, and thank you for placing them within the chart, hiraboo!
-
Amazing :o
I didn't know that Japanese characters could be displayed.
Translation into Japanese is perfect
Thank you, gerleatherberman!
( May I call you GLBM like others do? )I agree with GLBM’s opinion about Version designnations.
I’ll provide reference materials about plier jaws.
These are some pictures when I cleaned up my Pinchys.Now I’m revisioning my chart with new data

Please wait a little longer.
-
@hiraboo said:
Amazing :o
I didn't know that Japanese characters could be displayed.
Translation into Japanese is perfect
Thank you, gerleatherberman!
( May I call you GLBM like others do? )I agree with GLBM’s opinion about Version designnations.
I’ll provide reference materials about plier jaws.
These are some pictures when I cleaned up my Pinchys.Now I’m revisioning my chart with new data

Please wait a little longer.Most definitely, sir!

Do you have a preference to be addressed as, or is hiraboo fine? :)
Looking forward to seeing more of your work!

The Pinchy identification system you've created is excellent so far!

-
@gerleatherberman said:
Most definitely, sir!
Do you have a preference to be addressed as, or is hiraboo fine? :)
Looking forward to seeing more of your work!

The Pinchy identification system you've created is excellent so far!

Thank you for looking forward to it, GLBM

Please call me as you like. (except “Sweetheart” :D)Well, A revised version chart is available.
CHANGES
Positioned new items ( red sample No. ) include collection of GLBM. Thank you very much.
Fixed some component names according to the manual.
e.g. plier head → pliers, awl → utility bladeI know you feel something uncomfortable around the V2 section

Please consider this work incomplete.
I want to research more data and revise this chart over time

-
ありがとう、ヒラブー!

チャートはよく見えます。ガーバーがマルチプライヤーで何回反復したかは驚くべきことです。 :o
彼らは間違いなく、新しいモデルで既存の部品を無駄にしないようにしました。 :)
Fiskarsブランドの例をチャートに組み込むことを検討しましたか?
それは間違いなくプロジェクトを複雑にしますが、Fiskarsブランドでマルチプライヤーを製造するという決定は常に私を魅了しました。@English said:
Thank you, Hilaboo!
The chart looks good. It's amazing how many times Gerber repeated it with a multiplier. :o
They definitely tried not to waste existing parts with the new models. :)
Have you considered incorporating Fiskars brand examples into your charts?
It definitely complicates the project, but the decision to manufacture multipliers under the Fiskars brand has always fascinated me. -
Thank you, GLBM!
Yes, my name is ヒラブー
They definitely tried not to waste existing parts with the new models. 
I think these words accurately represent the facts. And I see you respect GERBER and its employees. They will be proud to have such a great fan

I will do my best to realize your proposal about FISKARS brand example.
I’m sorry I don’t have FISKARS brand one. So please give me detailed information.I saw your previous post↓
/post/1887382
The tip angle of utility blade (awl) looks sharper than the others.
Is there anything difference ??? -
@hiraboo said:
Thank you, GLBM!
Yes, my name is ヒラブー
They definitely tried not to waste existing parts with the new models. 
I think these words accurately represent the facts. And I see you respect GERBER and its employees. They will be proud to have such a great fan

I will do my best to realize your proposal about FISKARS brand example.
I’m sorry I don’t have FISKARS brand one. So please give me detailed information.I saw your previous post↓
/post/1887382
The tip angle of utility blade (awl) looks sharper than the others.
Is there anything difference ???すみません、ひらぼう
このスレッドからのメール通知を見逃していました。 Fiskarsをすぐに入手し、バージョン2のマルチプライヤーの1つと共に詳細な写真を撮ります。
親切な言葉もありがとう!
@english said:
Sorry, hirabooI had missed the email notice from this thread. I will get the Fiskars out soon and take some more detailed photos alongside one of the version 2 multi pliers.
Thank you for the kind words as well!
-
@gerleatherberman said:
Sorry, hirabooI had missed the email notice from this thread. I will get the Fiskars out soon and take some more detailed photos alongside one of the version 2 multi pliers.
Thank you for the kind words as well!
No problem, GLBM

Please when you have time :)By the way,
I purchased the FIRST PRODUCTION RUN model with box, cloth sheath and instructions on ebay.
As I wrote above, to revise my charts, I read FPR instructions for the first time.
( We usually don’t read the instructions very often, do we? :D )Maybe someone pointed out this before, but I want to mention it again.
FPR have a scissors. But in the instructions, there is how to pull out UTILITY BLADE/ALTERNATE COMPONENT. :o
Moving on to the next chapter, there is the word “scissors/file”.
I had thought that they changed alternate component depending on demand, user request, or cost. Now I came up with the idea that they were thinking about producing three different models from beginning.
As if there are various models in MP600.Wait, in case of Mr. Pinchy, all models have a common serial number.
Regardless of the ALTERNATE COMPONENT, I think all silver models have #55800 and all black models have #55860. ???Hmm, I found a little mystery. :ahhh
But it’s fun to imagine all about Mr. Pinchy and the people who made it. ;)FIGURE
Above - instructions of FPR
Below - instructions of MP600

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
