Gerber Mr. Pinchy Multi Plier Club
-
@gerleatherberman said:
Wooooaaaa! :o
Fantastic work in Pincheology, hiraboo!
Thank you so much for putting that all together, and sharing your knowledge, and collection! You're English reads well! :)
Welcome to MT.o, hiraboo!

Mr. Pinchy is an all-time favorite of mine. I am looking forward to looking at my Pinchy assortment this evening and noting the evolution of Mr. Pinchy with your charts and info!
Thank you again, and great first post!

What he said ^

-
Thank you for your friendly and kindly response ;)
I'm very happy these data may help you.If you tell me more information about your lovely Pinchies, I will be grad to add that in this charts and remake

-
If you're interested, here's a break-down of Mr Pinchies I did back in 2014:
/post/928733
-
@gregozedobe said:
If you're interested, here's a break-down of Mr Pinchies I did back in 2014:/post/928733
Oh, yes I read that. I found your post on Google. I have read that many times using English/Japanese dictionary.
I was tremendously influenced by that, and made up my mind to break-out Mr.Pincy.
So almost every idea and method I have adopted is in your(or Bob's) post.I just applied archievements of this forum! -
Not sure if these will help any, but here are the Pinchy tools I have currently.
V1.0 -FPR, V1.1 -BO, V1.2, V.2.0 -BO, and V.2.0.


V.3/V.4 Factory Hybrid(still retains awl and has V3 pliers with V4.0 pat. stamp), Fiskars Branded version(with awl and file), V4.1, V4.1 -BO, and V4.1(with large pliers pivot).


V5 BN and V5 NN.


I am still not sure why the V.3 is just a variant of the V.2. Why does a pliers pivot change garner a complete version designation?

IMO, the designations should stop at 4. V.1.X being the ones with the old style "Gerber" on the tool side of the handles, V2.X being the ones with the old style "Gerber" on the pliers side of the handles, V.3.X being the ones with the standard style "Gerber" on the tool side of the handles and updated nut/bolt tool-end contruction, and finally the V.4 being the ones with riveted pliers mounts.
Just a suggestion, as the current'y utilized designations are overly complex and needs revision in my opinion.EDIT:
Proposal of Version designations be simplified to these, with variations applied to ".X". This is not my original designation idea, but was a system I remember from another thread.

-
Beautiful great collection gerleatherman! And you are very good at taking photos!!
I think I can put your tools in photos like that.

-
@hiraboo said:
Beautiful great collection gerleatherman! And you are very good at taking photos!!I think I can put your tools in photos like that.
親切な言葉をありがとう、そしてそれらをチャート内に配置してくれてありがとう、hiraboo!

@GLBM English said:
Thank you for the kind words, and thank you for placing them within the chart, hiraboo!
-
Amazing :o
I didn't know that Japanese characters could be displayed.
Translation into Japanese is perfect
Thank you, gerleatherberman!
( May I call you GLBM like others do? )I agree with GLBM’s opinion about Version designnations.
I’ll provide reference materials about plier jaws.
These are some pictures when I cleaned up my Pinchys.Now I’m revisioning my chart with new data

Please wait a little longer.
-
@hiraboo said:
Amazing :o
I didn't know that Japanese characters could be displayed.
Translation into Japanese is perfect
Thank you, gerleatherberman!
( May I call you GLBM like others do? )I agree with GLBM’s opinion about Version designnations.
I’ll provide reference materials about plier jaws.
These are some pictures when I cleaned up my Pinchys.Now I’m revisioning my chart with new data

Please wait a little longer.Most definitely, sir!

Do you have a preference to be addressed as, or is hiraboo fine? :)
Looking forward to seeing more of your work!

The Pinchy identification system you've created is excellent so far!

-
@gerleatherberman said:
Most definitely, sir!
Do you have a preference to be addressed as, or is hiraboo fine? :)
Looking forward to seeing more of your work!

The Pinchy identification system you've created is excellent so far!

Thank you for looking forward to it, GLBM

Please call me as you like. (except “Sweetheart” :D)Well, A revised version chart is available.
CHANGES
Positioned new items ( red sample No. ) include collection of GLBM. Thank you very much.
Fixed some component names according to the manual.
e.g. plier head → pliers, awl → utility bladeI know you feel something uncomfortable around the V2 section

Please consider this work incomplete.
I want to research more data and revise this chart over time

-
ありがとう、ヒラブー!

チャートはよく見えます。ガーバーがマルチプライヤーで何回反復したかは驚くべきことです。 :o
彼らは間違いなく、新しいモデルで既存の部品を無駄にしないようにしました。 :)
Fiskarsブランドの例をチャートに組み込むことを検討しましたか?
それは間違いなくプロジェクトを複雑にしますが、Fiskarsブランドでマルチプライヤーを製造するという決定は常に私を魅了しました。@English said:
Thank you, Hilaboo!
The chart looks good. It's amazing how many times Gerber repeated it with a multiplier. :o
They definitely tried not to waste existing parts with the new models. :)
Have you considered incorporating Fiskars brand examples into your charts?
It definitely complicates the project, but the decision to manufacture multipliers under the Fiskars brand has always fascinated me. -
Thank you, GLBM!
Yes, my name is ヒラブー
They definitely tried not to waste existing parts with the new models. 
I think these words accurately represent the facts. And I see you respect GERBER and its employees. They will be proud to have such a great fan

I will do my best to realize your proposal about FISKARS brand example.
I’m sorry I don’t have FISKARS brand one. So please give me detailed information.I saw your previous post↓
/post/1887382
The tip angle of utility blade (awl) looks sharper than the others.
Is there anything difference ??? -
@hiraboo said:
Thank you, GLBM!
Yes, my name is ヒラブー
They definitely tried not to waste existing parts with the new models. 
I think these words accurately represent the facts. And I see you respect GERBER and its employees. They will be proud to have such a great fan

I will do my best to realize your proposal about FISKARS brand example.
I’m sorry I don’t have FISKARS brand one. So please give me detailed information.I saw your previous post↓
/post/1887382
The tip angle of utility blade (awl) looks sharper than the others.
Is there anything difference ???すみません、ひらぼう
このスレッドからのメール通知を見逃していました。 Fiskarsをすぐに入手し、バージョン2のマルチプライヤーの1つと共に詳細な写真を撮ります。
親切な言葉もありがとう!
@english said:
Sorry, hirabooI had missed the email notice from this thread. I will get the Fiskars out soon and take some more detailed photos alongside one of the version 2 multi pliers.
Thank you for the kind words as well!
-
@gerleatherberman said:
Sorry, hirabooI had missed the email notice from this thread. I will get the Fiskars out soon and take some more detailed photos alongside one of the version 2 multi pliers.
Thank you for the kind words as well!
No problem, GLBM

Please when you have time :)By the way,
I purchased the FIRST PRODUCTION RUN model with box, cloth sheath and instructions on ebay.
As I wrote above, to revise my charts, I read FPR instructions for the first time.
( We usually don’t read the instructions very often, do we? :D )Maybe someone pointed out this before, but I want to mention it again.
FPR have a scissors. But in the instructions, there is how to pull out UTILITY BLADE/ALTERNATE COMPONENT. :o
Moving on to the next chapter, there is the word “scissors/file”.
I had thought that they changed alternate component depending on demand, user request, or cost. Now I came up with the idea that they were thinking about producing three different models from beginning.
As if there are various models in MP600.Wait, in case of Mr. Pinchy, all models have a common serial number.
Regardless of the ALTERNATE COMPONENT, I think all silver models have #55800 and all black models have #55860. ???Hmm, I found a little mystery. :ahhh
But it’s fun to imagine all about Mr. Pinchy and the people who made it. ;)FIGURE
Above - instructions of FPR
Below - instructions of MP600

-
@hiraboo said:
Wait, in case of Mr. Pinchy, all models have a common serial number.
Regardless of the ALTERNATE COMPONENT, I think all silver models have #55800 and all black models have #55860. ???Hmm, I found a little mystery. :ahhh
But it’s fun to imagine all about Mr. Pinchy and the people who made it. ;)I have a couple of older Mr Pinchies still NIB
Gerber printed it as "ITEM NO. 55800" (stainless) and "ITEM NO. 55860" (black) on my boxes
I think it is better regarded as a part number or item number rather than an individual serial number. A part number is shared with all the other tools that are the same model, whereas a serial number is usually unique to each individual example of the tool (and incremented by 1 as each tool is made). Perhaps it is a language/nomenclature confusion ?
Thanks for the images of the instructions, it is quite useful in showing the difference between the MP600 variants that it covered. It would be nice to see the same for the Fisherman and Cable Cutter variants.
-
@gregozedobe said:
I have a couple of older Mr Pinchies still NIBGerber printed it as "ITEM NO. 55800" (stainless) and "ITEM NO. 55860" (black) on my boxes
I think it is better regarded as a part number or item number rather than an individual serial number. A part number is shared with all the other tools that are the same model, whereas a serial number is usually unique to each individual example of the tool (and incremented by 1 as each tool is made). Perhaps it is a language/nomenclature confusion ?
Thanks for the images of the instructions, it is quite useful in showing the difference between the MP600 variants that it covered. It would be nice to see the same for the Fisherman and Cable Cutter variants.
gregozedobe (Let me call you Greg),
Thank you for correcting my mistake.

As you say, I should have written “item number” instead of “serial number”. I had misunderstood their meaning. (>_<)
Your explanation is very easy to understand. I appreciate you for teaching me new knowledge!!( There are many things I don't know about MT. For example, I think "NIB" means "New Item in Box" (;´д`) )
I’m sorry, I have only a few MP600s.
If there is any useful material, I would like to introduce it again!! -
@hiraboo said:
No problem, GLBM
Please when you have time :)By the way,
I purchased the FIRST PRODUCTION RUN model with box, cloth sheath and instructions on ebay.
As I wrote above, to revise my charts, I read FPR instructions for the first time.
( We usually don’t read the instructions very often, do we? :D )Maybe someone pointed out this before, but I want to mention it again.
FPR have a scissors. But in the instructions, there is how to pull out UTILITY BLADE/ALTERNATE COMPONENT. :o
Moving on to the next chapter, there is the word “scissors/file”.
I had thought that they changed alternate component depending on demand, user request, or cost. Now I came up with the idea that they were thinking about producing three different models from beginning.
As if there are various models in MP600.Wait, in case of Mr. Pinchy, all models have a common serial number.
Regardless of the ALTERNATE COMPONENT, I think all silver models have #55800 and all black models have #55860. ???Hmm, I found a little mystery. :ahhh
But it’s fun to imagine all about Mr. Pinchy and the people who made it. ;)FIGURE
Above - instructions of FPR
Below - instructions of MP600ヒラブーの最初のプロダクションで素晴らしい発見!おめでとうございます!

それはあなたが指示で読んでいるクールです。 V1.1BO用に箱を掘り出し、指示を確認する必要があります。確かに、使用しないものに関する指示のみを読んでいます。

確かに、私のすべては同時にアイテム番号も持っています。ステンレスと酸化物。
初期のマルチツール作成に携わった人々についても同じように感じています。彼らは自分たちがしていることについてどのように感じましたか?彼らは仕事を楽しんでいましたか?上司がもっと生産が必要だと言ったとき、彼らは何を思いましたか?等々。

ピンチとマルチプライヤー600の手順と、マルチプライヤーの混乱を解決するための努力、ヒラブーを投稿していただきありがとうございます。

ここに私が約束した写真があります。私はまだ新しい電話カメラに精通しているので、彼らが大丈夫であることを願っています。





@english said:
Great find with the first production run, hiraboo! Congratulations!That is cool what you read on the instructions. Will have to dig the box out for my V1.1BO and check the instructions. True, as we only read the instructions on things we won't be using.
Indeed, all of mine have the concurrent item numbers as well. stainless and oxide.
I feel the same way about the people who were involved with early multi tool making. How did they feel about what they were doing? Did they enjoy the job? What went through their mind when the boss said he needed more production? and so on.
Thank you for posting the instructions for the pinchy and multi plier 600, as well as your efforts in helping sort the multi plier mess out, hiraboo!
Here are the photos I promised. Hope they are OK, as I am still getting acquainted with a new phone camera.
-
@hiraboo said:
gregozedobe (Let me call you Greg),Thank you for correcting my mistake.

As you say, I should have written “item number” instead of “serial number”. I had misunderstood their meaning. (>_<)
Your explanation is very easy to understand. I appreciate you for teaching me new knowledge!!( There are many things I don't know about MT. For example, I think "NIB" means "New Item in Box" (;´д`) )
No worries, I'm happy to help a fellow MT enthusiast, and especially one who makes such good contributions to the general MTo knowledge.

For me, NIB = "New In Box", similarly "NIC" = New In Clamshell"
If you want more reading on abbreviations and acronyms, have a look here:
/topic/2260 -
GLBM,
I feel like climbing up to heaven because of your compliments. (゚▽゚)
I hope we can get something new about the early days of this tool!!Thank you for the detailed photo. You already master the DIGITAL MT (your new phone).
These photos are really helpful. (^o^)
Now I know, when compared, there is no difference about utility blade.
I will incorporate the FISKARS model into the next revision. ٩( ‘ω’ )و…And I envy you possess it (and of course V1.1 BO). (´ρ`)
Greg,
Thank you for teaching me a lot about abbreviations and acronyms. d(⌒o⌒)b
I was relieved to know that even English-speaking people may need help with abbreviations and acronyms.
By the way, it took me a while to realize that Clamshell means Blister pack.
(I beg your pardon? MT in a shell like a pearl? ???) -
@hiraboo said:
GLBM,I feel like climbing up to heaven because of your compliments. (゚▽゚)
I hope we can get something new about the early days of this tool!!Thank you for the detailed photo. You already master the DIGITAL MT (your new phone).
These photos are really helpful. (^o^)
Now I know, when compared, there is no difference about utility blade.
I will incorporate the FISKARS model into the next revision. ٩( ‘ω’ )و…And I envy you possess it (and of course V1.1 BO). (´ρ`)
それが千枚通しの質問を解決するのを助けてくれてうれしいです!
こでの作業に感謝します。多くのメンバーがマルチプライヤーの歴史を整理するために素晴らしい仕事をしましたが、あなたのようにそれを全く示していません。これらの種類のチャートのほとんどは、通常スイスアーミーナイフに関連しています。別の、しかし同じように重要なマルチツール会社であなたがそれをすることに費やした仕事を見てうれしいです。
実際に、最終的にマルチプライヤーのバージョンをしっかりと歴史的に描き、ツールのスタイルや違いのさまざまな理由を確認することもできます。
優しい言葉をありがとう、ひらぼう!新しいチャートを楽しみにしています!

V1.1黒色酸化物は、売り手がV1.0の最初の生産ツールで私にペアでそれを販売したので、運の純粋なストロークでした。良い価格も。私はあなたがすぐに1つを見つけると確信しており、フィスカーも同様にブランド化されています。私のFiskarsブランドバージョンが、私のものよりも良い状態にあることを願っています。
@English said:
Glad it helped clear up the awl question!
And thank you for your work here. A lot of members have done fine work in getting the history of the Multi Pliers straightened out, but have not quite shown it like you have. Most of those types of charts are usually related to Swiss army knives. Nice to see the work you've put into doing it with a different, yet just as important, multi tool company.Indeed it will be great to finally have a solid historical depiction of the Multi Pliers versions and possibly even ascertain different reasons for tool styles and differences.
Thank you for the kind words, hiraboo! Looking forward to the new chart!
The V1.1 black oxide was a pure stroke of luck, as the seller sold it as a pair to me with the V1.0 first production tool. Good price as well. I am sure you'll find one soon, and a fiskars branded one as well. I hope your Fiskars branded version is in better condition than mine was to start.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login