Lets get posting! v2
-
I know the air compressor reads it can handle those type of pressures
But it’s to do with the amount of air the compressor holds
If you notice that only using the tool for a minute and the
air compressor tank is empty and the compressor starts up again to fill the tank
That’s where our little compressors suffer to give full power on the tools -
The do recommend a 2 hp motor for air tools, where as mine is a 1.5 hp.....but that should only affect the duration of of using the tools
Sent from my iPhone using Tapatalk
-
@Wspeed said:
I know the air compressor reads it can handle those type of pressures
But it’s to do with the amount of air the compressor holds
If you notice that only using the tool for a minute and the
air compressor tank is empty and the compressor starts up again to fill the tank
That’s where our little compressors suffer to give full power on the toolsRight okay, that’s exactly what’s happening for me. So I guess that explains it
Sent from my iPhone using Tapatalk
-
The information I got was after I asked a compressor technician
that came to my work to service the compressor that we had to use for work
And I noticed that the tools worked properly at work but not on
my 50 litre compressor and it’s a 2hp compressor that I have
-
What did the technician recommend getting?
Sent from my iPhone using Tapatalk
-
awkward silence
Sent from my iPhone using Tapatalk
-
sorry I was busy working :D
He recommended a belt driven 150 litre compressor
But they aren’t cheap ??? -
@Wspeed said:
sorry I was busy working :D
He recommended a belt driven 150 litre compressor
But they aren’t cheap ???Well of course he is going to say “just get the biggest and most expensive one”...
...that’s the easiest answer to everything..
..I don’t know of any household that has a belt driven 150L air compressor in it...maybe in America; but not on this side of the pond.
Sent from my iPhone using Tapatalk
-
It's not really the pressure you're lacking, but the volume. Most air tools require high CFM, which small compressors can't put out.
Last spring I bought a new 60 gallon (227 litres) 3.7HP compressor, and I ran 3/4" line through my garage, which goes to 1/2" distribution blocks, and I use high flow Milton V-style air fittings with 3/8" air hose.
Now you don't need that to run an air ratchet, but if you're using a 1/4" air hose, ditch that and use a 3/8". It should help out some, but it won't make up for a small capacity, low CFM compressor.
-
@derekmac said:
It's not really the pressure you're lacking, but the volume. Most air tools require high CFM, which small compressors can't put out.Last spring I bought a new 60 gallon (227 litres) 3.7HP compressor, and I ran 3/4" line through my garage, which goes to 1/2" distribution blocks, and I use high flow Milton V-style air fittings with 3/8" air hose.
Now you don't need that to run an air ratchet, but if you're using a 1/4" air hose, ditch that and use a 3/8". It should help out some, but it won't make up for a small capacity, low CFM compressor.
Okay thank you for that info [emoji106]
I will look into that
Sent from my iPhone using Tapatalk
-
Interesting

-
Most people won't need the setup I put in, and the only reason I went with that was because I was painting my Jeep myself, so I needed something that would easily power an air sander and my paint gun without me having to stop and wait for the compressor to catch up. I also put in a dedicated line for painting that has extra filters and a desiccant drier. Yes, I tend to go overboard with things, lol.

Generally a 20 gallon (75 litre) consumer type (direct drive, not belt drive, though belt drive will operate better and won't be as loud) will intermittently operate most air tools without issue. I'm not sure what prices are like on your side of the pond, but they are pretty inexpensive here.
-
Great information derek

I am not sure how much they would cost over here
But hopefully this information will help MMR out a lot -
@derekmac said:
Most people won't need the setup I put in, and the only reason I went with that was because I was painting my Jeep myself, so I needed something that would easily power an air sander and my paint gun without me having to stop and wait for the compressor to catch up. I also put in a dedicated line for painting that has extra filters and a desiccant drier. Yes, I tend to go overboard with things, lol.
Generally a 20 gallon (75 litre) consumer type (direct drive, not belt drive, though belt drive will operate better and won't be as loud) will intermittently operate most air tools without issue. I'm not sure what prices are like on your side of the pond, but they are pretty inexpensive here.
Thank you kind sir!
Sent from my iPhone using Tapatalk
-
Just checked the tracking for the wheel chock I bought
and it looks like it should be delivered on Monday
Which is really quick as it comes from Germany :D -
And I need to fit the wheel chock before I can fit the
strengthening slat that goes at the end of the platform
-
I am off now see you all again tomorrow at some point

-
Fitting the last couple of strengthening slats today
Apart from the one that is going to be near the wheel chock
As I have to wait until I got it so I can see where
I got to drill the holes to fasten the wheel chock
And how I am going to mount it to the platform


-
I will get all of the strengthening slats cut so they
are ready for fitting once I have mounted the wheel chock
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

