Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays
-
Great you're doing this Grant, really looking forward to the following parts

-
Thanks <u>everyone</u> for the interest and participation!

This is the another 'V1s' c. '76 showing more degradation of the die/tooling:

And the blank rear tang is definitely indicative of c.'73 to '75 when paired with a black scissor spring.


I'll certainly cover the topic of blank rear tangs again/more when I circle back for Camping inlay updates in this series.
-
@kamakiri said:
Thanks <u>everyone</u> for the interest and participation!

This is the another 'V1s' c. '76 showing more degradation of the die/tooling:

And the blank rear tang is definitely indicative of c.'73 to '75 when paired with a black scissor spring.


I'll certainly cover the topic of blank rear tangs again/more when I circle back for Camping inlay updates in this series.

-
Great thread... love this model.
It isn’t the inlay, but just seen the car today
It’s 1923 and runs smoothly

-
Great read - I hadn’t realised there were such subtle differences!

-
I could be wrong, but I always thought the Grand Prix inlay was a Packard. Like this 1910 Tourer.
Does anyone know for sure?

(not my picture) -
@Myron said:
I could be wrong, but I always thought the Grand Prix inlay was a Packard. Like this 1910 Tourer.Does anyone know for sure?

(not my picture)It's a Model T fer shure.

Pic from Model T wiki.Height of the lights, windshield support rods, position of the steering wheel and shape of the rear fender are good clues.
....
Didn't think this would evolve into a discussion on actual cars, but I'm glad the thread has some interest! :)
Thanks all for the compliments and participation!

-
I've always found it unfortunate that the stamping dies for the stainless steel emblems couldn't reproduce the details that they could for nickel-silver. I mean, they tried, but a lot of the early ss inlays made with ns dies came out looking just terrible. I have a knife from the early 70s first-attempt-at-ss-inlays where the Vic logo itself is all jagged and messy.
The older ns inlays - the fish and the Model T especially - just have so much more fine detail in them. The buttons on the T and the fine detailed scales on the fish are just great. Later ss inlays got better (the Battle Series inlays are very nice), but I imagine you can do more detail work when you're producing low volume knives and not main catalog numbers like the Grand Prix and Angler/Fisherman.
FWIW I have a bunch (15-20) of the later ss inlays from c. 1980-1996 and a quick look doesn't show any differences. But it was just that - a quick look.
-
@kamakiri said:
It's a Model T fer shure.
Pic from Model T wiki.Height of the lights, windshield support rods, position of the steering wheel and shape of the rear fender are good clues.
....
Didn't think this would evolve into a discussion on actual cars, but I'm glad the thread has some interest! :)
Thanks all for the compliments and participation!

So it is! Thanks for clearing this up. I've always wondered...
-
Follow up from my earlier post...
@jazzbass said:
I've always found it unfortunate that the stamping dies for the stainless steel emblems couldn't reproduce the details that they could for nickel-silver. I mean, they tried, but a lot of the early ss inlays made with ns dies came out looking just terrible. I have a knife from the early 70s first-attempt-at-ss-inlays where the Vic logo itself is all jagged and messy.Found it! It's a Champion from c. 1976. Look at how bad the bottom of the logo is:

@jazzbass said:
FWIW I have a bunch (15-20) of the later ss inlays from c. 1980-1996 and a quick look doesn't show any differences. But it was just that - a quick look.I took a sampling of 8 from across the range of 1982-1996. I used Photoshop to cut out the logo on the first one and overlay on all the others. They all matched up as far as I could tell. The image in the post here is scaled to 1280px wide. Click here for a high res version.

BTW, one more interesting thing is that as far as I can tell the early SS inlays are a different alloy than the later ones. Early SS logos are not (or are weakly) magnetic while the later ones post 1980 are. Using a fairly weak refrigerator magnet, I can lift the magnet from my hand with the post 1980 inlays, but not with the earlier ones. This would suggest that they used an austenitic alloy (like in flatware) for the first attempt and a martensitic steel (like the steel in their blades) for the second.
-
Very interesting jazzbass

I haven't yet seen an early SS Vic. inlay like that myself
-
@jazzbass said:
Follow up from my earlier post...Found it! It's a Champion from c. 1976. Look at how bad the bottom of the logo is:

I took a sampling of 8 from across the range of 1982-1996. I used Photoshop to cut out the logo on the first one and overlay on all the others. They all matched up as far as I could tell. The image in the post here is scaled to 1280px wide. Click here for a high res version.

BTW, one more interesting thing is that as far as I can tell the early SS inlays are a different alloy than the later ones. Early SS logos are not (or are weakly) magnetic while the later ones post 1980 are. Using a fairly weak refrigerator magnet, I can lift the magnet from my hand with the post 1980 inlays, but not with the earlier ones. This would suggest that they used an austenitic alloy (like in flatware) for the first attempt and a martensitic steel (like the steel in their blades) for the second.
Thanks for the follow-up on the post-'80 versions, jazzbass! Seemed pretty clear to me reviewing photos over the years, but I haven't put any effort into confirming that they are essentially the same.
Regarding the magnetic materials, I can confirm that this knife has a magnetic shield and a non-magnetic car inlay c. '76:

Not to get ahead of myself in the series, but I also suspect that the early non-magnetic inlays had different alloys...or at the very least different levels of polish or just different finishes. The earliest copies c. '72/'73 appear quite clearly different to the naked eye when viewed side by side.
I am a bit surprised at how bad that c. '76 shield is, but does explain the 'sudden' and broad use of NS shields again in the '77-'79 range.
-
For the V2n example, I probably should have used this example from a c. '78 Grand Prix Jr.:


Misplaced it a while back and couldn't find it when I started this thread.
Found it today when I was reorganizing some stuff and was putting away some other Grands Prix I was using for a challenge. The other one might be a prettier knife, but this one looks more original and photographs better with the patina. -
Very nice example. It is on my short list

-
Minor update- I have also found Grands Prix (also In no-scissor Jr.) with V1n ‘12 spoke’ scales without clip point blades. Still c. ‘73.
Also finally continuing this series:
Part 2- Catalogs -
Fantastic thread - Love the Grand Prix - Although I only have the one from about '84
The level of knowledge and observation - and size of examples in collections - in these types of threads - never ceases to amaze me!! :o
Thread added to the stickied Identification Resources thread in the SAK board
-

Thanks for the kind comments Huntsman!
I hope this sort of information helps the community more than it hurts my wallet! ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


