Day by Day...a Journey down the 91mm Range
-
Nice review and great photos!

I don’t know exactly why but I have 3 of them. And I do use the fish scaler just not for it’s intended purpose! -
@Max Stone said:
......
But the scissors are certainly the more usable tool when compared to the pliers, so you have to wonder whether it would be better for Victorinox to rather put the scissors on the Angler, as set the Fisherman off on a retirement cruise...
.....Thanks again Max
Hmmm - I always thought both was a good option - So why not bring back the Deluxe Angler? .... Or a Deluxe Fisherman?
-
Added this thread to the SAK Identifiers stickie:
/post/1630522
- Thanks Max (..... again!)
-
Thanks Rapidray
and Huntsman
for the stickie. -
I always get surprised about the little general interest people have on the Mountaineer, and on the "metal file and saw" too, for that matter...

The Mountaineer always was a favorite of mine on the 4 layer department. The only place i feel the Camper/Hiker or Huntsman (wood saw) is useful, is in a purely rural environment, all other situations i feel a saw might be handy, the metal saw/file always takes priority for me, besides also having 4 functions (or more, depending on one's creativity), instead of just one. It's way more useful to saw a wider type of materials than the wood saw, even if slower at that.
But than again, no sak tool is made to be nearly as effective as the actual dedicated tool it's trying to replicate, so the idea is not to be "faster" but to actually "getting the job done" when nothing else is available, and it does that very well, faster or slower :DI'd love to get my hands on a Trail Guide (or 3... :D ), i'd take it for urban 3 layer EDC, over any Climber.
On a side note,
Max, thank you for creating this great thread man

A joy to read on a daily basis, especially for a cellidor (84/91mm line) die hard fan like me...
Yes, another Mountaineer user! Yes!

Max, I gonna thank you again for this thread too. This is like a mini-union for all the Mountaineer Lovers out here. :D
-
I think we’ll have to start a Mountaineering Club

Day 18
There are only six 91mm SAKs in the current range that have a Phillips back tool. We’ve covered five of them so far (Tinker, Super Tinker, Deluxe Tinker, Hiker and Fisherman), so today’s mini-review is on the last one, the Fieldmaster.
The Fieldmaster can be considered the near-identical twin of the Huntsman, as it has the same tool load (scissors and wood saw), just with the Phillips on the back instead of the corkscrew.
However, the Huntsman gets the lion’s share of attention as it’s by far the more popular of the two. The Fieldmaster getting largely ignored.
Like the Huntsman, the Fieldmaster is quite a compact 4-layer SAK, and while you’ll feel it in your pocket, it is usable for EDC on your person.
As a cross-over between urban and outdoor use, the Fieldmaster is certainly worth considering. Especially if you like using the wood saw and see value in having the Phillips over the corkscrew.
Pros:
- Both the scissors and wood saw are good at what they’re designed for.
- Just about pocketable for EDC
Cons:
- Lacks the character of the Huntsman
Bottom line:
A little lost without a strong identity, the Fieldmaster is still a capable SAK with a good set of tools. It’s just questionable whether it gives any real-world advantage over the Huntsman, considering that you get the corkscrew and can still use the can-opener’s driver for cross-head screws.


-
Another great review and photo’s -

I have 3 Fieldmasters...they are all BSA’s Huntsman. Talk about a misunderstood step child...this one only gets loved by Scouts! -
@Max Stone said:
A little lost without a strong identity, the Fieldmaster is still a capable SAK with a good set of tools.What even is a ‘Fieldmaster’, anyway? I mean I know what a huntsman is, and a climber, and a Spartan...but who is the mysterious master of fields, and what does he do?
All we really know is that he prefers working on easily-accessible Phillips screws that don’t need much torque, to drinking wine. The man has his priorities wrong, in my opinion.
-
@fullbreakfast said:
What even is a ‘Fieldmaster’, anyway? I mean I know what a huntsman is, and a climber, and a Spartan...but who is the mysterious master of fields, and what does he do?All we really know is that he prefers working on easily-accessible Phillips screws that don’t need much torque, to drinking wine. The man has his priorities wrong, in my opinion.

-
Just catching up after missing a couple of entries
Great reviews Max
I accidentally became a fan of the Fieldmaster, it's the only backside Phillips I have, but I've found if you have it you'll use it, at least me, I've been EDCing mine for close to a year now
-
Great thread/challenge!

-
Yikes. I've missed several days. The 91mm has such variety yet why am I still searching for the perfect SAK
. -
Thanks Aloha, Greg, Rapidray, El C.

Seems the Fieldmaster gets some love too! Now onto some heavy-lifting...
Day 19
Stepping up from four to five layers today was quite a shock. While yesterday’s 99g Fieldmaster could be pocket-carried, the 150g 5-layered CyberTool M (or CT-34) is a real pants-puller.
This is getting into the 4” Leatherman weight category, and it’s really noticeable at the bottom of your pocket. I had to switch to a belt suspension pocket carry to lift if halfway up the pocket, placing the weight on my belt. This is a common carry for me (even with smaller SAKs), as I find it comfortable and also a good way of not losing your SAK.
So back to the CT-34. This is a really chunky SAK with two layers that are wider than normal; the bit adapter and the pliers. Added to these are scissors and the standard set of blades and openers. Tucked away on the back are the corkscrew, hook and awl tools.
In fact, the CT-34 is just like a Deluxe Tinker, but with a corkscrew replacing the Phillips, and the added bit driver layer. Certainly a very capable tool load.
We covered the 3-layer CyberTool S (CT-29) about two weeks ago, but just as a recap, the bit driver accepts double-ended 4mm bits, 3 of these stored in a clever fold-out carrier that stows under the driver, and the 4th kept in the driver itself, giving a total of 8 combinations. The bit driver is also a decent length, giving good reach and usability of this versatile tool.
While the bit driver is strangely not the central layer, the overall SAK is not too wide to prevent easy turning of the driver when needed.
Pros:
- Very capable bit driver tool
- Includes scissors and pliers for a good tool load
- Plus scales with pen are standard
Cons:
- Large and quite heavy, not really pocketable
- One of the more expensive 91mm models
Bottom line:
Considered the base CyberTool model, the CT-34 is probably the most popular of the bit-driver SAKs. It really is a hefty piece of gear, and you may need to reevaluate your carry options. But I still wonder how necessary it is to carry a bit driver when there are already good fixed driver tools available on many other SAKs.



-
Great write up and photos. The CyberTools are ones that I never got into.

-
Great stuff once again Max - Thanks
@Max Stone said:
It really is a hefty piece of gear, and you may need to reevaluate your carry options. But I still wonder how necessary it is to carry a bit driver when there are already good fixed driver tools available on many other SAKs.Don't forget SAKs don't have to be carried.
I have one of these permanently stationed in my desk and it is used for those 'around the house jobs'.Yesterday I used it to rewire a plug.
The large SD/CO to open up the plug - I needed a smooth pokey tool (not a screw/screwdriver) to get the rubber cover off (Aussie plugs!!)
The CT SD to undo the small connector screws
The scissors and blade to strip the wire - I did not use the wire stripper
- The sheath was old so came off easily.
To my great surprise the wire cutting notch in the pliers was great at cutting the exposed wire - Never used it for that before!
The CT SD to do up the screws
Scissors to cut some electrical tape.
And the large SD to work the cover on again
........Brilliant.It gets used for plenty of other tasks: Opening letters or presents, screwing those tiny screws on kids toys, etc etc
The CT SD bit options are great to have to handEDIT PS: And you know the smallest torx bit fits the screw on the Leatherman replaceable wire cutter -

-
Thanks Rapidray and Huntsman

...and good tip on the wire cutter head.

In addition to keeping SAKs tucked away in various draws in the house and car cubbies, I also use the larger SAKs in a day pack, so they are very versatile for keeping in places other than the pocket. It was just so noticeable switching up from 4 to 5 layers that it reinforced the 4-layer cut-off many use as a guide for pocket EDC.

-
Thanks for yet another good writeup!
I think a lot of our IT/Computer members quite like the Cybertool line of SAK, since the bit drivers are perfect for the job. Weighing in around 150grams does make it a hefty piece of gear, but unless there is a specific need for the pliers from the LM camp skeletool or Juice line, I would much prefer this than Juice/Skeletool. Overall, I just like the quality of SAK tools better.
-
Thanks comis

Yes I think there could be a few computer geeks still around!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login