Day by Day...a Journey down the 91mm Range
-
I think we’ll have to start a Mountaineering Club

Day 18
There are only six 91mm SAKs in the current range that have a Phillips back tool. We’ve covered five of them so far (Tinker, Super Tinker, Deluxe Tinker, Hiker and Fisherman), so today’s mini-review is on the last one, the Fieldmaster.
The Fieldmaster can be considered the near-identical twin of the Huntsman, as it has the same tool load (scissors and wood saw), just with the Phillips on the back instead of the corkscrew.
However, the Huntsman gets the lion’s share of attention as it’s by far the more popular of the two. The Fieldmaster getting largely ignored.
Like the Huntsman, the Fieldmaster is quite a compact 4-layer SAK, and while you’ll feel it in your pocket, it is usable for EDC on your person.
As a cross-over between urban and outdoor use, the Fieldmaster is certainly worth considering. Especially if you like using the wood saw and see value in having the Phillips over the corkscrew.
Pros:
- Both the scissors and wood saw are good at what they’re designed for.
- Just about pocketable for EDC
Cons:
- Lacks the character of the Huntsman
Bottom line:
A little lost without a strong identity, the Fieldmaster is still a capable SAK with a good set of tools. It’s just questionable whether it gives any real-world advantage over the Huntsman, considering that you get the corkscrew and can still use the can-opener’s driver for cross-head screws.


-
Another great review and photo’s -

I have 3 Fieldmasters...they are all BSA’s Huntsman. Talk about a misunderstood step child...this one only gets loved by Scouts! -
@Max Stone said:
A little lost without a strong identity, the Fieldmaster is still a capable SAK with a good set of tools.What even is a ‘Fieldmaster’, anyway? I mean I know what a huntsman is, and a climber, and a Spartan...but who is the mysterious master of fields, and what does he do?
All we really know is that he prefers working on easily-accessible Phillips screws that don’t need much torque, to drinking wine. The man has his priorities wrong, in my opinion.
-
@fullbreakfast said:
What even is a ‘Fieldmaster’, anyway? I mean I know what a huntsman is, and a climber, and a Spartan...but who is the mysterious master of fields, and what does he do?All we really know is that he prefers working on easily-accessible Phillips screws that don’t need much torque, to drinking wine. The man has his priorities wrong, in my opinion.

-
Just catching up after missing a couple of entries
Great reviews Max
I accidentally became a fan of the Fieldmaster, it's the only backside Phillips I have, but I've found if you have it you'll use it, at least me, I've been EDCing mine for close to a year now
-
Great thread/challenge!

-
Yikes. I've missed several days. The 91mm has such variety yet why am I still searching for the perfect SAK
. -
Thanks Aloha, Greg, Rapidray, El C.

Seems the Fieldmaster gets some love too! Now onto some heavy-lifting...
Day 19
Stepping up from four to five layers today was quite a shock. While yesterday’s 99g Fieldmaster could be pocket-carried, the 150g 5-layered CyberTool M (or CT-34) is a real pants-puller.
This is getting into the 4” Leatherman weight category, and it’s really noticeable at the bottom of your pocket. I had to switch to a belt suspension pocket carry to lift if halfway up the pocket, placing the weight on my belt. This is a common carry for me (even with smaller SAKs), as I find it comfortable and also a good way of not losing your SAK.
So back to the CT-34. This is a really chunky SAK with two layers that are wider than normal; the bit adapter and the pliers. Added to these are scissors and the standard set of blades and openers. Tucked away on the back are the corkscrew, hook and awl tools.
In fact, the CT-34 is just like a Deluxe Tinker, but with a corkscrew replacing the Phillips, and the added bit driver layer. Certainly a very capable tool load.
We covered the 3-layer CyberTool S (CT-29) about two weeks ago, but just as a recap, the bit driver accepts double-ended 4mm bits, 3 of these stored in a clever fold-out carrier that stows under the driver, and the 4th kept in the driver itself, giving a total of 8 combinations. The bit driver is also a decent length, giving good reach and usability of this versatile tool.
While the bit driver is strangely not the central layer, the overall SAK is not too wide to prevent easy turning of the driver when needed.
Pros:
- Very capable bit driver tool
- Includes scissors and pliers for a good tool load
- Plus scales with pen are standard
Cons:
- Large and quite heavy, not really pocketable
- One of the more expensive 91mm models
Bottom line:
Considered the base CyberTool model, the CT-34 is probably the most popular of the bit-driver SAKs. It really is a hefty piece of gear, and you may need to reevaluate your carry options. But I still wonder how necessary it is to carry a bit driver when there are already good fixed driver tools available on many other SAKs.



-
Great write up and photos. The CyberTools are ones that I never got into.

-
Great stuff once again Max - Thanks
@Max Stone said:
It really is a hefty piece of gear, and you may need to reevaluate your carry options. But I still wonder how necessary it is to carry a bit driver when there are already good fixed driver tools available on many other SAKs.Don't forget SAKs don't have to be carried.
I have one of these permanently stationed in my desk and it is used for those 'around the house jobs'.Yesterday I used it to rewire a plug.
The large SD/CO to open up the plug - I needed a smooth pokey tool (not a screw/screwdriver) to get the rubber cover off (Aussie plugs!!)
The CT SD to undo the small connector screws
The scissors and blade to strip the wire - I did not use the wire stripper
- The sheath was old so came off easily.
To my great surprise the wire cutting notch in the pliers was great at cutting the exposed wire - Never used it for that before!
The CT SD to do up the screws
Scissors to cut some electrical tape.
And the large SD to work the cover on again
........Brilliant.It gets used for plenty of other tasks: Opening letters or presents, screwing those tiny screws on kids toys, etc etc
The CT SD bit options are great to have to handEDIT PS: And you know the smallest torx bit fits the screw on the Leatherman replaceable wire cutter -

-
Thanks Rapidray and Huntsman

...and good tip on the wire cutter head.

In addition to keeping SAKs tucked away in various draws in the house and car cubbies, I also use the larger SAKs in a day pack, so they are very versatile for keeping in places other than the pocket. It was just so noticeable switching up from 4 to 5 layers that it reinforced the 4-layer cut-off many use as a guide for pocket EDC.

-
Thanks for yet another good writeup!
I think a lot of our IT/Computer members quite like the Cybertool line of SAK, since the bit drivers are perfect for the job. Weighing in around 150grams does make it a hefty piece of gear, but unless there is a specific need for the pliers from the LM camp skeletool or Juice line, I would much prefer this than Juice/Skeletool. Overall, I just like the quality of SAK tools better.
-
Thanks comis

Yes I think there could be a few computer geeks still around!

-
Nice write up and pics Max!

-
Thank you VICMAN

-
Day 20
We now move to the second 5-layer SAK; the Ranger. And here we find, for the first time, the combination of scissors, wood saw and metal saw/file.
You can think of the Ranger as the combined DNA of the Mountaineer (scissors and file) and the Huntsman (scissors and wood saw).
And the file and wood saw are two of the slimmest layers, so the Ranger is no wider than some 4-layered SAKs, and pocket EDC was OK. Although I was using a suspension clip.
Bit what really makes the Ranger special is that every single layer has a back tool, and it’s the only 91mm SAK to have this density of tools. So in addition to the hook, corkscrew and awl that’s standard fare on many SAKs, you get the fine flat screwdriver paired with the wood saw, and the chisel paired with the file.
It’s no wonder that the Ranger is so popular. And it gets the really smart ‘camping’ logo on the top scale, the same design as the one used on the Camper, but a higher quality application that’s printed and then clear gloss top coated, as is the Victorinox logo.
I really enjoyed carrying the Ranger. It’s almost a Swiss Champ on diet, losing the pliers, inline Phillips/magnifier and scaler, but a lot more compact.
Pros:
- Great tool combination
- Full compliment of back tools
- Surprisingly compact for 5-layers
- Well-priced for what it offers
Cons:
- Difficult to fault. Plus scales would have been nice, but can always be added.
Bottom line:
This is the SAK to have if you’re looking for an all-rounder that won’t break the bank. Anything less and it’s a case of a specific tool requirement or lightweight EDC. Anything more and you’re looking at the much more expensive Swiss Champ.



-
Good read Max
I only recently became aware of the Ranger, and the photos show an impressive tool set

-
Very nice!

Great write up and photos
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login