Day by Day...a Journey down the 91mm Range
-
Nice write up and pics Max!

-
Thank you VICMAN

-
Day 20
We now move to the second 5-layer SAK; the Ranger. And here we find, for the first time, the combination of scissors, wood saw and metal saw/file.
You can think of the Ranger as the combined DNA of the Mountaineer (scissors and file) and the Huntsman (scissors and wood saw).
And the file and wood saw are two of the slimmest layers, so the Ranger is no wider than some 4-layered SAKs, and pocket EDC was OK. Although I was using a suspension clip.
Bit what really makes the Ranger special is that every single layer has a back tool, and it’s the only 91mm SAK to have this density of tools. So in addition to the hook, corkscrew and awl that’s standard fare on many SAKs, you get the fine flat screwdriver paired with the wood saw, and the chisel paired with the file.
It’s no wonder that the Ranger is so popular. And it gets the really smart ‘camping’ logo on the top scale, the same design as the one used on the Camper, but a higher quality application that’s printed and then clear gloss top coated, as is the Victorinox logo.
I really enjoyed carrying the Ranger. It’s almost a Swiss Champ on diet, losing the pliers, inline Phillips/magnifier and scaler, but a lot more compact.
Pros:
- Great tool combination
- Full compliment of back tools
- Surprisingly compact for 5-layers
- Well-priced for what it offers
Cons:
- Difficult to fault. Plus scales would have been nice, but can always be added.
Bottom line:
This is the SAK to have if you’re looking for an all-rounder that won’t break the bank. Anything less and it’s a case of a specific tool requirement or lightweight EDC. Anything more and you’re looking at the much more expensive Swiss Champ.



-
Good read Max
I only recently became aware of the Ranger, and the photos show an impressive tool set

-
Very nice!

Great write up and photos
-
Thanks Greg, Rapidray

-
Ranger is definitely my favorite 5 layers amongst them all. Didn't know it is the only tool that has back tools to each layer, good read!
-
Thank you comis

Even though they could...most of the wood saw and file equipped SAKs skip these back tools.

-
@Max Stone said:
Day 20We now move to the second 5-layer SAK; the Ranger. And here we find, for the first time, the combination of scissors, wood saw and metal saw/file.
Bit what really makes the Ranger special is that every single layer has a back tool, and it’s the only 91mm SAK to have this density of tools.
Bottom line:
This is the SAK to have if you’re looking for an all-rounder that won’t break the bank. Anything less and it’s a case of a specific tool requirement or lightweight EDC. Anything more and you’re looking at the much more expensive Swiss Champ.Nice write-up and pics of the Ranger Max!

I have EDC'd a SwissChamp since they first came out, but the Ranger would be my second choice. I have always liked it's tool density.

-
Great thread, Max - really enjoying it! I quite agree that it is odd that the CT34 doesn’t put the bit driver in the middle, which is why I moved mine (though this started life as a CTlite, I robbed the lite/mag layer for another knife mod) and I think it makes it easier to use!

-
@Rizio Il Ghiro said:
Great thread, Max - really enjoying it! I quite agree that it is odd that the CT34 doesn’t put the bit driver in the middle, which is why I moved mine (though this started life as a CTlite, I robbed the lite/mag layer for another knife mod) and I think it makes it easier to use!Nice

-
@Max Stone said:
But I still wonder how necessary it is to carry a bit driver when there are already good fixed driver tools available on many other SAKs.Been enjoying your thread!!!
The main two selling points of the bit driver are 1) the long reach; and 2) the extra bits. If you don't need torx or hex, then the CyberTool M's cost probably isn't worth it. I mostly like it for the two different Phillips bits. Saves me from carrying a 58mm SAK for the smaller Phillips.
Also, there isn't a comparable 5-layer SAK that includes both the mini-pliers and the inline Phillips. Your only other options are the bigger CyberTool L and the SwissChamp.
- FiL
-
@FiL Wisneski said:
Been enjoying your thread!!!The main two selling points of the bit driver are 1) the long reach; and 2) the extra bits. If you don't need torx or hex, then the CyberTool M's cost probably isn't worth it. I mostly like it for the two different Phillips bits. Saves me from carrying a 58mm SAK for the smaller Phillips.
Also, there isn't a comparable 5-layer SAK that includes both the mini-pliers and the inline Phillips. Your only other options are the bigger CyberTool L and the SwissChamp.
- FiL
That Cybertool hex bit has helped me assemble many an item from Ikea!
-
Thanks Fil, Rapidray, VICMAN, fullbreakfast
...and also the good idea on the CT-34 Rizio 
Day 21
Victorinox has six 91mm models in their current range with the LED feature, typically paired with the inline Phillips screwdriver.
We’ve covered two so far, the 3-layer Spartan Lite and the 4-layer Traveler Lite. Today it’s the turn of the 5-layer Huntsman Lite.
As the name implies, this model has the same basic toolset as the Huntsman (scissors and wood saw) with one extra layer between the scissors and the openers to house the LED module and inline Phillips.
Victorinox also saw fit to include Plus scales with the mini-screwdriver/pin accessories as standard, and also the fine screwdriver back tool paired to the wood saw layer.
I’ve been a little critical of the LED in the past, and it is true that later models are a little brighter. But you’ll never use this LED for anything other than close proximity use around your person. Probably OK for most tasks.
I still wish they had designed the LED so that it could clip off and be used independently. I can imagine being in the dark, needing to use the SAK to work on something that needs illumination at the same time.
I can see myself disassembling one to cut a 2.5mm notch in the plastic pivot area below the LED diode, so that I can rotate the module upright and then lift it off the pivot. Would lose some tension on the Phillips and there’s always the risk of losing the LED module, but in an emergency, it would be great to be able to pop the module out. (Comments from modders welcome...)
Anyway, enough ramblings about nice-to-haves. I mentioned in an earlier review on a Lite model that the LED button has an instantaneous feature. Well, the Huntsman Lite I have only has the slide function. You cannot press it briefly. Only slide it back where it locks on permanently. Now I don’t know if this is a newer or older version, but I suspect older, as the LED is a little dimmer. I prefer the momentary feature, and there’s really not much chance of accidentally pressing it as the button is recessed.
In some ways, the Huntsman Lite can be thought of as an Explorer with the wood saw added and the magnifier changed for the LED. Considering how popular the Explorer is, it’s a little surprising that the Huntsman Lite doesn’t get more interest. I suspect that many see it just as an expensive Huntsman with an LED, not realizing that it also includes the excellent inline Phillips.
Pros:
- Good tool set with inline Phillips screwdriver
- Plus scales and accessories standard
Cons:
- LED useful for very close proximity illumination only (maybe a benefit)
- Does not like water (electronics)
Bottom line:
Many of the Lite models suffer the same fate of being largely ignored, which is a shame because the inline Phillips paired with the LED is one of the better tools to be found on a Victorinox. This extra layer, Plus scales and accessories, make the Huntsman Lite an interesting alternative to the standard Huntsman.

-
Nice and informative as usual!

-
Thank you Rapidray

-
Great review.
-
Thanks again Max for a good read - the Huntsman lite also seems to be quite cheap whenever I see it! That grey housed LED seems much dimmer than the the (newer.) clear housed one.....
-
Hey Max
How come you keep finding info that I did not know - I thought I knew most things about the 91mm range

-
The stuff on the saws was fascinating
-
I never knew the camping logo application was different Ranger vs Camper - How do you know that? - Observation? - Although I still, of course, prefer the older metal inlay
-
And I never knew about the momentary press for the Lite switch !! And it works on both of mine (CT- clear and Traveller - grey - Both quite new) - That will be handy - Thanks :)
Not wishing this thread away - But bring on the XAVT - I assume you have one and it will feature - Looking f to hear your thoughts on that beast!!
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login