Day by Day...a Journey down the 91mm Range
-
@Max Stone said:
But I still wonder how necessary it is to carry a bit driver when there are already good fixed driver tools available on many other SAKs.Been enjoying your thread!!!
The main two selling points of the bit driver are 1) the long reach; and 2) the extra bits. If you don't need torx or hex, then the CyberTool M's cost probably isn't worth it. I mostly like it for the two different Phillips bits. Saves me from carrying a 58mm SAK for the smaller Phillips.
Also, there isn't a comparable 5-layer SAK that includes both the mini-pliers and the inline Phillips. Your only other options are the bigger CyberTool L and the SwissChamp.
- FiL
-
@FiL Wisneski said:
Been enjoying your thread!!!The main two selling points of the bit driver are 1) the long reach; and 2) the extra bits. If you don't need torx or hex, then the CyberTool M's cost probably isn't worth it. I mostly like it for the two different Phillips bits. Saves me from carrying a 58mm SAK for the smaller Phillips.
Also, there isn't a comparable 5-layer SAK that includes both the mini-pliers and the inline Phillips. Your only other options are the bigger CyberTool L and the SwissChamp.
- FiL
That Cybertool hex bit has helped me assemble many an item from Ikea!
-
Thanks Fil, Rapidray, VICMAN, fullbreakfast
...and also the good idea on the CT-34 Rizio 
Day 21
Victorinox has six 91mm models in their current range with the LED feature, typically paired with the inline Phillips screwdriver.
Weâve covered two so far, the 3-layer Spartan Lite and the 4-layer Traveler Lite. Today itâs the turn of the 5-layer Huntsman Lite.
As the name implies, this model has the same basic toolset as the Huntsman (scissors and wood saw) with one extra layer between the scissors and the openers to house the LED module and inline Phillips.
Victorinox also saw fit to include Plus scales with the mini-screwdriver/pin accessories as standard, and also the fine screwdriver back tool paired to the wood saw layer.
Iâve been a little critical of the LED in the past, and it is true that later models are a little brighter. But youâll never use this LED for anything other than close proximity use around your person. Probably OK for most tasks.
I still wish they had designed the LED so that it could clip off and be used independently. I can imagine being in the dark, needing to use the SAK to work on something that needs illumination at the same time.
I can see myself disassembling one to cut a 2.5mm notch in the plastic pivot area below the LED diode, so that I can rotate the module upright and then lift it off the pivot. Would lose some tension on the Phillips and thereâs always the risk of losing the LED module, but in an emergency, it would be great to be able to pop the module out. (Comments from modders welcome...)
Anyway, enough ramblings about nice-to-haves. I mentioned in an earlier review on a Lite model that the LED button has an instantaneous feature. Well, the Huntsman Lite I have only has the slide function. You cannot press it briefly. Only slide it back where it locks on permanently. Now I donât know if this is a newer or older version, but I suspect older, as the LED is a little dimmer. I prefer the momentary feature, and thereâs really not much chance of accidentally pressing it as the button is recessed.
In some ways, the Huntsman Lite can be thought of as an Explorer with the wood saw added and the magnifier changed for the LED. Considering how popular the Explorer is, itâs a little surprising that the Huntsman Lite doesnât get more interest. I suspect that many see it just as an expensive Huntsman with an LED, not realizing that it also includes the excellent inline Phillips.
Pros:
- Good tool set with inline Phillips screwdriver
- Plus scales and accessories standard
Cons:
- LED useful for very close proximity illumination only (maybe a benefit)
- Does not like water (electronics)
Bottom line:
Many of the Lite models suffer the same fate of being largely ignored, which is a shame because the inline Phillips paired with the LED is one of the better tools to be found on a Victorinox. This extra layer, Plus scales and accessories, make the Huntsman Lite an interesting alternative to the standard Huntsman.

-
Nice and informative as usual!

-
Thank you Rapidray

-
Great review.
-
Thanks again Max for a good read - the Huntsman lite also seems to be quite cheap whenever I see it! That grey housed LED seems much dimmer than the the (newer.) clear housed one.....
-
Hey Max
How come you keep finding info that I did not know - I thought I knew most things about the 91mm range

-
The stuff on the saws was fascinating
-
I never knew the camping logo application was different Ranger vs Camper - How do you know that? - Observation? - Although I still, of course, prefer the older metal inlay
-
And I never knew about the momentary press for the Lite switch !! And it works on both of mine (CT- clear and Traveller - grey - Both quite new) - That will be handy - Thanks :)
Not wishing this thread away - But bring on the XAVT - I assume you have one and it will feature - Looking f to hear your thoughts on that beast!!
-
-
Good to see you reviewing the Lite models Max. They seem to get overlooked a lot.
I like the Traveller Lite and picked up a Mountaineer Lite last year which is a great combination of metal saw with LED and Phillips. Obviously if you want a proper torch then look elsewhere but as a fall back the LED's will do.

-
Thanks đ, Rizio, Fast Bill

And thanks Huntsman, but youâll have to wait for Day 30...

-
Cool

-
@fullbreakfast said:
That Cybertool hex bit has helped me assemble many an item from Ikea!You assembled Ikea furniture with a SAK?
That must have been a chore.... :o Some take some doing even with proper dedicated SD's... -
...someone say âelectric bit driverâ?

Day 22
So we leave the five layered 91mm SAKs behind us today...they were only three...
And we step into six layers with the CyberTool Lite. Even though there are 91mm SAKs with more layers, the CyberTool Lite is wider than most. Even wider than the 7-layer CyberTool L (CT-41) and the 8-layer Swiss Champ. This is because of the tool load; scissors, pliers, LED and magnifier and of course, the bit driver.
The CyberTool Lite is effectively a CyberTool M with the LED and magnifier as an added layer. Spot something different? Yes...normally the LED is paired with the inline Phillips, but as the CyberTool already has a very capable bit driver, Victorinox were smart enough to rather pair it with the magnifier.
The CyberTool Lite tool configuration also means the LED shines in the same direction as the deployed bit driver. So you can see what you are screwing (always helpful).
As the rest of the tool load is the same as the CyberTool M (CT-34), Iâll refer you back to that mini-review I did a few days ago if you want more details.
Pros:
- Excellent bit driver
- LED points the right direction when using the bit driver
Cons:
- A very large SAK, bigger than a Swiss Champ
- Wonât like water because of the electronics
Bottom line:
The CyberTool Lite is a big SAK, but ideal if you need some extra illumination when using the bit driver. There are reducing options once you get into six layers and above, so it becomes increasingly difficult to make a choice. And this model is one of the more specialized options.


-
Nice review and that light is pretty good from the looks of the photo!

-
Nice review. I didnât know a lot about the Cybertools or 91mm Lits SAKs so your reviews have been nice and informative.
-
Great reviews on the Huntsman Lite and CyberTool Lite Max!

Nice pics too!

-

The lites have never been on my radar, so it's nice reading your reviews -
@Max Stone said:
And thanks Huntsman, but youâll have to wait for Day 30...
Also looking f to seeing which two other non-current SAKs make it into the line up!!
;) -
and you know it is going to be good! 
-
Clue on one...tick-tock...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đ
Register Login