Day by Day...a Journey down the 91mm Range
-
and you know it is going to be good! 
-
Clue on one...tick-tock...

-
Day 23
For some, the 5-layer Ranger is the ideal SAK. It combines the essential large and small blades, bottle and tin openers that double as screwdrivers, scissors, wood saw, file with metal saw, and five tools on the back including the corkscrew, awl, fine screwdriver, chisel and hook.
Victorinox had a few choices of what tool to add to the Ranger, and I’m pleased they chose the pliers. This 6-layer model, known as the Handyman, really does live up to its name.
Only a few tools short of the Swiss Champ (fish scaler and inline Phillips/magnifier), the Handyman is a little easier on the pocket, both in terms of Dollars and weight. Probably the smarter choice, if you can live without the inline Phillips.
Pros:
- Comprehensive tool set
- Quite compact for a 6 layer SAK
Cons:
- Just a little big for pocket EDC, without a suspension clip
- Pliers more like super-tweezers
Bottom line:
Living under the shadow of the iconic Swiss Champ can’t be easy. But the Handyman is a real alternative if you’re looking to save a little in size and cost. Unfortunately, I expect most people will just go straight for its bigger brother and never look back.(NB: last pic compares width to another 6-layer SAK, the CyberTool Lite, reviewed yesterday).




-
Great review of the Handyman Max!

-

Very good review...and great photo of the comparison between the two!

-
I've just been lurking here lately. What a great thread, Max! Nice balanced reviews, and I've enjoyed the responses.

The Handyman is all business and well named. It was my first SAK after a long lost Swisschamp. It had all the tools I used most on my SC and had less bulk overall, so it made for a slightly easier pocket carry. I carried it for two years.
I bought the discontinued Craftsman (with Phillips instead of corkscrew) later because I use the wood saw a lot at work and find the Handyman's corkscrew makes using it uncomfortable. I returned to the HM though because I missed the CS too much. A much better tool than the Phillips as it has multiple and unique uses.
As for the less endowed 91mm knives, I favour the Camper as it's a slim gardening and outdoors carry. Of course it's for the saw, so the Hiker makes more sense from a comfort point of view - but again, the handy corkscrew gives the Camper the edge. It was my pocket carry of choice yesterday when I visited a place with a rambling forest garden.
I find the Explorer great for around home, in the kitchen especially where all front tools see regular use. I much prefer the more centred inline Phillips over the Swisschamp's more offset one, and the Explorer's square section makes it more comfortable in the hand. A great choice if you don't need the saws, pliers, and scaler of the SC. My former brother in law has carried an Explorer in his pocket everywhere for years, and has used it to assemble furniture. For him it's the perfect pocket toolbox.
-
Thanks FB, VICMAN, Rapidray and Sawl for your insightful comments.

-
Max, I continue to enjoy your daily postings on all the models.
The only problem I have with your reporting, however, is that it makes me want to go out and buy all the models I don't have!

(Do you work for the Victorinox marketing department?)

-
Ha! Thanks jph_777, you made me laugh!

I’m not with Vic. Just a good relationship with the Vic agent in South Africa. Although every time I’m in their shop I inevitably end up talking to other customers and being asked the same :D
I’m actually one product short in the current 91mm range, that’s a story by itself. The shop has most of their Victorinox SAKs displayed along one side of the shop, but they keep the limited editions and larger ‘collectors’ editions behind glass.
For about six months I’d been eying the Expedition Lite that they had in a display cabinet, tools closed up but resting against the expedition kit pouch it comes with. It was the only unit they had, so I eventually committed to buying it.
As standard practice, I always go over a new SAK in the store to ensure all is well, and while the salesman was off looking for the original box, I had some time to inspect the SAK.
So it was a shock (for me and the salesman) when I discovered that the tip of the large blade was bent. Someone must have dropped it point down in the shop at some earlier time.
It had to go back to the factory and a replacement ordered, which I’m told should arrive this week. Hopefully still within my 30 day challenge window!

-
Max, on your Expedition Lite knife, is the housing of the light part grey or clear? Mine is grey, but I understand there is a clear housing on some. Someone here on MTO posted a photo of the clear housing and I've wanted it ever since.
-
The one that went back to the factory was grey, not seen what the new one is yet but hopefully will know next week!

Day 24
I am skipping the last 6-layered SAK; the Expedition Lite. Only because the one that should be the focus of today’s attention had to go back to the factory, and hopefully its replacement arrives this week...so it will still get its chance to shine before the challenge is over.
So the next SAK up for consideration is the largest of the officially named CyberTools, the CyberTool L or CT-41.
And while the CyberTool Lite, M and S models are all directly related to one other, the CT-41 is closer to the Handyman than to its CT siblings.
In fact, the CT-41 can be considered a Handyman with the bit driver tool layer added. So it keeps the Handyman’s great tool load of blades, openers, file/metal saw, wood saw, scissors, pliers and five back tools.
It’s because of this relationship to the Handyman, itself so close to the Swiss Champ, that many see the CT-41 as the modern alternative to the Swiss Champ. And it’s identical in width to the Swiss Champ, so while you lose the fish scaler and magnifier, the inline Phillips is replaced by the very capable bit driver.
It’s easy to assume that the CT-41 is the biggest of the CyberTools, especially as it’s called the CyberTool L, but as the pictures below show, the CyberTool Lite is wider that the CT-41 by quite a margin due to the LED module.
Pros:
- Very capable alternative to the Swiss Champ
- Good bit driver
- Plus scales and accessories
Cons:
- Bit driver offset from center so not as easy to use as those on other CyberTools
- Difficult for pocket carry due to size and weight
Bottom line:
The bit driver is one of the newer tools created by Victorinox, and it’s a little at odds with the rest of the SAK tools that blend in more seamlessly. But putting this aside, the CT-41 is the only real alternative to the Swiss Champ, if you are looking for the most functionality in a body that’s no wider.

-
@Max Stone said:
Ha! Thanks jph_777, you made me laugh!
I’m not with Vic. Just a good relationship with the Vic agent in South Africa. Although every time I’m in their shop I inevitably end up talking to other customers and being asked the same :D
I’m actually one product short in the current 91mm range, that’s a story by itself. The shop has most of their Victorinox SAKs displayed along one side of the shop, but they keep the limited editions and larger ‘collectors’ editions behind glass.
For about six months I’d been eying the Expedition Lite that they had in a display cabinet, tools closed up but resting against the expedition kit pouch it comes with. It was the only unit they had, so I eventually committed to buying it.
As standard practice, I always go over a new SAK in the store to ensure all is well, and while the salesman was off looking for the original box, I had some time to inspect the SAK.
So it was a shock (for me and the salesman) when I discovered that the tip of the large blade was bent. Someone must have dropped it point down in the shop at some earlier time.
It had to go back to the factory and a replacement ordered, which I’m told should arrive this week. Hopefully still within my 30 day challenge window!

I hope it does also!

-
Very nice CT-41

-
I finally found some time to read all the posts, and it is an amazing read!
Very well written and very informative. Good job Max

I will take the opportunity to ask a question: What do you guys use the backside chisel for? So far I have been unable to find a suitable use for it. No way to use it for its intended purpose

-
@SirVicaLot said:
I finally found some time to read all the posts, and it is an amazing read!Very well written and very informative. Good job Max

I will take the opportunity to ask a question: What do you guys use the backside chisel for? So far I have been unable to find a suitable use for it. No way to use it for its intended purpose

Paint/sticker scraper?
-
Love the Handyman review. I’ve been considering getting one, but not sure why to choose over just getting theSwissChamp.
-
Kudos Max, what a great series of reviews! I keep enjoying my daily fix and will be sad when this challenge comes to an end. Hope you will take us on another journey then, maybe down the discontinued 91mm range?
Will you crown your personal winner at the end of the month? It would be interesting to know which 91mm is your personal favourite and why.
Keep up the good work!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login