Day by Day...a Journey down the 91mm Range
-
@fullbreakfast said:
That Cybertool hex bit has helped me assemble many an item from Ikea!You assembled Ikea furniture with a SAK?
That must have been a chore.... :o Some take some doing even with proper dedicated SD's... -
...someone say “electric bit driver”?

Day 22
So we leave the five layered 91mm SAKs behind us today...they were only three...
And we step into six layers with the CyberTool Lite. Even though there are 91mm SAKs with more layers, the CyberTool Lite is wider than most. Even wider than the 7-layer CyberTool L (CT-41) and the 8-layer Swiss Champ. This is because of the tool load; scissors, pliers, LED and magnifier and of course, the bit driver.
The CyberTool Lite is effectively a CyberTool M with the LED and magnifier as an added layer. Spot something different? Yes...normally the LED is paired with the inline Phillips, but as the CyberTool already has a very capable bit driver, Victorinox were smart enough to rather pair it with the magnifier.
The CyberTool Lite tool configuration also means the LED shines in the same direction as the deployed bit driver. So you can see what you are screwing (always helpful).
As the rest of the tool load is the same as the CyberTool M (CT-34), I’ll refer you back to that mini-review I did a few days ago if you want more details.
Pros:
- Excellent bit driver
- LED points the right direction when using the bit driver
Cons:
- A very large SAK, bigger than a Swiss Champ
- Won’t like water because of the electronics
Bottom line:
The CyberTool Lite is a big SAK, but ideal if you need some extra illumination when using the bit driver. There are reducing options once you get into six layers and above, so it becomes increasingly difficult to make a choice. And this model is one of the more specialized options.


-
Nice review and that light is pretty good from the looks of the photo!

-
Nice review. I didn’t know a lot about the Cybertools or 91mm Lits SAKs so your reviews have been nice and informative.
-
Great reviews on the Huntsman Lite and CyberTool Lite Max!

Nice pics too!

-

The lites have never been on my radar, so it's nice reading your reviews -
@Max Stone said:
And thanks Huntsman, but you’ll have to wait for Day 30...
Also looking f to seeing which two other non-current SAKs make it into the line up!!
;) -
and you know it is going to be good! 
-
Clue on one...tick-tock...

-
Day 23
For some, the 5-layer Ranger is the ideal SAK. It combines the essential large and small blades, bottle and tin openers that double as screwdrivers, scissors, wood saw, file with metal saw, and five tools on the back including the corkscrew, awl, fine screwdriver, chisel and hook.
Victorinox had a few choices of what tool to add to the Ranger, and I’m pleased they chose the pliers. This 6-layer model, known as the Handyman, really does live up to its name.
Only a few tools short of the Swiss Champ (fish scaler and inline Phillips/magnifier), the Handyman is a little easier on the pocket, both in terms of Dollars and weight. Probably the smarter choice, if you can live without the inline Phillips.
Pros:
- Comprehensive tool set
- Quite compact for a 6 layer SAK
Cons:
- Just a little big for pocket EDC, without a suspension clip
- Pliers more like super-tweezers
Bottom line:
Living under the shadow of the iconic Swiss Champ can’t be easy. But the Handyman is a real alternative if you’re looking to save a little in size and cost. Unfortunately, I expect most people will just go straight for its bigger brother and never look back.(NB: last pic compares width to another 6-layer SAK, the CyberTool Lite, reviewed yesterday).




-
Great review of the Handyman Max!

-

Very good review...and great photo of the comparison between the two!

-
I've just been lurking here lately. What a great thread, Max! Nice balanced reviews, and I've enjoyed the responses.

The Handyman is all business and well named. It was my first SAK after a long lost Swisschamp. It had all the tools I used most on my SC and had less bulk overall, so it made for a slightly easier pocket carry. I carried it for two years.
I bought the discontinued Craftsman (with Phillips instead of corkscrew) later because I use the wood saw a lot at work and find the Handyman's corkscrew makes using it uncomfortable. I returned to the HM though because I missed the CS too much. A much better tool than the Phillips as it has multiple and unique uses.
As for the less endowed 91mm knives, I favour the Camper as it's a slim gardening and outdoors carry. Of course it's for the saw, so the Hiker makes more sense from a comfort point of view - but again, the handy corkscrew gives the Camper the edge. It was my pocket carry of choice yesterday when I visited a place with a rambling forest garden.
I find the Explorer great for around home, in the kitchen especially where all front tools see regular use. I much prefer the more centred inline Phillips over the Swisschamp's more offset one, and the Explorer's square section makes it more comfortable in the hand. A great choice if you don't need the saws, pliers, and scaler of the SC. My former brother in law has carried an Explorer in his pocket everywhere for years, and has used it to assemble furniture. For him it's the perfect pocket toolbox.
-
Thanks FB, VICMAN, Rapidray and Sawl for your insightful comments.

-
Max, I continue to enjoy your daily postings on all the models.
The only problem I have with your reporting, however, is that it makes me want to go out and buy all the models I don't have!

(Do you work for the Victorinox marketing department?)

-
Ha! Thanks jph_777, you made me laugh!

I’m not with Vic. Just a good relationship with the Vic agent in South Africa. Although every time I’m in their shop I inevitably end up talking to other customers and being asked the same :D
I’m actually one product short in the current 91mm range, that’s a story by itself. The shop has most of their Victorinox SAKs displayed along one side of the shop, but they keep the limited editions and larger ‘collectors’ editions behind glass.
For about six months I’d been eying the Expedition Lite that they had in a display cabinet, tools closed up but resting against the expedition kit pouch it comes with. It was the only unit they had, so I eventually committed to buying it.
As standard practice, I always go over a new SAK in the store to ensure all is well, and while the salesman was off looking for the original box, I had some time to inspect the SAK.
So it was a shock (for me and the salesman) when I discovered that the tip of the large blade was bent. Someone must have dropped it point down in the shop at some earlier time.
It had to go back to the factory and a replacement ordered, which I’m told should arrive this week. Hopefully still within my 30 day challenge window!

-
Max, on your Expedition Lite knife, is the housing of the light part grey or clear? Mine is grey, but I understand there is a clear housing on some. Someone here on MTO posted a photo of the clear housing and I've wanted it ever since.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login