Fall Follow-up Fixed Blade 30-day Challenge
-
Didn't like the green, so I re tied the handle in black type 95.

-
That'll work!

-
Right on!

-
@PitCarver said:
Didn't like the green, so I re tied the handle in black type 95.Looks good!
-
@Nix said:
Day: 14 (bonus material)I had a chance to work on a knife I haven't finished making, today. The scales were looking pretty good after a couple of coats of linseed oil. Then I put the first-ever edge on the knife. This required a lot of grinding away--I had left the edge fairly fat for the heat treat. Grinding and sharpening made a big slurry during the process. So, naturally, the slurry got engrained into the fresh scales, making them look a bit dirty.


The blade is made from 1095 and it takes a wicked edge.
You have to love high carbon steel. :D "This knife will cut."I'm tempted to leave the scales as they are--they'll only get dirty later, right?--but it's a new knife, so I'll go back and try to clean them up a bit.

Jack, do you use a belt or a jig to make the primary bevel? It looks really well done!

-
@Barry Rowland said:
Comis, I've been there myself, with 2 sons
Nice pup RF!
Jack, Colonial made a knife that they left the scales unfinished. The story behind it was that your own sweat would create its own finish and a story all it's own. Nice looking knife buddy!
Barry, now that they are both grown up and can stand on their own, it must be a great feeling. On one hand I hope the baby grows up healthy and happy, but on the other I kinda wish he could stay this young and cute a little longer, I am sure any parents would know what I am talking about.
:D -
Day 14

-
Day15
Survive Knife GSO10
This is a "chopper" knife made of 3V, I don't use it all too often for the outdoor due to its weight, but it's the perfect tool to chop open coconuts at home. The coconut juice starts to develop a little patina at the front end, so I put on a patina to the rest of the blade. Love the ergonomics of this knife, the big choil, tilted handle and finger grooves make really easy to chock up on the knife. I like the kydex sheath for the Suvive knife, the knife click into the sheath very securely, and the dangler option makes everything easy to carry and is universal to all their knives.

-
@Barry Rowland said:
Comis, I've been there myself, with 2 sons
Nice pup RF!
Jack, Colonial made a knife that they left the scales unfinished. The story behind it was that your own sweat would create its own finish and a story all it's own. Nice looking knife buddy!

Sent fra min FRD-L09 via Tapatalk
-
Survive Knife GSO10
This is a "chopper" knife made of 3V, I don't use it all too often for the outdoor due to its weight, but it's the perfect tool to chop open coconuts at home. The coconut juice starts to develop a little patina at the front end, so I put on a patina to the rest of the blade. Love the ergonomics of this knife, the big choil, tilted handle and finger grooves make really easy to chock up on the knife. I like the kydex sheath for the Suvive knife, the knife click into the sheath very securely, and the dangler option makes everything easy to carry and is universal to all their knives.

Nice

Sent fra min FRD-L09 via Tapatalk
-
We're at the halfway point, and you're awl making it a great Challenge

-
Day 15
Presenting my U.S made Schrade, I purchased this with my first career paycheck so I can date it to May 1978.
It's been a great all purpose knife with a lot of memories connected to it
-
That's a fabulous looking Schrade, Greg.
They don't make 'em like that anymore.

-
@comis said:
This is a "chopper" knife made of 3V, I don't use it all too often for the outdoor due to its weight, but it's the perfect tool to chop open coconuts at home. The coconut juice starts to develop a little patina at the front end, so I put on a patina to the rest of the blade. Love the ergonomics of this knife, the big choil, tilted handle and finger grooves make really easy to chock up on the knife. I like the kydex sheath for the Suvive knife, the knife click into the sheath very securely, and the dangler option makes everything easy to carry and is universal to all their knives.I can imagine that is one heck of a chopper! Nice
swordknife!
-
@comis said:
Jack, do you use a belt or a jig to make the primary bevel? It looks really well done!
Thanks, comis. That knife has a hollow grind done freehand with on the wheel of a belt grinder at the local high school. It's probably my best attempt at a hollow grind, still a bit uneven and inconsistent. The process of grinding a hollow grind has given me a whole new level of appreciation for the talents and skills of some knife makers. :D
-
@Nix said:
That's a fabulous looking Schrade, Greg.They don't make 'em like that anymore.

Thanks Nix
And this is sadly an example of that old saying, I don't remember this knife having a model name, but the pattern still exists as the Golden Spike, I've held one, and it doesn't compare, oddly it has no heft to it I'm sure it wouldn't take the use and abuse the original at least mine has
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
