Day by Day...a Journey down the 91mm Range
-
@Max Stone said:
Day 20We now move to the second 5-layer SAK; the Ranger. And here we find, for the first time, the combination of scissors, wood saw and metal saw/file.
You can think of the Ranger as the combined DNA of the Mountaineer (scissors and file) and the Huntsman (scissors and wood saw).
And the file and wood saw are two of the slimmest layers, so the Ranger is no wider than some 4-layered SAKs, and pocket EDC was OK. Although I was using a suspension clip.
Bit what really makes the Ranger special is that every single layer has a back tool, and it’s the only 91mm SAK to have this density of tools. So in addition to the hook, corkscrew and awl that’s standard fare on many SAKs, you get the fine flat screwdriver paired with the wood saw, and the chisel paired with the file.
It’s no wonder that the Ranger is so popular. And it gets the really smart ‘camping’ logo on the top scale, the same design as the one used on the Camper, but a higher quality application that’s printed and then clear gloss top coated, as is the Victorinox logo.
I really enjoyed carrying the Ranger. It’s almost a Swiss Champ on diet, losing the pliers, inline Phillips/magnifier and scaler, but a lot more compact.
Pros:
- Great tool combination
- Full compliment of back tools
- Surprisingly compact for 5-layers
- Well-priced for what it offers
Cons:
- Difficult to fault. Plus scales would have been nice, but can always be added.
Bottom line:
This is the SAK to have if you’re looking for an all-rounder that won’t break the bank. Anything less and it’s a case of a specific tool requirement or lightweight EDC. Anything more and you’re looking at the much more expensive Swiss Champ.Hi Max
My Ranger came to me for a mere $7 usd. From a flea market. I had to clean and sharpen, but a real gem. I've been carrying it daily for months and love it.
Interestingly older Rangers dont have the hook nor any back tool associated with the wood saw. The metal inlay camping symbol is different...instead of three lines making up the tent, it's one very thick solid line, and the line under the tent extends all the way to the right to underline the word.
Mine has the flouted corkscrew and no hook. One of my new favorites
-
@SirVicaLot said:
You should. I just did last week and it is awesome :DI'll start looking then

Sent fra min FRD-L09 via Tapatalk
-
Do you know when you have to many SAK’s?
When you have a model, ie the Ranger, and you didn’t know you have one already!
-
:D -
Max, another great writeup for the Flagship Swisschamp!

It's was my first SAK gifted to me long ago by family members, back then it meant the world to me, and it still does. Always bring a smile on my face whenever I see one. :D

-
Max, this thread is AWESOME!

Cant wait to see the rest!
-
I love my Swisschamp,
And my Champion. :D -
Thanks again everyone for your feedback, and Huntsman for the interesting idea that Vic may have been responding to the PST when they added pliers. It does seem to line up historically.

Day 26
As we’re approaching the end of this challenge, I have a few discontinued 91mm models to fill out the 30 days.
Seeing we reviewed the Swiss Champ yesterday, it’s only fitting to cover the Swiss Champ Super Timer. This was the first time Victorinox added electronics to a Swiss Army Knife, and the last time they included an analogue timepiece in a pocket knife (together with the similar watch-equipped Compact, the Time Keeper).
Launched a few years after the Swiss Champ in the early 90’s, the Super Timer uses a little quartz module designed to clip into a modified top scale. The watch was made for Victorinox by ETA, a Swiss manufacturer of movements that has a history even older than Victorinox. Today, ETA is part of the giant Swatch Group who also own famous brands such as Omega, Breguet and Glashütte.
The little embedded quartz watch is water resistant with a case that is reminiscent of a Swatch watch, and likely designed by the same team. The case and crystal are plastic and sealed as one unit, with a pop-off cover for the battery compartment. Also zero jewels like a Swatch, but this is not an issue as there’s no tension on the gear-train in a quartz watch, and it has no second hand, keeping the height of the movement within the scale, almost.
The custom top scale is a little deeper than normal and swells slightly to accommodate the watch, strategically at the same point where the awl is stowed - cleverly providing some protection for the crown. Victorinox even cut out the liner to recess the battery cover, as can be seen in the picture.
There’s also a picture of one next to a Swiss Champ from the same era. If you have a newer Swiss Champ you might spot a few differences other than the obvious length of the Phillips and the grey magnifier.
Today, Victorinox uses a digital scale with an LCD to display the time, but ironically, like the analogue Super Timer, only hours and minutes are displayed. Some watch connoisseurs may turn their noses up at an analogue quartz movement, but for this application, it was the right choice.
And as nice as it is to have the additional functions that come with the new digital scale, there’s something timeless about the elegant oval face of the Super Timer. It’s one of my most special SAKs.
Pros:
- It tells the time
- It’s still a Swiss Champ
- The watch module can be removed to deep clean the SAK
Cons:
- Won’t be as robust as a standard SAK
- Discontinued and getting expensive
Bottom line:
The Swiss Champ Super Timer is one of the more unusual discontinued models that today is becoming quite collectible. It’s not the most attractive industrial design, with the watch face a tad too big for the scale, reminding me a little of Salvador Dali’s Persistence of Memory painting. But there’s no denying that Victorinox did a good job marrying these two very different technologies, and this quirkiness even adds to its appeal.



-
Nice one again!

Your cons are the reason I pass on it. I would be more afraid of breaking it in the outdoor environment, dropping it, etc.
-
Yes, that is a concern. But I’ve had Swatches and they’re tough little plastic watches, so it would probably do a respectable job of holding up given it has so much Swatch DNA. But as I only have one, I don’t expect to use mine for EDC.

-
Nice write-up again, Max!

-
This has been such a fun and educational thread for me - awesome work Max!
It has got me thinking about how, almost counter-intuitively, so many of these models seem to have their own special character that you only really discover when you handle and use them day to day. I mean you'd think that with a limited number of permutations based on a small number of different tools there would be a certain sameness to the range, and choosing between knives would be a simple, utilitarian matter. But it certainly doesn't feel that way.
Part of it, I'm sure, is the well thought out system of naming that Victorinox have, which creates a certain personality for the knife right away, and makes it easy to think and talk about the models...it's much more inviting to get involved in a discussion about the relative merits of the Explorer and the Super-Tinker than if they were the V91.42 and the V91.36. No slouches when it came to marketing, these Elseners!
But there is more to it than that I think. Partly down to an effect I first noticed when I was a watch nut many years ago, that small differences you would think are insignificant in objective terms, a couple of millimetres here or a few grams there, can create a huge difference in subjective experience when they apply to these small objects that we share our personal space with on a daily basis. The 4mm difference in thickness between a Climber and an Explorer isn't much, but it's a world of difference in the hand or the pocket.
-
Great write-up and pics of the Swiss Champ Super Timer Max!

-
Thanks VICMAN, Rapidray and Sir Vic

And fullbreakfast, you raise an interesting topic of individuality which is certainly stronger on some SAKs than others, with the name contributing to this. Like watches, SAKs are very tactile and personal items, so it’s not surprising that some are held in higher regard.

Day 27
Victorinox products are generally designed for everyday use. But like many brands, they have realized there’s good business to be made by targeting enthusiasts and collectors.
And while there’s nothing stopping you carrying a limited edition Victorinox Damascus pocket knife for EDC (and people do), the size of the very large SAKs, with 10-15 layers, do tend to limit them to collectors (that, and the price).
But there appears to be one 91mm Victorinox that has a little bit of an identity crisis. Is it for general use, or for the collector? This is the 11-layer Swiss Champ XLT.
Victorinox realized, shortly after launching the CyberTool family in 2000, that they could add the newly-released bit driver to the Swiss Champ and create a super Swiss Champ. But in an unusual decision, Victorinox decided to add a further two layers, one for the Pharmaceutical Spatula and another for a pair of less common short blades, a Pruning and an
Electrician's blade.So Victorinox may have missed an opportunity to upgrade the Swiss Champ with just one extra layer, similar to what they did with the Champion, when they added the inline Phillips and magnifier as a mid-life upgrade from six to seven layers.
But there’s a simple explanation. Victorinox had just released the Swiss Champ XL a year before the CyberTool, and I suspect that as sales were poor on this product, they decided to swap out the golf-specific divot repair tool for the more useful bit driver.
There’s also the need to space products and prices to avoid unnecessary sales cannibalization. A Swiss Champ with a bit driver could put CyberTool L (CT-41) sales at risk and even threaten the Swiss Champ. But I still think they missed an opportunity.
As a side note, it’s common for the XLT to be referred to unofficially as the CT-50, for its 50 functions and tool relationship with the CyperTool family. Maybe if they dropped a couple of questionable layers, they could market it as a 9-layer CyberTool XL?
Pros:
- A Swiss Champ with a bit driver
Cons:
- Unnecessarily extra layers come along for the ride
Bottom line:
The XLT should not be seen as a collector’s SAK, but as a Swiss Champ with an added bit driver, ready to be carried in a bag or glove compartment to tackle any range of tasks...even to handle pharmaceutical products.



-
That is some interesting history! Great review for sure!

-
Pharmaceutical spatula? I thought that was an oar!

-

Good one! -
Love thos thread and the descriptions.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
