Ozark Trail MULTIFORCE - A Leatherman Inspired Multitool
-
This tool is certainly looking promising. I had a CnC MT from Wally World that was a performer. I gave it away but truthfully I had very few complaints. Long term use will be very interesting

-
@Aloha said:
This tool is certainly looking promising. I had a CnC MT from Wally World that was a performer. I gave it away but truthfully I had very few complaints. Long term use will be very interesting
This tool is a very big step above any other Ozark Trail multitool Walmart has ever sold that I can recall.
-
I took the dang thing apart to swap the placement of the SE and PE blades, and (as is all too usual), lost track of where the washers go.
Can anyone with this tool tell me how many washers and where? Thanks.
-
@NetsNJ said:
I took the dang thing apart to swap the placement of the SE and PE blades, and (as is all too usual), lost track of where the washers go.Can anyone with this tool tell me how many washers and where? Thanks.
Oh boy...ummm sort of??? Look on my IG and you can see a pic of the washers in order. Will link it.
Check second image. I know that the big washer goes between the scale and the blade. The smaller washer goes between the blade and frame.
Also... Check this out: -
Awesome, thanks!
-
I thought I had an extra washer. Turns out I am missing a washer! Who knows where it went. Oh well.
Happy Gilmore, that one-sided Multiforce is slick!
-
I picked one up after seeing Happy Gilmores Instagram post. I’ve used it several times since I got it, and it’s a great everyday tool. I just bought one for my dad. Great for the price point. Leatherman does have better quality steel.
-
Picked one up yesterday and other than the cross cut file, no magnet in the bit driver and a poor magnet in the extension it's VERY impressive for $40.00 after tax.
I've already added it to my Wira set to act as a second driver handle. It will also be as a second set of pliars along side my Swisstool or Spirit.
This is a far better tool at a better price than the Wingman in my estimation. As much as it PAINS me to say this WalMart got this one right. -
@Douglas said:
Picked one up yesterday and other than the cross cut file, no magnet in the bit driver and a poor magnet in the extension it's VERY impressive for $40.00 after tax.
I've already added it to my Wira set to act as a second driver handle. It will also be as a second set of pliars along side my Swisstool or Spirit.
This is a far better tool at a better price than the Wingman in my estimation. As much as it PAINS me to say this WalMart got this one right.I agree! One of the best budget multitools out there and it is one that is readily available! The bit driver does not need a magnet since the bits and the extender are held in by a ball bearing on them. I put a small button magnet in mine anyway, and now I can put standard bits in it and do not worry about having them fall out!
I bought a second one and am going to try to mod it at some point.
-
No walmarts down under :'(
-
I wonder who manufactured it for Wally World? The recent post ChopperCharles made about his first LM Wingman reminded me of this tool. Great to hear this tool continues to impress.
-
Crazy how slim the wave feels after handling this for a few days.
-
So some info from people who have been using the tool a bit and have messaged me on IG. There are some issues with the file, for one thing the diamond side isn't flat because they cut the file then applied the diamond coating after. This causes the edges to be higher than the middle of the file. In one case the entire diamond coating began to come off.
So far the two drawbacks:
bad file and the extender doesn't have magnetic retention. The rest still seams to work great. I really loved making this tool into a pocket knife since it has retention on both sides due to the slip joint mechanism. Cheers.
-
This is why Leatherman came out with the gimmicky Free series design. They knew Wave copies were coming and they couldn't do anything to stop it, the designer said so in a magazine interview. I might check one of these out during Christmas when they'll probably be under $20.
-
While it is definitely inspired by the Wave, it is definitely not a clone. It is wider, heaver, has a MUCH different (And better!) bit driver system. The magnet problem can be resolved easily by putting 2 small magnetic disks in the holder. It has no micro screw driver also. It is not better than a Wave by any means, but is more than worth what you pay for it!
-
@gregpost said:
This is why Leatherman came out with the gimmicky Free series design. They knew Wave copies were coming and they couldn't do anything to stop it, the designer said so in a magazine interview. I might check one of these out during Christmas when they'll probably be under $20.Interesting.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
