Vintage SAK Owners Club
-
@MiniChamp said:
Interesting. I keep wondering if the lack of a stamp on my can opener is a singular production error or that maybe they made some of these can openers without any stamp before they even made them with the US PAT PEND stamp. Since there are US PAT PEND can openers on SAKs with all nickel-silver liners, I tend to believe that a production error is more likely.I agree. I'd say the explanation was, from most likely to least likely:
- Production error; the opener never got stamped in production
- Production defect; the opener was stamped but lightly and the stamping was polished off
- The can opener was replaced during a repair after 1971.
-
I think it's probably an error. I doubt they'd issue a single one on purpose without either stamp during that time.

This picture also proves that the tool is stamped separately from markings and that such errors are possible. Wether loading was by hand or automatically fed from a hopper, errors like this would be common. I think it's just a matter of QC for how many get through to assembly stations and ultimately end up leaving the factory.
-
Really great information and pics guys - Thanks so much - And as always especially to JB

Although I start to feel very ignorant and inadequate when you guys get talking!! :(
:oThat mis-stamped cross on the CO is fascinating KK - Never seen that before !!
@kamakiri said:
Thanks for the response and excellent level of detail and documentation, jazzbass! This is the kind of info that should be in the SAKWiki...or in a book.....Yes I have been thinking and wondering about this for a while .... ???
-
Re the book ...... JB - How's it going ? ! ....
;) -
Re the WIki - For now ....... I have put links to this thread and the dating thread on the main 91mm page
PS. One admin point @ kamakiri and rapidray - Please don't quote full posts like you did above
It repeats stuff unnecessarily and clogs up the thread- Usually a quoteless response is sufficient - maybe with a comment such as: *"@ JB re your post above" *
Or just a partial quote
-
-
- Re the book ...... JB - How's it going ? ! ....
;)
Its an excellent question. I stepped away from collecting after some bad/frustrating experiences and being slammed at work. Only within the past 6 mos have I been back at it and gathering info for the book. The biggest challenge with this project is data gathering and organization. I was unhappy with the old database I had so I designed a new one and me and another developer are putting a UI on it to make it useful for information/collection info gathering. That should be done soon.
Then - enter all the info, sort it, and write it up. Or just make the info available via a website? That might be easier. But having a book would be cooler. Like way cooler.
- Re the book ...... JB - How's it going ? ! ....
-
@Huntsman said:
That mis-stamped cross on the CO is fascinating KK - Never seen that before !!Yeah, stuff I 'had to have' when I saw it. Should have thought about putting it in this thread earlier too.
Yeah, sorry about that. I know better, and generally dislike clutter and chatter in 'technical' threads.@jazzbass said:
But having a book would be cooler. Like way cooler.
My suggestion is to do both. I think a nice coffee table sized hardcover would work well for the book. Might as well 'show off' your examples in nice glossy large print. Website should be able to at least pay for itself with advertising links, if you care about that.My collection is more suitable for a xeroxed pamphlet. :-[

-
I’ll try to remember -
@jazzbass said:
I'd say the explanation was, from most likely to least likely:- Production error; the opener never got stamped in production
- Production defect; the opener was stamped but lightly and the stamping was polished off
- The can opener was replaced during a repair after 1971.
I guess it is. I think that JB's explanation #3 is unlikely because this can opener doesn't look like it's post-1971. In terms of finish and some other subtle details it is similar to a US PAT PEND can opener. I attach an image that attempts to illustrate this similarity.

-
@jazzbass said:
Only within the past 6 mos have I been back at it and gathering info for the book.It's really great to have you back.

Or just make the info available via a website? That might be easier. But having a book would be cooler. Like way cooler.
I'm thirsty for your knowledge and I'll be happy with whatever way you choose to serve it, but I believe that a website is the better route. The big problem with a book is that it needs to get completed before it can be made available. This can take forever. A website can be put together with only part of the planned content and then evolve. It can keep changing and expanding along with the progress of your research as well as due to feedback from others. It will also be accessed by a much larger population.
-
^ Great points about the website, but I'd personally like a book.
@MiniChamp said:
I guess it is. I think that JB's explanation #3 is unlikely because this can opener doesn't look like it's post-1971. In terms of finish and some other subtle details it is similar to a US PAT PEND can opener. I attach an image that attempts to illustrate this similarity.Exactly. That's the kind of comparison I was getting at earlier with jnoxyd's 'v1a' opener. A post-'71 opener would have a 'clear' or sharper transition near the nail nick. Your shot clearly shows early type of irregular (hand) machining prior to the polishing. Devil is in the detail comparing many parts. I've probably spent too much time comparing parts using a loupe.
-
Thank YOU for helping us with our special hobby

To bad I found out my Spartan looking +80yoa was a Pradel... :(
It did have the Vic inlay shield. but youz guys thought it was not authentic! -
@jazzbass said:
Its an excellent question. I stepped away from collecting after some bad/frustrating experiences and being slammed at work. Only within the past 6 mos have I been back at it and gathering info for the book. The biggest challenge with this project is data gathering and organization. I was unhappy with the old database I had so I designed a new one and me and another developer are putting a UI on it to make it useful for information/collection info gathering. That should be done soon.Then - enter all the info, sort it, and write it up. Or just make the info available via a website? That might be easier. But having a book would be cooler. Like way cooler.
I want a signed copy

-
Re The Book .......... Some great points about the online version

But a printed book for me - all the way please. ...... And yes, great idea El CS - Signed :D
With all your great photos and information this is something to browse through and absorb 'with a glass of whisky, by the fireside'

SAKWiki is a great online reference tool - But methinks this is something a bit different / special 8)
-
Yup, my thoughts exactly. I have an acquaintance who became the world's expert on wrist chronographs issued to the Royal Canadian Airforce in the 60's, 70's, and 80's. There are lots of people who collect them, but for one person to study them and document the many differences, evolutions, manufacturers, numbers and dates of issue, etc etc took a special effort. He eventually published his own book and sold it on Amazon. Quite the achievement.
Good luck, Jazzbass!
Myron
-
I get so excited even thinking about a book
. There is some really incredible information happening in this thread. Thank you all so much for sharing your knowledge. 
-
Can anyone remind me what the first digits 7 and 8 mean in the model numbers please?

Sent from my iPad using Tapatalk
-
@jnoxyd said:
Can anyone remind me what the first digits 7 and 8 mean in the model numbers please?I can :D
/post/1428436A leading "5", "7", or "8" typically indicated a "special" model - something with tools not part of the standard "Victoria" line (e.g. fine screwdriver, pruner blade, serrated main blade). The Picnicker, for example, is basically a Camper with a serrated main blade and pruner instead of pen blade. It was a model 8237aU, whereas the Camper was a model 237aU. The Handwerkermesser (model 7236maU) was just a Ranger (model 236maU) with a fine screwdriver instead of a pen blade. There really isn't a logical system with these either - for example the Motorist was a 8134ma, the Picknicker was a 8237aU, but the Handwerkermesser was a 7236maU. Why the "7" instead of "8"? All knives were "special" models, all were originally Elinox models, etc. But one started with 7 and the other 8.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

