ZapWizard's Leatherman Free P4 Mods
-


Dislaimer: No promises that this will end up working.
You know what the FREE P4 is lacking: A good diamond file, a longer file, and metal cutting blades. Let us fix that with the versatile T-Shank blade holder!

Okay, so this is something I have had on my list for a while. I have been aware of the T-Shank design that @Tofty did way back in 2013. In fact, his design inspired me to start trying to use 3D printed steel.
Today, a user on Shapeways messaged me asking if I was thinking of a T-Shank blade holder. He thought I could adapt the grip from a Surge, which might be possible with some grinding, but that isn't my style. This got me to head out to Home Depot and get myself some T-Shank blades, and make a detailed 3D model of one. And then spend the next six hours designing something I think may fit the bill.


It will install into a FREE P4 after removing the Saw, File and Spacer Washers from one side. Note: The P2 doesn't use the thin spacers anyways, and it won't really work well with this mod.
If you cut down your blade a bit, you can even keep one in the tool at all times. My plan would be to put in the Leatherman Diamond/Metal file included with the surge. I miss the Diamond File on my wave.

This will be a two-part component, which makes it more expensive than the P2. (Probably around $40)
If the tolerances all work out and the fit works, the two parts will lock together using a dovetail feature. (Shapeways user's idea)You deploy the main potion (orange) using a thumb tab. If the other portion doesn't come along, a pin actually pushes it out at the 90 degree mark. Both halves will mesh, and then be fully locked by the mechanism in the P4.
Each side as half of the T-Shank grip, allowing for quick changing of blades by only sliding away one only half.

The biggest issue is that jig saw blades don't come in just one thickness, I bought a five pack of Bosch blades, and they have three different thickness. (1.0, 1.25 & 1.5mm). The Leatherman File and saw are the thickest at 1.78mm.
Do that end I have included a small "Spring arm" and bump. However, this material isn't terribly springy, it is more bend and stay. It works okay for the Flat bit holder. So a prototype and some testing will be needed. At worst you will end up with the same shim situation that the Surge has now.
I now have a big list of items to prototype and get ready for you folks.
-
That is just... awesome!

-
OK. This could turn the Free into an almost perfect multitool. Now if only it had better blade steel.
Sent from my iPad using Tapatalk
-
@Dutch_Tooler said:
That is just... awesome!

:o 
-
Excellent

-
Good stuff !

-
with all...very nice! 
-
Okay, here is a longish video exclusive for your folks showing the T-Shank holder, both before and after grinding it to fit the Leatherman blades.
Skip to 3:00 to see it holding a T-Shank, with only the dovetailing tolerances corrected.
Skip to 6:40 to see it installed in the tool, and holding a T-Shank in-tool, and modified to fit the Leatherman Blades.Once the tolerances around the dove tail feature were corrected, it works very well on Bosh blades. The biggest issue being accommodating different blade thickness. The little ball on the end of a spring arm works, but not as a spring. This bronze/steel material isn't springy, it acts less like stainless steel, and more like mild steel in this regard. So I need to figure out a better solution for this.
The good news is that I think with some more prototyping this is a viable modification. The other major issue is making it fit Leatherman Surge blades. I think the solution there will be asking folks to grind down the Leatherman T-Shank profile to fit the Bosh profile. After I ground down the tool to hold the Leatherman blade, it was just too loose on the Bosh blades.
In other news:
I also have in hand my Free P2 second prototype holster, as well as holsters for the FREE series with both 4mm and Flat bit holders on the back. I ordered on of my FREE P4 holsters in this config to make a video, and found my current FREE P4 holster has a very tight grip on the springs, making it difficult to use, so that will need correcting. Ever time I have to make any change to the CAD file I have to export over a dozen different variants to update each unique version and it takes lots of time. I will have videos on that, and the updated Flat bit holder soon.
The ST300 holster prototype also arrived, it works okay, but isn't very snappy. So one more prototype on that also.
-
Looks good can’t wait to see the finished product

-
Bloody brilliant!
-
I've only seen the video and not listened to it, so haven't followed the comments and I'm not sure whether you covered this:
On the topic of making the Surge blades fit, would it be an option to make the shank cavity to the depth of the LM shank, with the exception of a circular nub at the position of the hole in the LM shank that locally restricts the cavity depth to the thickness of a Bosch shank *)? Maybe that is sufficient to hold both types. Possibly in combination with a spring with a larger contact area on the shank...
Just thinking

*) Edit: maybe just one of the Bosch thicknesses... 1.25?
-
I CAN'T WAIT for the t-shank holder and the holster with bit slots to be available ... This is gonna cost me a lot!
Regarding the t-shank thickness issue:
On the topic of making the Surge blades fit, would it be an option to make the shank cavity to the depth of the LM shank, with the exception of a circular nub at the position of the hole in the LM shank that locally restricts the cavity depth to the thickness of a Bosch shank *)? Maybe that is sufficient to hold both types. Possibly in combination with a spring with a larger contact area on the shank...
So that circular nub would go on the orange part, if you refer to Zap's post above? Would make sense to me. It would greatly reduce the thickness needed on the other side's "springy arm".
Hey Zap, on another topic, I was wondering if your blade tabs would be reversible? Let's say I'm a big goofy lefty (which I may or may not actually be), and I decided to switch the serrated and the straight blades so the latter is next to my left thumb when I hold the tool. I noticed that the hole egde is ever so sligthly sharper on one side than on the other. Would you tab fit on both sides of the blade so I can use them with my current configuration?
- The dovetail guy on Shapeways ;)
-
Outstanding work, Zapwizard!
Goes to show how much potential this platform has and what LM decided to do with it 
-
@Matpar_McWolfie said:
...Regarding the t-shank thickness issue:So that circular nub would go on the orange part, if you refer to Zap's post above? Would make sense to me. It would greatly reduce the thickness needed on the other side's "springy arm".
...
Yup, that's where it would go, thanks for prompting the clarification

-
The flat bit driver is now available to purchase.
Video:
https://www.youtube.com/watch?v=HYbHVKSohmsThe holster for the FREE P2 is also available:
https://www.youtube.com/watch?v=DPiL9JhfnAgAnd the FREE P2 and P3 bit-holder holsters are also now available. 4mm, Flat, and Flat with Bit extender options.

Finally, the holster for the ST300 is also ready
https://www.youtube.com/watch?v=2mSGhriP1akShop link in my signature below.
-
Very nice

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
