MUT with Surge upgrades
-
@Aloha said:
What an entrance
. Welcome to MTO. Love the MUT too and yours even more. Well done, very well done 
Hey! Thanks for the compliments dudes! First time modding a leatherman, so when everything fits in with minor modification, u can imagine how stoked I was lol. Just couldn't contain the urge to "showoff" hahahha.
-
Thanks for showing it off x-iled

-

Why do our good friend Wspeed have so many bananas?
-
I have reached 60K posts so I am no
longer nuts I am now just bananas :D -
added a victorinox tweezers! because i had previously filed down the bit storage plastic piece to house the longer bit, it was too thin in my opinion to safely carve out the tunnel for the tweezers. I cut up the existing side plastic piece for the pin pusher and made it fit like a stopper for the longer bit. This doubles up as extra thickness for the tunnel carving lol.


and added grip tape to the t shank. huge improvement in thumb flip lol.

-
Nice job

-
decided to swap out the surge scissors for a victorinox one. but i put it at the bronze scrapper location as i have some plans for the current scissors location. Got a stainless steel spacer cut to shape and then had it lazer welded... damn pretty welds by the welder.. extremely happy with how this turned out.




-
That looks really good especially the welding

-
@x-iled said:
decided to swap out the surge scissors for a victorinox one. but i put it at the bronze scrapper location as i have some plans for the current scissors location. Got a stainless steel spacer cut to shape and then had it lazer welded... damn pretty welds by the welder.. extremely happy with how this turned out.



If u drilled out the pivot hole on the Vic scissors, it will also fit there.
I think this is the first time someone did a proper pivot for a Vic scissors to be fitted on a LM. 
-
@Sam Lim said:
If u drilled out the pivot hole on the Vic scissors, it will also fit there.
I think this is the first time someone did a proper pivot for a Vic scissors to be fitted on a LM. 
I dont think it can be done for the MUT scrapper side pin. That hole required is 7mm..something thats different on the MUT. I think the pin only slides in from the scrapper side cuz the other end is the smaller 5.5mm pin.
if I were to bore out the vic scissors I'll be dangerously close to the edge..
-
@x-iled said:
I dont think it can be done for the MUT scrapper side pin. That hole required is 7mm..something thats different on the MUT. I think the pin only slides in from the scrapper side cuz the other end is the smaller 5.5mm pin.if I were to bore out the vic scissors I'll be dangerously close to the edge..
Oh.. Could be my bad. Could be on the other end on the punch side... Really nice work on the welding boss.
-
Clean job on the welding. The Vic scissors are great as are the Surge scissors. Did I miss why you didn't try them?
This is really nice mod on the MUT

-
@Aloha said:
Clean job on the welding. The Vic scissors are great as are the Surge scissors. Did I miss why you didn't try them?This is really nice mod on the MUT

Oh I only had a surge previously and was trying to make the most of it. When I realised I had plans for where I initially put the scissors, I had to change out the location and the surge scissors spring mech can be quite a hassle to make it work on a pin that doesn't have the locking spring. Lol.. so i went and bought a victorinox outrider to transplant its scissors lol
-
yes its me again.. lol.. i tell ya, ive been bit hard by the mod bug... heres another one fresh from the welding table... i got inspired by diresta's whichblade 2 and i made a ratchet attachement to be fitted to the MUT hammer. still need to clean it up and pretty it up properly but this works. and also.. i need to think of a way to lock the attachment in.. currently its only friction ffitted.




and heres a vid of it being deployed lol
Foo Jun Yao on Instagram: "Just so u know that the modding bug really bit me hard and just flooded its entire poison inside me, here is my next mod hahahaha... still very raw from the welders table, need to pretty her up and make her ergonomic to hold. I made a ratchet attachment using the MUT hammer. Got really inspired by @jimmydiresta whichblade 2 .. but I ain't got one tenth the skills that man has... so I did it gettho style. It works. Just have to think of a proper locking mechanism. #xiled #xiled878 #leathermanmod #leatherman #leathermanmut #edc #edcsingapore #multitoolmod #custommultitool #customleatherman #multitools"
153 likes, 6 comments - xiled878 on October 17, 2019: "Just so u know that the modding bug really bit me hard and just flooded its entire poison inside me, here is my next mod hahahaha... still very raw from the welders table, need to pretty her up and make her ergonomic to hold. I made a ratchet attachment using the MUT hammer. Got really inspired by @jimmydiresta whichblade 2 .. but I ain't got one tenth the skills that man has... so I did it gettho style. It works. Just have to think of a proper locking mechanism. #xiled #xiled878 #leathermanmod #leatherman #leathermanmut #edc #edcsingapore #multitoolmod #custommultitool #customleatherman #multitools".
Instagram (www.instagram.com)
-
Nice job again looks great

-
Welcome to
x-iled
Some very awesome mods 8) Thanks for sharing and that weld on those scissors looks crazy good :o 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
