NexTool Flagship Review
-
Off course, this multi-tool is a take on the Z design, which we first saw with the OUTU Multi-tool.
How much has it been changed, then?First of all, it is bigger. It is longer, wider, and thicker than the OUTU. And heavier.
OUTU is 10.3, Flagship is 10.8 cm.
OUTU: 176g or 6.21oz
Flagship: 215g or 7.58oz



The pocketclip is larger, and was moved to the other handle, to make room for the cm scale.

The pliers are different, and are 0.5mm thicker on the Flagship. They also open a bit wider, and have a hard wire-cutter notch. Smaller pivot though.



The insides of the handles are all widened and rounded-off on the Flagship.



The Phillips is better formed, wider, and the piece itself larger on the Flagship. In combination with the wider, stronger handle, this does not feel as weak as the OUTU Phillips.


The blade thumb hole moved, but it is not one-handed as it is. The shape also changed, but the cutting edge is the same. Even in the OUTU, there is room to make the blade longer. Oh well.

The file was replaced by a woodsaw. A welcome change. The file was not that good.

The flathead handle is wider, and the nailnick changed location, now incorporated in the flathead tip.
The flathead is much better formed.



The scissors remained the same, except that on the OUTU they closed past each other, ripping paper with the tips, whereas the Flagship's scissors close perfectly.


So, is it worth it, compared to the OUTU?
Well, it depends. The OUTU goes for $10-12, the Flagship for about $30.
So you can get two OUTUs for the price of one Flagship, with change.
There are many improvements on the design, though. The drivers are better, the saw is much better than that silly file, the handles became wider and more comfortable, the pliers are thicker.
If the blade thumb hole had been done properly, and you were able to open it one-handed, then I'd say it is worth it. Sadly, I'd rather get an OUTU and not care whether I lose or break it.
The Flagship is nice enough, and it is nice to see the design taken down this route, larger, wider, rounder, and with a saw. Still, some screws are not crisp, the drivers have casting marks, and it is considerably heavier than the OUTU. I am excited to see more done with the Z design. If you like the OUTU design, but want better drivers, more comfortable handles, and a saw, then the price goes up. That's how it is. -
@Lynn LeFey said:
Thanks for this review. It looks pretty excellent.
Could I ask what you paid for it?
Also, weird request, but if you have a piece of 550 paracord, could you test the scissors on that? Will it cut the cord with one clean snip? And, if you have some old pants laying around, if you could see if they will cut through the seam portion in one snip as well? I know, it's a bit to ask, but these are two of the tougher cutting tasks I test scissors on. I have no doubt that they'd cut through corrugated cardboard and fairly heavy plastic just by looking at the size.
$31 on Amazon
Flagship and OUTU performed identically.
550 was one snip.
I only have denim, it took one cut for one layer, easy. For the seam, it took three cuts to go past it and reach the one layer.
Denim seam took just one with regular scissors, one with Bessey shears, three with Hercules.

-
-
Thanks for the review.

I notice the NexTool does not have a corkscrew or can opener! Good!
Large scissors and pliers, blade, and screwdrivers --- I wonder how it compares with a LM Juice?
-
@WoodsDuck said:
I am really surprised they changed it so much, even down to the dimensions! Thanks for doing the review, RP. Very nice job
I guess I had seen its dimensions somewhere, but did not think about the size much. It certainly surprised me to see just how big this thing is.

-
@BePrepared said:
Thanks for the review.
I notice the NexTool does not have a corkscrew or can opener! Good!
Large scissors and pliers, blade, and screwdrivers --- I wonder how it compares with a LM Juice?
Thanks!

yup, no openers. Which I like.It's a weird comparison. The Juice S2 has the same tools (more flatheads though), but are smaller than the Flagship's tools. The thing is that the S2 is tiny, and lighter than this thing.
S2 is 123g. Flagship is 215g.
S2 is 3.25" long, Flagship is 4.25".
Quite a difference. -
thanks for the review!

I enjoyed the OUTU while I had it, and this one seems to address many of the issues that the previous one had.A good design that would be *killer *if made by Leatherman or another of the big companies. :ahhh
Enjoy yours!!!
-
Thanks for those additional scissor tests. These sound like excellent scissors.

-
Excellent information and review.
As an owner of the OUTU I'm **really **interested in this model. It's everything I like about the OUTU but refined and enhanced. I'm not as much of a fan of the even newer KT5020; it started adding in all the typical misc extras you find on other tools (can opener, bottle opener, etc), which I don't care for and actually appreciate the absence of on the OUTU and KT5020.
Can anyone possibly help me find a KT5020 in this thread? In the states? Amazon has said currently unavailable all year (2019). I can only seem to find a few vendors in Europe - so far. I've tried contacting a few; none so far have responded to me yet.
I'm pretty devoted to finding one now. If anyone can help me do it, I'd be very grateful, and you're awesome.

-
NexTool KT5024



Same size as the Outu, much better quality.
Oho blade (slipjoint)
Woodsaw (liner-lock)
Needle nose pliers
Monster scissors
Removable ferro rod
Phillips
Flathead with bottle opener
Pocket-clip
Sheath -
NexTool Flagship Pro



-
I have the latest Nextool Flagship model and really like it except the Philips driver. It is on the end of the line cutter and looks like it would twist and bend if any force was put on it. Nextool must change this model quite a bit. There are about four versions of the tool pictured in this review thread!

-
Too bad about the Phillips indeed. The original Flagship has a very robust Phillips.
Three NexTool multi-tools so far. I do not know if the original Outu design is from NexTool or not, but it is great. Even the cheap one is not bad. And NexTool is taking the design to new directions, which is wonderful.

-
Interesting news. Thanks for the update.
Nextorch / Nextool keeps changing things up. I love the z-design, but I'm more of a fan of the simpler NXKT5012 flagship. I get that they're moving to the more traditional fold-out tools with the screwdrivers (that's how everyone else does it). Me though,I really appreciated having the flathead and phillips integrated into the end of the handles.I have the original Outu. I like it and use it all the time. The handle-integrated screwdrivers are incredibly easy to access and use strait away. No pivot to accidentally fold while using. Long reach, one less point of failure.
Unfortunately last week the blade broke on me. Damn. I was using the blade for cutting through several wide sheets of cardboard at work, and with all the pressure the blade eventually just snapped off. No joke. What the hell. Well, I had it for a couple years; and it was cheap after all.
ReamerPunch - your post here is the only reason I even became aware of the NXTK5012 you reviewed originally. God I really want one. It's no longer available on amazon. The only companies who say they have it are in europe. I haven't been able to contact them (yet), although I've sent some messages their way. Nextorch / nextool are based in china, I've tried contacting them, no luck (so far).
Do you have happen to have any idea where I can get one? It's a personal quest now, lol.
I guess I'm in love with the nxtk5012
-
Sorry, no idea. It looks like they discontinued it, which would be a shame.
Perhaps you could arrange something with a forum member who lives in Europe. -
It's cool, thanks for the reply.
If I manage to figure out a way, I'll post it here.
Appreciate the reviews.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login