Mini small knife stash
-
I like a smallish knife. Typically not so big to bring attention, but big enough to get the job done. I personally like about 3" closed for the job, which typically has a little over 2" blade.
Had the opportunity to buy the Mini Tough Lite at a local department store that was going out of business--instead bought a Case; wish I'd splurged, since even with the 30% discount, I'd have less than $50 in both knives.
I've got the standard Southwire hawkbill, but have been meaning to make the jump to the D2 "Edgeforce' version. 8Cr13MOV steel is good, but not really abuse tolerant; as hardened.
-
@Sam Lim said:
The Tuff Lite cannot be spyder flicked. There's a sort of spring that holds the blade in place. Not really flickable. The Lil Native, still a little too "large" and my budget doesn't allow yet..
Pillar, though I have not handled one, I didn't quite like the upward curve of the blade... Though that's one I would get eventually.Please come back and let us know what you think if you got the Pillar.

@Gerhard Gerber said:
I've always liked the look of and wanted a Tuff Lite, but over here it's a lot of money for very little knife.
GG, I am probably stuck in a similar situation as you do.
Most knives are just expensive here since we have the most expensive real estate in the world, for example, the new LM P4 just out, and even at stores with the cheaper rent in town, they are selling at around 200usd. Luckily, shipping from and to my town is not too expensive, so shipping from oversea is a very viable option. -
@comis said:
GG, I am probably stuck in a similar situation as you do.
Most knives are just expensive here since we have the most expensive real estate in the world, for example, the new LM P4 just out, and even at stores with the cheaper rent in town, they are selling at around 200usd. Luckily, shipping from and to my town is not too expensive, so shipping from oversea is a very viable option.Well, first everything gets imported to South African, then we get to import it to Namibia....and then I get to buy it

Funny you should mention the P4, we discussed it this weekend, and my friend who owns the shop where I get most of my sharp goodies remarked about the price and the flawed ergos.....

It's the equivalent of USD 230 locally. -



My smallish knife stash have expanded. Sub 2 to 2.5in blades. Some recent addition and a few more on the way.
The Ganzo was a real surprise! Really cheap and decently made. Better steel than the standard 8CR13s.
The Kabar mini Doizer became my off day carry after some alterations. Added finger choil and a spydie wire clip.
Most disappointing, the Tacnwo which boasted CPMS35VN steel bought from the big A. Read alot of mixed reviews there and on Youtube. Finally made the jump and got one myself. While the built and design is nice, the steel is complete rubbish. Lost the edge after a few cuts on cardboard. Too easy to sharpen and strop which made me think this is a much much softer steel than advertised.
-
Some very nice looking knives you have there!

-
Nice selection of small knives Sam

-
Small knives are where it's at these days

-
Small knives have a class all their own. Ask any die hard SAK fan and they will probably tell you they have anything from a Vic Classic to Minichamp on their keychain or in their pocket. For many, it is all the knife they need. For his birthday, I gave my uncle an AG Russell 3" Bolstered Lockback knife in VG10. It is a small knife and I knew it would be one of the few knives he would actually carry. Up to that point, he ALWAYS carried a Case Small Stockman and I have watched him field dress many deer with that little knife.
I have a pre-packed EDC bag that I throw in the car or motorcycle when traveling and I keep a Vic Executive in there. It is one heck of a knife "pound for pound."
Below are some of my other minis. The Case Cheetah Cub, the Case MiniCopperhead and the tank-tough Buck 55.



-
Nice array, Sam. All my smaller knives are all traditional style, and all my one hand openers are what I consider full sized pocket knives. I think my smallest one hand openers are the SRM H02, and they don't get used often. In fact they're now sacrificial knives, knives I carry when there's a risk of loss, or having to give it up to access somewhere for example, so I don't risk being parted with something I value more.
The smaller knives for me therefore tend to be penknife type, the double ended traditionals, or the 58/65mm Swiss knives.
-
@AimlessWanderer said:
Nice array, Sam. All my smaller knives are all traditional style, and all my one hand openers are what I consider full sized pocket knives. I think my smallest one hand openers are the SRM H02, and they don't get used often. In fact they're now sacrificial knives, knives I carry when there's a risk of loss, or having to give it up to access somewhere for example, so I don't risk being parted with something I value more.The smaller knives for me therefore tend to be penknife type, the double ended traditionals, or the 58/65mm Swiss knives.
Thanks 50. I tend to favour blades with oho and oversized handles. I dun mind a 4-5in handle with a 2-2.5in blade. So sometimes I will just buy them and shorten and reshape to my requirement and preference. A very recent obsession that I have..

-
Nice knives spudley

-
@Sam Lim said:
Thanks 50. I tend to favour blades with oho and oversized handles. I dun mind a 4-5in handle with a 2-2.5in blade. So sometimes I will just buy them and shorten and reshape to my requirement and preference. A very recent obsession that I have..
I can appreciate that. After all, that "big handle, small blade" format works great for many people in the form of a Stanley 99E, or similar. I've known a few people who'd rather have a Stanley knife than any kind of folder.
-
Recently I too have been crazing about smaller knives, especially fixed blade. It's rather rare in the market to find something that has 4in handle and 3in blade, while the stock of the blade is around 2mm(3/32) thick. Everywhere I look, they either use heavy stock 1/8 or above, or the handle is too short(something like 3.5in or under).
-
Thank you!
-
@comis said:
Recently I too have been crazing about smaller knives, especially fixed blade. It's rather rare in the market to find something that has 4in handle and 3in blade, while the stock of the blade is around 2mm(3/32) thick. Everywhere I look, they either use heavy stock 1/8 or above, or the handle is too short(something like 3.5in or under).Thats why I cut down some of my knifes. I made an order for the Lil Native after you mentioned it....
Look like a very suiting candidate for what I have been searching for. Pilar, not so much... not too fond of getting one with a metal handle. Still prefer FRN or G-10.Sad thing is the seller/USPS on Amazon somewhat screwed the order.. 2 weeks into the order and I check with them why it was taking so long... They checked and said the package was sent back to the sender.......... :-\
-
@spudley112 said:
Small knives have a class all their own. Ask any die hard SAK fan and they will probably tell you they have anything from a Vic Classic to Minichamp on their keychain or in their pocket. For many, it is all the knife they need. For his birthday, I gave my uncle an AG Russell 3" Bolstered Lockback knife in VG10. It is a small knife and I knew it would be one of the few knives he would actually carry. Up to that point, he ALWAYS carried a Case Small Stockman and I have watched him field dress many deer with that little knife.I have a pre-packed EDC bag that I throw in the car or motorcycle when traveling and I keep a Vic Executive in there. It is one heck of a knife "pound for pound."
Below are some of my other minis. The Case Cheetah Cub, the Case MiniCopperhead and the tank-tough Buck 55.



The Case Cheetah Cub is really nice!! -
@spudley112 said:
Small knives have a class all their own. Ask any die hard SAK fan and they will probably tell you they have anything from a Vic Classic to Minichamp on their keychain or in their pocket. For many, it is all the knife they need. For his birthday, I gave my uncle an AG Russell 3" Bolstered Lockback knife in VG10. It is a small knife and I knew it would be one of the few knives he would actually carry. Up to that point, he ALWAYS carried a Case Small Stockman and I have watched him field dress many deer with that little knife.I have a pre-packed EDC bag that I throw in the car or motorcycle when traveling and I keep a Vic Executive in there. It is one heck of a knife "pound for pound."
Below are some of my other minis. The Case Cheetah Cub, the Case MiniCopperhead and the tank-tough Buck 55.



Very nice selection!

-
@Sam Lim said:
Thats why I cut down some of my knifes. I made an order for the Lil Native after you mentioned it....
Look like a very suiting candidate for what I have been searching for. Pilar, not so much... not too fond of getting one with a metal handle. Still prefer FRN or G-10.Sad thing is the seller/USPS on Amazon somewhat screwed the order.. 2 weeks into the order and I check with them why it was taking so long... They checked and said the package was sent back to the sender.......... :-\
I hate it whenever that happens...!

Hope you would get to your Lil native ok, and I too do prefer G10/FRN handle for knives, especially if they are small knives. The whole reason of me getting a small knives is to have small footprint and lightweight, I just don't see the point of overbuilding by using Ti/Al handle or heavy blade stock, which kinda ruin the purpose of getting one in the first place.
-
Oh, btw, Sam, you did a fantastic job on making those finger choil, how did you do it? With a dremel or angle grinder? Or just handfiling? I am a little worried I might scratch up the original choil too much if I want to enlarge it.
Most choils I got from knives are usually on a small size, and I would love to find a way to enlarge those choil so my finger have less chance of getting nicked whenever I do want to choke up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
110%