Mini small knife stash
-
Nice array, Sam. All my smaller knives are all traditional style, and all my one hand openers are what I consider full sized pocket knives. I think my smallest one hand openers are the SRM H02, and they don't get used often. In fact they're now sacrificial knives, knives I carry when there's a risk of loss, or having to give it up to access somewhere for example, so I don't risk being parted with something I value more.
The smaller knives for me therefore tend to be penknife type, the double ended traditionals, or the 58/65mm Swiss knives.
-
@AimlessWanderer said:
Nice array, Sam. All my smaller knives are all traditional style, and all my one hand openers are what I consider full sized pocket knives. I think my smallest one hand openers are the SRM H02, and they don't get used often. In fact they're now sacrificial knives, knives I carry when there's a risk of loss, or having to give it up to access somewhere for example, so I don't risk being parted with something I value more.The smaller knives for me therefore tend to be penknife type, the double ended traditionals, or the 58/65mm Swiss knives.
Thanks 50. I tend to favour blades with oho and oversized handles. I dun mind a 4-5in handle with a 2-2.5in blade. So sometimes I will just buy them and shorten and reshape to my requirement and preference. A very recent obsession that I have..

-
Nice knives spudley

-
@Sam Lim said:
Thanks 50. I tend to favour blades with oho and oversized handles. I dun mind a 4-5in handle with a 2-2.5in blade. So sometimes I will just buy them and shorten and reshape to my requirement and preference. A very recent obsession that I have..
I can appreciate that. After all, that "big handle, small blade" format works great for many people in the form of a Stanley 99E, or similar. I've known a few people who'd rather have a Stanley knife than any kind of folder.
-
Recently I too have been crazing about smaller knives, especially fixed blade. It's rather rare in the market to find something that has 4in handle and 3in blade, while the stock of the blade is around 2mm(3/32) thick. Everywhere I look, they either use heavy stock 1/8 or above, or the handle is too short(something like 3.5in or under).
-
Thank you!
-
@comis said:
Recently I too have been crazing about smaller knives, especially fixed blade. It's rather rare in the market to find something that has 4in handle and 3in blade, while the stock of the blade is around 2mm(3/32) thick. Everywhere I look, they either use heavy stock 1/8 or above, or the handle is too short(something like 3.5in or under).Thats why I cut down some of my knifes. I made an order for the Lil Native after you mentioned it....
Look like a very suiting candidate for what I have been searching for. Pilar, not so much... not too fond of getting one with a metal handle. Still prefer FRN or G-10.Sad thing is the seller/USPS on Amazon somewhat screwed the order.. 2 weeks into the order and I check with them why it was taking so long... They checked and said the package was sent back to the sender.......... :-\
-
@spudley112 said:
Small knives have a class all their own. Ask any die hard SAK fan and they will probably tell you they have anything from a Vic Classic to Minichamp on their keychain or in their pocket. For many, it is all the knife they need. For his birthday, I gave my uncle an AG Russell 3" Bolstered Lockback knife in VG10. It is a small knife and I knew it would be one of the few knives he would actually carry. Up to that point, he ALWAYS carried a Case Small Stockman and I have watched him field dress many deer with that little knife.I have a pre-packed EDC bag that I throw in the car or motorcycle when traveling and I keep a Vic Executive in there. It is one heck of a knife "pound for pound."
Below are some of my other minis. The Case Cheetah Cub, the Case MiniCopperhead and the tank-tough Buck 55.



The Case Cheetah Cub is really nice!! -
@spudley112 said:
Small knives have a class all their own. Ask any die hard SAK fan and they will probably tell you they have anything from a Vic Classic to Minichamp on their keychain or in their pocket. For many, it is all the knife they need. For his birthday, I gave my uncle an AG Russell 3" Bolstered Lockback knife in VG10. It is a small knife and I knew it would be one of the few knives he would actually carry. Up to that point, he ALWAYS carried a Case Small Stockman and I have watched him field dress many deer with that little knife.I have a pre-packed EDC bag that I throw in the car or motorcycle when traveling and I keep a Vic Executive in there. It is one heck of a knife "pound for pound."
Below are some of my other minis. The Case Cheetah Cub, the Case MiniCopperhead and the tank-tough Buck 55.



Very nice selection!

-
@Sam Lim said:
Thats why I cut down some of my knifes. I made an order for the Lil Native after you mentioned it....
Look like a very suiting candidate for what I have been searching for. Pilar, not so much... not too fond of getting one with a metal handle. Still prefer FRN or G-10.Sad thing is the seller/USPS on Amazon somewhat screwed the order.. 2 weeks into the order and I check with them why it was taking so long... They checked and said the package was sent back to the sender.......... :-\
I hate it whenever that happens...!

Hope you would get to your Lil native ok, and I too do prefer G10/FRN handle for knives, especially if they are small knives. The whole reason of me getting a small knives is to have small footprint and lightweight, I just don't see the point of overbuilding by using Ti/Al handle or heavy blade stock, which kinda ruin the purpose of getting one in the first place.
-
Oh, btw, Sam, you did a fantastic job on making those finger choil, how did you do it? With a dremel or angle grinder? Or just handfiling? I am a little worried I might scratch up the original choil too much if I want to enlarge it.
Most choils I got from knives are usually on a small size, and I would love to find a way to enlarge those choil so my finger have less chance of getting nicked whenever I do want to choke up.
-
@comis said:
Oh, btw, Sam, you did a fantastic job on making those finger choil, how did you do it? With a dremel or angle grinder? Or just handfiling? I am a little worried I might scratch up the original choil too much if I want to enlarge it.Most choils I got from knives are usually on a small size, and I would love to find a way to enlarge those choil so my finger have less chance of getting nicked whenever I do want to choke up.
I only did the choil on the Kabar and the clasp knife. That depends on mood really.. The clasp knife I brought it to my bench grinder cos I didn't quite care for it :P.. The kabar I was more careful.. I used a diamond cutting disc to roughly shape it out. Then a sanding wheel thingy on a dremel to tidy up. Slow with lots of water cooling. Most work are done on a dremel as that's the only tool I have access to. But I notice the Kabar keeps chipping with light use.. It was quite a boring knife at first..


-
Thats not a bad looking knife...and the choil is a very nice touch

-
Reshaped the Robin again to an angrier Byrd. Appears that the first Tern was horrendous........ Well its the first so I shall be forgiven. Getting the hang of this.

-
@Sam Lim said:
I only did the choil on the Kabar and the clasp knife. That depends on mood really.. The clasp knife I brought it to my bench grinder cos I didn't quite care for it :P .. The kabar I was more careful.. I used a diamond cutting disc to roughly shape it out. Then a sanding wheel thingy on a dremel to tidy up. Slow with lots of water cooling. Most work are done on a dremel as that's the only tool I have access to. But I notice the Kabar keeps chipping with light use.. It was quite a boring knife at first..The dremel work looks nice! I gonna give that a try sometime.
I don't have a dozier, but just from reading the spec, I quite like the dimension of it. 3" blade with 4" handle actually works great for my hand, look forward getting that someday. :D
-
More of a utility knife but very handy. One hand open and close and cheap replacement blades. Comes with a bunch of blades. and made in the US.

-
That is a nice looking utility blade William

-
Thanks for the comments. It is very small but, as you can imagine, crazy sharp.
-
Another small added. It was pretty much a recovery project. Bought it in pretty bad shape. Its a partially serrated Clipit Delica. Hope someone can advise on the generation and the steel type.
Anyway, it was bought as a beater but just couldn't resist doing something to it. Emerson opening was tricky... Lots of trial and error to get it in the right angle for deployment. Not a very clean job, but works somewhat.... pocket is definitely shredded today from all the testing....

Before and after pics.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login