OOPS! - SAK Production Errors
-
Ceramic tweezers...never heard of those but thats a great job you did on that saw blade!

-
@KeepCalmCarryOn said:
Not sure if it’s really an error.
I’m guessing it’s just worn tools on the production line that couldn’t cut quite close enough and it left a bit of excess material on there.
They were only small flakes so just lightly scraped them off with some ceramic tweezers.
Before:

After:

Ohh... It's not an error, i can assure you...
All my saw's look like that before first use. After the first branch cut or two it's fine and clean

My new Camper looks the same, haven't had any saw use yet.

-
@Rapidray said:
Ceramic tweezers...never heard of those but thats a great job you did on that saw blade!

They’re for vaping, so I can fire it and adjust the coil at the same time, I assume metal ones would be a little shocking :D
Cheers for all the other responses, not had it on any of my new saws before.
-

And there are more obvious errors out there:

Super rare +PAT+ version of the can opener.


I guess this one didn't leave the jig before it got hit again!
So somewhere out there there might be a PAT stamp missing its '+'.
-
From another thread:
@Syph007 said:
I took apart a compact the other day and the combo tool had been stamped from the thicker steel that the bottle opener and can opener would be made from. It was so thick the sak was bulging at that end. First time Id see that one.@jazzbass said:
2mm thick? I have a Mechanic Jr that's the same. I always assumed it was 111mm combo tool that was used (intentionally or accidentally) and not a stamping error. Not sure what the pin diameter is on 111mm knives though - 2.5mm? 3mm? If the 111mm knives have bigger pins that would answer the question pretty easily.@Syph007 said:
It had a 2.5mm hole. Was identical to a standard 91mm except for thickness. -
Haven't seen this before...OOPS!

-
Oh wow I would say that is an error
-
Here is mine. The one in the middle. You can see basicly it should comes with a Malaysian army logo cause it's a special eddition but this one doesn't. It's a little bit unbelieverable because it's so obvious. They just let it be there and handed to Malaysia along with those ordinary pieces.


-
^

Found another in a catalog...photographer error:

POST IF YOU FIND IT!!
Spoiler:
what did I say?:ahhh :ahhh :ahhh :ahhh :ahhh




-
Good old scale tools swapped around. Had to be in a hurry, it's so obvious actually handling it that you've goofed up.
-
Ah! Good spot, Gath!

-
@Gath said:
Good old scale tools swapped around. Had to be in a hurry, it's so obvious actually handling it that you've goofed up.Winner, winner!

Spoiler:

Funny how many times we see it in auction listings...but from a big dealer? :o. Sad thing is that it looks like it was 'burned'/darkened a bit to hide the mistake! Funny what had to be done with film in those days...just to save the re-shoot.
-
OK my turn to play one of Kamakiri's guessing games - And the answer will be revealed - Not that you Knights will need any help to find it!
Here's an image of a seven layer Champion from the Wiki Champion page:
https://sakwiki.com/show_image.php?id=1393Spot the error in the photograph.
And for a bonus point explain how this error came about. !!
-
It's a pre-'85 knife sans chisel?
Pre-'79 saw? -
I think you've got it - Comparing text to image - Right? - Can you expand ?
And how did it come about? - This is just my conjecture!
-
There's actually a lot to expand on...
The root cause is that photos like this weren't updated as changes were made. This is typical of almost all their printed material. In this case, based on the pic, the knife is c. '77/'78. So there's a whole lot that changed between then and when chisels were introduced.
hump on the small SD
eye in the awl
90º stop on the caplifter
dropping to the tip grind on the awl
bevel on the mag glass
and some other stuff that's not visible in the pic... -
envy...I got a lot to learn fro youz guyz.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
