Victorinox 91mm Tools Evolution
-
That would be super cool. That site is bookmarked on my IPad and IPhone. I use it pretty often.

-

@MiniChamp said:
So why wake it up now? First, to celebrate the 10th birthday of SAAM's 91mm Tools Evolution site. Second, to try to find out if SAAM's site is essentially a static document that will never be modified, or that there is still a possibility for it to get improved. Is there? Anyone knows?So...?
Anyone knows anything? 
What about this thread?
Should it go to sleep for another five years now?
Is it a good place to discuss Victorinox 91mm Tools Evolution?
How about using it for pointing out problems in SAAM's 91mm Tools Evolution site? This way it may serve as an auxiliary source of information related to the site. Opinions? 
-
Nice work MC.
I know one of our current members knows 'Mr. SAAMS' and contacted him in the last year or so to see if he was going to update the site/page - I cannot remember in which thread this was discusssed

Apparently he was not planning to do so - As he has moved onto other things
Although I know that some dates were added to that Phillips section in the last couple of years as there used to be more ? ? ? ? entries.
Updating this thread or the Work in the Wiki thread would be good for discussions/updates
Should we add this thread to the SAK identification sticky post - I reckon so -
Thanks!

Updating this thread or the Work in the Wiki thread would be good for discussions/updates
Should we add this thread to the SAK identification sticky post - I reckon soGood point about the sticky post. Without such an appropriate link, this thread wouldn't be a good place to discuss SAK evolution.
Anyway, I'd like to point out what I consider to be the most significant "bug" in the current version of SAAM's 91mm Tools Evolution site. It's the year listed for the transition from a 5-loops fluted corkscrew to a 4-loops fluted corkscrew. As is well known, this is one of the many changes that occurred around 1973, but SAAM's site lists it as occurring in 1983. I've seen quite a few MTO posts where this error seems to confuse people. I suspect that it's essentially a typo.
-
@MiniChamp said:
Thanks!
Good point about the sticky post. Without such an appropriate link, this thread wouldn't be a good place to discuss SAK evolution.Anyway, I'd like to point out what I consider to be the most significant "bug" in the current version of SAAM's 91mm Tools Evolution site. It's the year listed for the transition from a 5-loops fluted corkscrew to a 4-loops fluted corkscrew. As is well known, this is one of the many changes that occurred around 1973, but SAAM's site lists it as occurring in 1983. I've seen quite a few MTO posts where this error seems to confuse people. I suspect that it's essentially a typo.
Good news
I've asked SAAM again about "corckscrew bug" and he found ability to fix it. Now I can recommend his site to new SAK collectors without saying every time "it's good for dating but 4 loop corcscrew started in 1973" 

-
That's great jnox - Thanks to you and Mr Saam
@jnoxyd said:
Now I can recommend his site to new SAK collectors without saying every time "it's good for dating but 4 loop corcscrew started in 1973"
You could always recommend this ....... It's had the CS correct for a while!

/post/1629826

It was based on SAAMs originally but now it's a bit more accurate and more detailed than SAAMs - Although not as pretty and well overdue for an update
-
@jnoxyd said:
Good news
I've asked SAAM again about "corckscrew bug" and he found ability to fix it.Wow!
Cool!
Thanks for making it happen, Jnoxyd! 
@MiniChamp said:
to try to find out if SAAM's site is essentially a static document that will never be modified, or that there is still a possibility for it to get improved. Is there? Anyone knows?I guess I got an answer. Now I'm not really sure how I'm supposed to feel about all this. Happy that the most significant bug got fixed or disappointed that my image of backside Phillips screwdriver variants wasn't adopted.
C'est la vie, I guess. :D -
@MiniChamp said:
Wow!
Cool!
Thanks for making it happen, Jnoxyd! 
I guess I got an answer. Now I'm not really sure how I'm supposed to feel about all this. Happy that the most significant bug got fixed or disappointed that my image of backside Phillips screwdriver variants wasn't adopted.
C'est la vie, I guess. :DI'd rather have the dates fixed. I have the 'square' phillips ending c. '82. Lots of examples that are pre-'86 with the round can-key phillips.


-
@kamakiri said:
I'd rather have the dates fixed. I have the 'square' phillips ending c. '82.Certainly before 1985, but I believe that 1983-84 is more likely to be correct. This is because it's relatively common to see a square Phillips on SAKs with the latest eyeless variant of the awl.
Anyway, while there may be a limited scope to the changes that can be expected in SAAM's site, it may be useful to provide more information in the framework of this thread. Hence, the first attached image below shows seven different variants of the backside Phillips screwdriver. Since the shooting direction in this image (which is dictated by the location of the can-key slit) makes it difficult to tell the difference between variant 1a and variant 1b, the second attached image shows these two variants from a different direction.
The identification of these seven variants isn't just my personal preference. AFAIK, it's what emerges from previous MTO discussions. In particular, JazzBass discussed the 1a/1b difference above in this thread and the 2a/2b difference on other threads (see, e.g., /post/1632708). Here is what I can say about these variants:
-
1a. square, double-cut file, no can-key; used 1951-1960.
-
1b. square, single-cut file, no can-key; used 1960-1973.
-
2a. unpolished square, no file, no can-key; Elinox variant: used on Elinox SAKs from 1957 until the early 1970's.
-
2b. polished square, no file, no can-key; a relatively rare variant that was used quite briefly in the early 1970's (probably in 1971-1973; possibly in some overlap with variant 1b).
-
3. polished square, no file, can-key; used 1973-1983.
-
4. round, can-key; used 1983-1991.
-
5. round, no can-key; used since 1991.
Note that these proposed year ranges are guesstimates that may very well be wrong by an error margin of up to two years (but hopefully not more than that). They are based on a combination of my personal observations along with what others (notably JazzBass) reported in the framework of MTO discussions.


-
-
Excellent summary; thank you, MiniChamp.
-

And great photos also!
-

@MiniChamp said:
Certainly before 1985, but I believe that 1983-84 is more likely to be correct. This is because it's relatively common to see a square Phillips on SAKs with the latest eyeless variant of the awl.Part of the reason I think '82 is possible, are the quantities of round phillips found in the '80-'85 range. There are also some finer construction details in specific models I've observed which lead me to believe that it's earlier than '83 and that '82 is the pivot year. I say c. '82, but '83 is certainly possible. I very highly doubt '84. And keep in mind this is only for 91mm.
I've read a lot about the various posts and opinions here. I can't say anybody else has dug deeper than you, me and jazzbass combined on the matter.
@MiniChamp said:
Here is what I can say about these variants:- 1a. square, double-cut file, no can-key; used 1951-1960.
- 1b. square, single-cut file, no can-key; used 1960-1973.
- 2a. unpolished square, no file, no can-key; Elinox variant: used on Elinox SAKs from 1957 until the early 1970's.
- 2b. polished square, no file, no can-key; a relatively rare variant that was used quite briefly in the early 1970's (probably in 1971-1973; possibly in some overlap with variant 1b).
- 3. polished square, no file, can-key; used 1973-1983.
- 4. round, can-key; used 1983-1991.
- 5. round, no can-key; used since 1991.
As I say...Excellent work as usual, MiniChamp! My list is only tighter in a few spots and I express a little more uncertainly on the earlier dates. I'd say your dates are better than a 2 year margin of error otherwise. More like one year +/-, aside from the 1960 peg and the 1951 start.
-
Thanks!

@kamakiri said:
As I say...Excellent work as usual, MiniChamp!Thanks, but...
My list is only tighter in a few spots and I express a little more uncertainly on the earlier dates. I'd say your dates are better than a 2 year margin of error otherwise. More like one year +/-, aside from the 1960 peg and the 1951 start.
??? So what does your list say?
(Other than the square-round transition that was already discussed.) I will greatly appreciate you being a little more concrete. Ultimately, our best chance of getting the most accurate information is by combining our knowledge. If you have somewhat different concrete guesstimates, please say what they are. If you can provide some reasoning that would be even better. Thanks! -
Added this thread - and the Vintage SAK Club thread - to the dating and identification stickie
-
Exellent work MiniChamp! Can I make a compiled picture and simplify the text a little, please? This would be very useful for many SAK collectors.

-
I like this one!

-
Thanks!

Can I make a compiled picture and simplify the text a little, please?
Sure (it looks like you did it already ;) ), but I would prefer it if you replace the line that says "by MiniChamp (forum multitool.org)" with one saying
Source: /post/2041782
(where the URL is the full URL to the message with my original image files). This way potential viewers can get to the full res images along with the latest updates and precise info concerning who said/did what.
-
@MiniChamp said:
Thanks, but... ??? So what does your list say?
(Other than the square-round transition that was already discussed.) I will greatly appreciate you being a little more concrete.My apologies for being unclear and not very specific. Here's one example where I can't peg a date and think the margin of error could be more than 2 years.
For your 1a, I doubt '51 is the exact back phillips start date. I don't know what it is or have a stipulated specific date. All I know is that there are the crab-claw/PWAR copies that don't likely match the +PAT/'51 peg, (or the Vic stated '52) IMO. I suspect earlier, but hard to say by how much. But there are enough variants which I've seen that make me suspect more than a year or two earlier. And I'd also say there's a single-cut variant before this...also different in form that it has and angled 'draft' toward the inner liner, much like the conical awls, but a shallower angle.
@MiniChamp said:
Ultimately, our best chance of getting the most accurate information is by combining our knowledge. If you have somewhat different concrete guesstimates, please say what they are. If you can provide some reasoning that would be even better. Thanks!I completely agree about the combination of knowledge. It's why I feel I had to start posting about some of this at the beginning of 2019. I already intend to share what I know...but I realize as I try to answer questions about one tool that it's really difficult to present out of order. Even kicking off my "Dating in the '70s" out of order starting with the Grand Prix inlays caused me some grief. Sure, it's good information...but it says nothing about the process. And I think that's the important part to explain, which I believe should be explained first. The Grand Prix bit was supposed to help motivate me to get the ball rolling. Had a bit of the opposite effect.
-
For the 1a 'end', I think it's a bit later than '60. I have a small awl knife that looks like a revised, smaller second cut was used. I am assuming the earliest that knife could be is '61, but I think this copy is a bit later. Might be a short lived experiment in '62 or '63.
For 2b, I don't think the end is in '73 for 91mm. Knives that I suspect are late '72 already have the can key. Partly because of the relative rarity of this type, and the availability of the '1b' types that are post- PAT, I think the start may also be '72.
I think that's about as much as I can say without getting into the 'proof' and backup documentation or better explanation.
-
@MiniChamp said:
Thanks!
Sure (it looks like you did it already ;) ), but I would prefer it if you replace the line that says "by MiniChamp (forum multitool.org)" with one sayingSource: /post/2041782
(where the URL is the full URL to the message with my original image files). This way potential viewers can get to the full res images along with the latest updates and precise info concerning who said/did what.
Yes I did it already but I can delete it if you don't like it ;)
Let's stay with your nickname on the picture, these are your work, your pictures. I hate to see here and there Ulli's date sheets without mentioning his authority.
Sorry for misunderstanding, should I put link on the picture?? I think it is not useful: https: //forum.multitool.org/index.php/topic,14646.0.html
Maybe this works better:

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login