Car boot finds
-
@Yadda said:
Six pound, single bit axe? Nice! Tha ceartainly evens out the average axe haul. The telescopic fork may be for campfire cooking marshmallows and frankfurters.Thanks it looks like a good one, my whole haul cost 10pounds (three different sellers) inc that axe so I couldn't leave it there
The fork might get a magnet stuck to the end ;) :D -
@Sparky415 said:
I will take a closer look Thanks Rob
I do have another set with no pin but is still useable (I didn't know what was supposed to be in there)Spring on the pin, then insert the pin in the pliers with the chosen head, turn the bit at the end 90 degrees

-
@TazzieRob said:
Spring on the pin, then insert the pin in the pliers with the chosen head, turn the bit at the end 90 degrees
Thanks Rob,
I took a look this evening and yep it all goes together and is very useable
Incidentally this one is branded Kamasa The other one I have is branded Draper and they are identical except handle colour -
Picked these up this morning
Record 3" vice and the penknife is made by Flli OLIVETO with I think Buffalo scales
-
Nice vise. Needs some TLC, but definitely a keeper.
-
Striking knife looks solid! Been meaning to pick one up for ages as a work knife--they're not too expensive.
-
Is the hack knife a Footprint? I saw a Draper the other day that looked too nice to be used as one. That Record will need a lot of time on the wire wheel, not sure if I would have the courage... I'm way too lazy!! By the way, how's the dumbbell vise base doing?
-
@WWW said:
Is the hack knife a Footprint? I saw a Draper the other day that looked too nice to be used as one. That Record will need a lot of time on the wire wheel, not sure if I would have the courage... I'm way too lazy!! By the way, how's the dumbbell vise base doing?I'm not sure about the maker of the hack knife it's in a pile of future projects
I'm hoping the vice will be OK with a clean up and oil then depending on condition it might get a coat of paint
To be honest if the thing isn't broken it can be used as it is after a drop of oil
The dumbbell vice is getting some use as a vise but mostly its being a heavy weight for gluing :D -
A small haul this morning
Some bags and a box full of new bolts
The little 'pry bar' is a Crown Trade Center paint tin opener
A lovely old Stanley knife
I can't see a stamp on the hobo knife but the blade is carbon steel with a stainless fork
-
Looks like a outdoor faucet key,
JR -
Key?
There's a radiator bleed key attached to the paint tin opener
-
@Sparky415 said:
Key?
There's a radiator bleed key attached to the paint tin opener
Is it a radiator key, it looks bigger then one,
JR -
@MadPlumbarian said:
Is it a radiator key, it looks bigger then one,
JRYes it's only small
-
@Sparky415 said:
The dumbbell vice is getting some use as a vise but mostly its being a heavy weight for gluing :D
Over here some call that yankee ingenuity others call it southern engineering. Me I just call it gettin ur done :D -
Estate sale buy, almost 9 pounds of vintage rusty goodness.
-
A good selection of sockets etc there Mate

That square is going to take some cleaning up :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login