Car boot finds
-
@WWW said:
Is the hack knife a Footprint? I saw a Draper the other day that looked too nice to be used as one. That Record will need a lot of time on the wire wheel, not sure if I would have the courage... I'm way too lazy!! By the way, how's the dumbbell vise base doing?I'm not sure about the maker of the hack knife it's in a pile of future projects
I'm hoping the vice will be OK with a clean up and oil then depending on condition it might get a coat of paint
To be honest if the thing isn't broken it can be used as it is after a drop of oil
The dumbbell vice is getting some use as a vise but mostly its being a heavy weight for gluing :D -
A small haul this morning
Some bags and a box full of new bolts
The little 'pry bar' is a Crown Trade Center paint tin opener
A lovely old Stanley knife
I can't see a stamp on the hobo knife but the blade is carbon steel with a stainless fork
-
Looks like a outdoor faucet key,
JR -
Key?
There's a radiator bleed key attached to the paint tin opener
-
@Sparky415 said:
Key?
There's a radiator bleed key attached to the paint tin opener
Is it a radiator key, it looks bigger then one,
JR -
@MadPlumbarian said:
Is it a radiator key, it looks bigger then one,
JRYes it's only small
-
@Sparky415 said:
The dumbbell vice is getting some use as a vise but mostly its being a heavy weight for gluing :D
Over here some call that yankee ingenuity others call it southern engineering. Me I just call it gettin ur done :D -
Estate sale buy, almost 9 pounds of vintage rusty goodness.
-
A good selection of sockets etc there Mate

That square is going to take some cleaning up :ahhh
-
@Sparky415 said:
A good selection of sockets etc there Mate
That square is going to take some cleaning up :ahhh
Yeah, I threw the square in the lot because I don't have one that size.
. I have three larger ones given to me in similar condition. I'm planning on tackling them at the end of the month. I'll try to take before and after photos.The top pearhead ratchet is a Proto. The slim ratchet at the bottom is a Thorsen. The sockets are an interesting mix of Proto, Williams, SK, and Craftsman. Not a single Thorsen socket.
. -
You can't have too many... :D
-
@Sparky415 said:
You can't have too many... :DThe hatchet I saw was grabbed before I could get to it. ;) :D
Those 80 year old grandmas move fast and throw elbows.

-
Picked up a few bits this morning
The Estwing hammer weighs about 11/2pounds so 16oz head? I'm not sure

-
OMG you find such goodies, I get so jealous, like the skull, but what’s the block under the saw above the hatchet head?
JR -
@MadPlumbarian said:
OMG you find such goodies, I get so jealous, like the skull, but what’s the block under the saw above the hatchet head?
JRThe skull is something I made Mate he likes to get in to my pictures :D
The block on the left is some kind of machinists base for marking/measuring devices and on the right just a flat piece of steel -
@Sparky415 said:
Picked up a few bits this morning
The Estwing hammer weighs about 11/2pounds so 16oz head? I'm not sureThe hammer appears to be the Estwing Model E20S. It is described as a 20 ounce metal shaft rip claw hammer. Real leather cover on the handle. Nice find. They go for $30 US new.
Lots of other nice bits and bobs including the requisite hatchet/axe. :D
-
@Yadda said:
The hammer appears to be the Estwing Model E20S. It is described as a 20 ounce metal shaft rip claw hammer. Real leather cover on the handle. Nice find. They go for $30 US new.Lots of other nice bits and bobs including the requisite hatchet/axe. :D
Thanks Yadda,
The leather on the hammer needs replacing I reckon as it's very dry and loose
I paid 5pounds for the axe and hammer together so I am happy with that! :D
-
@Sparky415 said:
Thanks Yadda,
The leather on the hammer needs replacing I reckon as it's very dry and loose
I paid 5pounds for the axe and hammer together so I am happy with that! :D
I do like Estwing hammers. I have one I picked up on the side of the road 10 years ago. It came in handy when building my shed.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
