Snap or Pinch Closed?
-
Heyo! Got a question for ya'll enthusiasts and collectors -
How do you close your SAK? I hear a lot about how people enjoy the trademark "snap" of a good SAK. Yet in some circles, whether it be for safety or out of respect for the knife, it's a veritable sin to let the tools or blades (especially) snap shut on their own.
I'm the type that generally folds whatever tool/blade I'm using closed with a careful pinch grip, and lower it home with minimal snap. Really, the only time I'll snap a blade shut on it's own is if my other hand is occupied and I want to close the knife for safety, then I'll fold it against my thigh or other surface.
What camo are you in, and are there reasons or benefits to one way or the other?
-
I just close almost all tools with one hand, it's quicker, and also I judge my method safe. If there's no significant grit or any kind of unusual action, I'll just fold the tool with my thumb and let it snap (provided that specific tool does snap).
-
Snap. Because I like the feel and sound of it :D
Maybe I need some kind of therapy

-
Boy that snap in something eh? I let the blade snap from about 1/2 or 1/3 near closed. I don't do this for any particular reason other than instinct.
-
Click, but the corkscrew accompanies it
-
I hardly give that any consideration at all...
I usually snap everything shut with exception of the main blade just because if it closes with enough force, it will lightly graze the liner and spacer, dulling a bit a small area near the tip. That's the only reason why i avoid letting the blade snap too hard.
Saks are designed to take being closed that way, no worries...
-
Snap for sure. As MacGyver pointed out, they are made to be closed that way.
If you take any folding knife when closed, you should be able to push down on the blade and see/feel the blade move down farther into the handle. A properly made folding knife blade "floats" inside the handle. Out of all the folding knives I've owned (100?) only one or two have ever hit the back spring and flattened the edge.
-
Ah... the age-old assessment of the "Walk and Talk" of a slipjoint.
I've always pinched my Victorinox knives closed, and always will. even the OHO ones.
Closing a SAK with "satisfying snap" makes my hair stand on end. That snap is the sound of metal on metal making contact at high velocity. I don't enjoy the sound of teeth grinding against one another, and the "talk" of a slipjoint gives me the same visceral reaction.
I don't feel like I gain anything with the extra second I save with closing a knife with the force of the backspring.
The other tools, maybe a different story - Full-length tools like saws and scissors get folded in slowly in a controlled way. Half-length tools like drivers and openers will often be closed with a snap. That's probably due to the ability to maintain a grip on the shorter tool, as well as the half stop on some tools which changes the dynamics.
-
If the kick (the metal at the base of the blade right behind the notch) on a blade is done properly the sound you hear is the kick hitting the back spring when you snap the blade shut and the blade edge will not hit anything.
I was a Victorinox Dealer for 16 years and I have carried and used Victorinox SAKS since the early '80s and have never had a blade damaged from snapping it shut. I ordered all my SAKs in boxes and personally checked every blade and all the tools on every knife that I got in. .
-
I snap everything shut, unless the pivots have got too dirty and the snap has gone. Oh, and the flathead on my first Sportsman that has no snap at all however clean and lubricated the pivot is. (It had great snap until I opened its layer completely, including the awl, awl at once. I think I bent a pin.
) -
Snap shut. Only time I pinch a blade/tool closed, is on a knife in which the knife has an inadequate kick, and the tip strikes the backspring. That is never on SAKs--Vic never messes up.
-
@VICMAN said:
If the kick (the metal at the base of the blade right behind the notch) on a blade is done properly the sound you hear is the kick hitting the back spring when you snap the blade shut and the blade edge will not hit anything.
I snap everything closed, with the exception of tools like the scissors and saw, which actually have enough flex in them that they don't always close properly if snapped.
-
I guess I'm the weird one.

-
Yepp, snap them close too.
Some SAKs main blades come a tad too close to the liner/keyring-spacer.
I still snap them close which produces a defined dent into the liner/keyring-spacer making space for the blade. A little touch up on the blades to afterwards is all it needs then and the problem is solved forever
-
I vote "snap tools, pinch blade", because I feel the only safe blade is a well controlled one, I almost always keep my blade hair shaving sharp, and even just a small nick at the wrong place would freak everyone in the house or friends surrounding.
-
After giving this some thought, I suppose it depends on how big a hurry I’m in, and which tool I’m using.
-
If it's one of my every day carries it gets snapped.
Once it gets gummy feeling it gets a thorough clean to bring the snap back.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login