What did you use your Sak on today?
-
Bloody beer


-
Nice
:D -
Yesterday at my store I had to swap out the sidecap displays, and my Alox Soldier got plenty of use. First, I needed the main screwdriver to loosen the screws holding the old display to the shelving frames. Next, I used the small screwdriver as a wrench to loosen the finger-bolts on the new display so i could switch sides on it. Finally, I punched some extra holes with the awl to attach some zip-ties to stabilize the whole thing on the shelves.
Later, when I got home, the mail included my birth year Alox Soldier, fresh from Switzerland. Great shape, if dirty.
Sent from my SM-J727T using Tapatalk
-
Great uses and congratulations
on getting your BYSAK
-
@Mattexian said:
Yesterday at my store I had to swap out the sidecap displays, and my Alox Soldier got plenty of use. First, I needed the main screwdriver to loosen the screws holding the old display to the shelving frames. Next, I used the small screwdriver as a wrench to loosen the finger-bolts on the new display so i could switch sides on it. Finally, I punched some extra holes with the awl to attach some zip-ties to stabilize the whole thing on the shelves.Later, when I got home, the mail included my birth year Alox Soldier, fresh from Switzerland. Great shape, if dirty.
Sent from my SM-J727T using Tapatalk
Well done!
-
Here’s one... Not today, but yesterday at work. I was uh... going #2 and was done, and of course the roll was finished. And it’s in one of those metal dispensers that you slide a door on the bottom to dispense the second roll so ok, cool, I do that and thankfully I can feel that there is indeed a second roll in there. Well, the jerks that remodeled our bathrooms made that stall wall really close to the toilet, and the dispenser is mounted to it so it’s right up against my leg. They also mounted it really low, like if I’m getting paper I’m pretty much waving at whoever is in the stall next to me. So it’s awkward getting paper as it is, then you know how with new rolls you have to find the tag end and pull it to get it going? Well... I couldn’t find it. I tried and tried, and just couldn’t. I started getting desperate. I was tearing at the roll with no success and I had no idea what I was going to do.
Enter the Climber.
I got the bright idea to use the small blade to just cut across the roll and then pull at the separated layer and it worked! I got that roll going and was able to leave that stall nice and clean! SAK saves the day!
No picture of the incident for obvious reasons, but here is the blade that saved the day!

Sent from my iPhone using Tapatalk
-
@Manny Sanchez III said:
I used my climber to modify my personal fan that I keep in a cubby under my computer. The way the switch is makes it kinda hard to turn on or off since I have to reach into the cubby and feel my way to find the recessed switch and then grip it with my index and thumb and turn it.Sent from my iPhone using Tapatalk
Great post and photos

-
Excellent use MS

-
Boring, only the mail....

-
Better than nothing

-
@Manny Sanchez III said:
Here’s one... Not today, but yesterday at work. I was uh... going #2 and was done, and of course the roll was finished. And it’s in one of those metal dispensers that you slide a door on the bottom to dispense the second roll so ok, cool, I do that and thankfully I can feel that there is indeed a second roll in there. Well, the jerks that remodeled our bathrooms made that stall wall really close to the toilet, and the dispenser is mounted to it so it’s right up against my leg. They also mounted it really low, like if I’m getting paper I’m pretty much waving at whoever is in the stall next to me. So it’s awkward getting paper as it is, then you know how with new rolls you have to find the tag end and pull it to get it going? Well... I couldn’t find it. I tried and tried, and just couldn’t. I started getting desperate. I was tearing at the roll with no success and I had no idea what I was going to do.Enter the Climber.
I got the bright idea to use the small blade to just cut across the roll and then pull at the separated layer and it worked! I got that roll going and was able to leave that stall nice and clean! SAK saves the day!
No picture of the incident for obvious reasons, but here is the blade that saved the day!

Sent from my iPhone using Tapatalk


-
@Manny Sanchez III said:
Here’s one... Not today, but yesterday at work. I was uh... going #2 and was done, and of course the roll was finished. And it’s in one of those metal dispensers that you slide a door on the bottom to dispense the second roll so ok, cool, I do that and thankfully I can feel that there is indeed a second roll in there. Well, the jerks that remodeled our bathrooms made that stall wall really close to the toilet, and the dispenser is mounted to it so it’s right up against my leg. They also mounted it really low, like if I’m getting paper I’m pretty much waving at whoever is in the stall next to me. So it’s awkward getting paper as it is, then you know how with new rolls you have to find the tag end and pull it to get it going? Well... I couldn’t find it. I tried and tried, and just couldn’t. I started getting desperate. I was tearing at the roll with no success and I had no idea what I was going to do.Enter the Climber.
I got the bright idea to use the small blade to just cut across the roll and then pull at the separated layer and it worked! I got that roll going and was able to leave that stall nice and clean! SAK saves the day!
No picture of the incident for obvious reasons, but here is the blade that saved the day!

Sent from my iPhone using Tapatalk
...that's a good one Manny

-
Opened a closet door ... the latch bolt seems to have disconnected from the internal mechanism?


-
Great use

-
Needed the sak for a few bends and tweaks to finish captain nemo's nautilus, all from that flat piece you see there,,
Time for a new one,,

-
@ElevenBlade said:
Opened a closet door ... the latch bolt seems to have disconnected from the internal mechanism?
Nice

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


