Leatherman FREE T4 vs Victorinox Pioneer X and Super Tinker
-
@smiller43147 said:
I understand your point on the OH and locking, but in those areas where either or both of those features are illegal then you might as well just rate the whole T4 as a zero. Your mileage may vary.BTW I did give the Super Tinker a bonus half point for the small blade.
That's definitely a valid argument. See, In my head, I was just not giving the bonus half-point... not giving the whole thing a zero. Where I live, what I'm (potentially) doing with the MT makes a difference, as does what jurisdiction I am. If I have my car packed with camping gear I can carry different things than if I'm just roaming around running errands. (this is my laymans understanding of the laws) So when I tally pros and cons on my MTs SAKs etc, I have a line item for "legality if I inadvertently carry it". Case in point, my Victorinox One Hand Trekker - it gets all the boxes for all the things, except for that geographic versatility.
So in other words, I do apologize for derailing the proverbial train on which your rather well-designed comparison and review sits.
-
@ElevenBlade said:
As you enjoy New Years Eve, I wonder if you'll change your mind on the bottle opener, The space where you would catch the edge of the cap (where you fit the 1/4 inch bit) may be a bit small, and therefore fiddly on the cap.OSU football (vs Clemson) tonight (go Buckeyes) so you don't have to wait. The cap lifter worked just fine. Catches the edge just fine.
So did a Pioneer X. I suppose that means the two SAKs should get another point each..jpeg)
-
Great points everyone and very well thought out and interesting review Smiler. I say you all get 2 points for participation.

-
smiller43147, thanks for writing this comparison up, it's interesting to see them compared up close.
I was at Cabela's and REI last month, and had the opportunity to play with both T4 and K4. I had the feeling T4 was some kind of SAK iteration with OH and lock functions, but with penalty of heavier weight and larger size. I ended up walking away with the K4 which I think it's more interesting offering of the two.
-
@smiller43147 said:
OSU football (vs Clemson) tonight (go Buckeyes) so you don't have to wait. The cap lifter worked just fine. Catches the edge just fine.
So did a Pioneer X. I suppose that means the two SAKs should get another point each.
-
I have to ask, is the T4 an answer to a question that no one had asked?
-
@ElevenBlade said:
I think the LM Signal was the answer to a question that nobody had asked. They invented an excellent backup outdoor MTI do think that people ask for a good knife based MT.
I was hinting to the fact that the T4 is trying to be something that is already well covered by Victorinox. There isn't really a gap in the market for it.
-
@ElevenBlade said:
I think the LM Signal was the answer to a question that nobody had asked. They invented an excellent backup outdoor MTI do think that people ask for a good knife based MT.
Good point.
Are there any besides the Spyderench tools??
And even those aren't available on every street corner. -
The pocket clip on the T4 makes it the winner overall!
-
Even though SAKs are good tools, there is always room for improvement. So I appreciate LM‘s attempt to step out of their comfort zone and try something new. I also get that on your first try you don‘t get it all right.
The issue for me is, that the tools they delivered are questionable at best.It feels like the T4 was designed by a hipster that used a hammer once in his life. Now he thinks he can design a tool. It doesn‘t feel like people that use MT‘s everyday had any say in the outcome. Bulky design, plastic inserts, ridiculous short file that cannot decide if it wants to be a nail file or metal / wood file, an awl that with a screwdriver tip ( ??? ), scissors that „hang up“ during continues cutting, and so on.
It just feels like it could have used another year of R&D, but someone decided to throw it in the market, slap a price on that is nowhere justified and see what happens. The T4 costs $60 on LM‘s website. For that amount I can get an Evo S557, a Deluxe Tinker (-$10), or a Ranger (-$7). All of which have far more tools and utility. Heck, for $10 more you can get a Rebar!

LM, I had such high hopes for the T series. What happened?

-
@SirVicaLot said:
I can only hope that was :sarcasm:
It is not!
Enjoy! -
Play nice fellas !
-
Sorry Steve, didn‘t mean to cause trouble! :-\

-
I agree with SirVicaLot.
I would even go as far as saying Sidekick/Wingman is a better value at $60. But rebar for $10 more would also be wise.
I paid $70 for my Swisschamp and that would put poor T4 to shame.
-
Thank you for the objective comparison, smiller! Very well stated and thought out.
I think the scores are about where they should be by experience with the three tools in hand/use.

Sure, I could input personal preference if I wanted, but it wouldn't make sense, because I own(and use) too many of so many different brands (and to a larger extent models) of tools. A tool isn't bad, because it isn't exactly what someone has gotten used to and become fond of.
Side note:
If legality is an issue, then create a separate thread grading the tools based off of that criteria and your personal experience using each tool(where it can be legally done so).
/Pocket clips, tool steel(which drivers strip easier under torque/damage the frame/etc), locking mechanism(this is an important safety feature many people would not go without if legality weren't an issue), position of drivers(short t-handle/non-locking inline/locking inline), construction(brass pins/bushings or sex bolts), one-hand vs. two hand deployment, etc are all important factors that cannot be dismissed as advantages(or on the flip-side; disadvantages to some) to many users.
Price-wise? They're close enough not to make that a serious consideration <u>in my opinion</u>. I spend $10 a day on coffee and lunch. But, to each their own. Fact is US manufacturing just costs more in general. Why do you think most good watch brands are made(at least 51% anyway) in Switzerland? Could Tag Heuer make the same watch in the US for the same price? No, so why expect the MultiTool industry to be exempt.
Anyway. That's my $0.02. Nothing personal.
-
@gerleatherberman said:
Thank you for the objective comparison, smiller! Very well stated and thought out.I think the scores are about where they should be by experience with the three tools in hand/use.

Sure, I could input personal preference if I wanted, but it wouldn't make sense, because I own(and use) too many of so many different brands (and to a larger extent models) of tools. A tool isn't bad, because it isn't exactly what someone has gotten used to and become fond of.
Side note:
If legality is an issue, then create a separate thread grading the tools based off of that criteria and your personal experience using each tool(where it can be legally done so).
/Pocket clips, tool steel(which drivers strip easier under torque/damage the frame/etc), locking mechanism(this is an important safety feature many people would not go without if legality weren't an issue), position of drivers(short t-handle/non-locking inline/locking inline), construction(brass pins/bushings or sex bolts), one-hand vs. two hand deployment, etc are all important factors that cannot be dismissed as advantages(or on the flip-side; disadvantages to some) to many users.
Price-wise? They're close enough not to make that a serious consideration <u>in my opinion</u>. I spend $10 a day on coffee and lunch. But, to each their own. Fact is US manufacturing just costs more in general. Why do you think most good watch brands are made(at least 51% anyway) in Switzerland? Could Tag Heuer make the same watch in the US for the same price? No, so why expect the MultiTool industry to be exempt.
Anyway. That's my $0.02. Nothing personal.
I'd guess that the general cost of Swiss manufacture is considerably higher than US manufacture and for good reason. My own experience is that I'd prefer to pay the extra and am delighted when I get that quality for less (SAK). I've not been impressed by US manufactured quality and am certainly not willing to pay any extra for it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

