ZapWizard's Leatherman Free P4 Mods
-
Awesome ideas popping up here

Looking forward to the test results on the prototype t shank holder

-
@JC said:
I noticed the two other tools on the double T-shank side appear to be file and awl. That means max tool space between two T-Shank holders is .130?Actually 0.12", (I just made that mock-up image quickly). So you would only be able to keep the Awl, and Ruler if you wanted two T-Shanks on the same side.
I actually can't make the T-Shank any thinner, as the material has to be at least 1.2mm at the thinnest areas to be manufactured reliably.
In either case I have ordered my prototype, but it probably won't arrive for a month. -
@ZapWizard said:
You can't glue anything to that little arm, it is the spring for the scissors to return. It also has a slight bend in it for tension. (Visible from the side)I don't want to glue it on the little arm. Since I want to move the scissors to the other of the same handle (see picture), that little arm, which act as a thumb pad for opening, would be facing the "interior" and no longer be accessible. That's why I'd glue a thumb pad on the other side of the tool (see picture).
@ZapWizard said:
Epoxy would release from the steel.That's what I was afraid of. Metal is probably too smooth.
@ZapWizard said:
The best option would be to drill one or two small holes into the space between the arm and the scale. They would need to be closer to the scale, as the spring arm actually moves into to this area when deployed.If you tapped the holes, you could attach a small thumb tab with some set-screws My P4 thumb-tabs are too big for this, but the upcoming T2/T4 Thumb-tabs may work in that space. I can post a image of what I am thinking if you want.
I'd rather not temper with the tool to the point I void the warranty.

-
First of all. I really like your mods and will probably end up buying a lot of them. Especially looking forward to be able to use the diamond coated file with the P4.
When I found this thread I started to dig thru some older Leatherman stuff and found this.
Still works very well.
-
@Foozebar said:
First of all. I really like your mods and will probably end up buying a lot of them. Especially looking forward to be able to use the diamond coated file with the P4.When I found this thread I started to dig thru some older Leatherman stuff and found this.
Still works very well.Great post and photos!

-

Now for being able to finally lay my hands on a Universal Tool Adapter over here. Rarer than hens' teeth... ::)
-
Welcome to
fooze 
I also have found it difficult to find the Universal Adapter here in the States as well :ahhh
Hopefully we can both find one, DT 
-
Howdy Folks. It is Shapeways delivery day. :woohoo:
I received the thumb tabs for the FREE T2 & T4, as well as the Surge. Both are products folks have requested here, as well as on YouTube.
I also had to order a new Surge holster as the design needed to be updated to fit the tabs.
All the parts came out great, no changes required.I recorded a few sets of videos for these, but for some reason they both had no audio. ??? Which sucked as I super-glued the thumb tabs into place. :think:
So this forced me to put up to shut up, and actually go though the super-glue removal processes I recommend but haven't tested on these actual parts.And then.....my video of the glue removal process was "recorded' during a time where I forgot to actually press the record button. :facepalm:
So tomorrow I will re-record that video tomorrow. The good news is the removal process worked. -
Hello again.
Not my intent to highjack this thread, but I'm not allowed to send PM's yet.
How about an updated version of the removable bit driver..?
Here's the old one flanked by my trusty old workhorse.
A 1:st gen Surge with tools from a Core.Such an adapter might fit all the Free models (P, T & K) and not void any warranties. :D
-
@ZapWizard said:
Howdy Folks. It is Shapeways delivery day.
I received the thumb tabs for the FREE T2 & T4, as well as the Surge. Both are products folks have requested here, as well as on YouTube.
I also had to order a new Surge holster as the design needed to be updated to fit the tabs.
All the parts came out great, no changes required.I recorded a few sets of videos for these, but for some reason they both had no audio. ??? Which sucked as I super-glued the thumb tabs into place.

So this forced me to put up to shut up, and actually go though the super-glue removal processes I recommend but haven't tested on these actual parts.And then.....my video of the glue removal process was "recorded' during a time where I forgot to actually press the record button.

So tomorrow I will re-record that video tomorrow. The good news is the removal process worked.Nice

-
Not my intent to highjack this thread, but I'm not allowed to send PM's yet.
How about an updated version of the removable bit driver..?
Here's the old one flanked by my trusty old workhorse.
A 1:st gen Surge with tools from a Core.Such an adapter might fit all the Free models (P, T & K) and not void any warranties. :D
Nice Surge

-
@Foozebar said:
How about an updated version of the removable bit driver..?
Such an adapter might fit all the Free models (P, T & K) and not void any warranties. :DThis was actually my first idea for the FREE series. I even ordered that bit adapter to see if it would work on the FREE Philips driver with an easy mod or shims.
I haven't revisited the idea though, I will take another look. The catch though is that they use a spring clip or a spring-loaded ball (I forget which) as a retainer for the bits. I could use magnets to retain the bits, or some side grips like the flat bit holder. -
Now for being able to finally lay my hands on a Universal Tool Adapter over here. Rarer than hens' teeth... ::)
@Poncho65 said:
Welcome to
fooze 
I also have found it difficult to find the Universal Adapter here in the States as well :ahhh
Hopefully we can both find one, DT 
I don’t mean to sound condescending, but have y’all checked eBay?
I just popped over to search “Leatherman universal tool adapter” and boom.
Lots of listings.
Some even come with a cool case, a leather holster, and even a Leatherman multitool!!!
The variety is mixed, but I’ve seen some listed with SuperTools, Waves, Rebars, Surges, etc...and some are vintage models!
Anywho...worth a shot!
Many of them seemed to be in the US, but I caught one or two that had €Euros listed as the currency...
-
The problem with ebay auctions in the US is that the ebay policy tends to exclude shipping to Europe for anything to do with multitools and knives...
-
@hbcorpse said:
I don’t mean to sound condescending, but have y’all checked eBay?I just popped over to search “Leatherman universal tool adapter” and boom.
Lots of listings.
Some even come with a cool case, a leather holster, and even a Leatherman multitool!!!
The variety is mixed, but I’ve seen some listed with SuperTools, Waves, Rebars, Surges, etc...and some are vintage models!
Anywho...worth a shot!
Many of them seemed to be in the US, but I caught one or two that had €Euros listed as the currency...
I guess I should correct my statement
I find it difficult to find one for the price I am willing or able to pay
:D Lots of time they say universal and end up being the standard adapter as well 
-
@Poncho65 said:
I guess I should correct my statement
I find it difficult to find one for the price I am willing or able to pay
:D Lots of time they say universal and end up being the standard adapter as well 
Wait...there’s a “standard” adapter, as well as a universal adapter?
I just bought one on eBay...hope it arrives.





I also hope, that this is the one that will fit my Free P4...as pictured above!
-
Very nice...I think I saw 2 on the eBay - one kinda affordable and the other was at $100 IIRC
Your’s looks great!
-
-
For the third time I recorded a video on how to remove the glued thumb tabs. This time I tested the audio with a test clip, but it still cut out after about a minute. I'll figure out why somehow.
So this is my first crack at trying to narrate, which I hate doing.The good news is that I have validated three times over that both the acetone and heat-gun methods work at removing super-glued thumb tabs from the blades. Other than a bit of color loss on the acetone method, there is no damage to the actual thumb tabs. If you were fearful of gluing something to your precious multitool, don't worry.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D