ZapWizard's Leatherman Free P4 Mods
-
For the third time I recorded a video on how to remove the glued thumb tabs. This time I tested the audio with a test clip, but it still cut out after about a minute. I'll figure out why somehow.
So this is my first crack at trying to narrate, which I hate doing.The good news is that I have validated three times over that both the acetone and heat-gun methods work at removing super-glued thumb tabs from the blades. Other than a bit of color loss on the acetone method, there is no damage to the actual thumb tabs. If you were fearful of gluing something to your precious multitool, don't worry.
-
-
@SteveC said:
Yours is the original adapter not the universal one.@Poncho65 said:
The Universal is one that I can never find for a decent price
but I have 2 of the Standard one
:DHang on...so what’s the difference, other than in name (obviously)...?
The Universal’s name seems self explanatory...
But what is the Standard?
That’s the one I bought?
I’m guessing it will only fit specific models?
———————————
EDIT:
Ok, I’ve done quite a bit of web-sleuthing since I posted this.I’ve found that the one I bought on eBay is the Original/Standard.
So...that one Universal model on eBay?
Should be here in the next two weeks.
I couldn’t help myself.
I DID find a good picture of an OG adapter that someone had modified to “work” universally, but did not watch the YouTube video it came from.

So, now, it seems I’ll have one of each.
I’m hoping the Universal one will fit in the caddy of the OG one...I’d really like to carry it in that caddy.
Anyway...just figured I’d edit/update my earlier post (which probably wasn’t even seen by many, if any).
Thanks a lot, to the group.
Y’all have had me spending more money on stuff than I ever planned on!
-
Not my intent to highjack this thread, but I'm not allowed to send PM's yet.
How about an updated version of the removable bit driver..?
Here's the old one flanked by my trusty old workhorse.
A 1:st gen Surge with tools from a Core.Such an adapter might fit all the Free models (P, T & K) and not void any warranties. :D
@ZapWizard said:
This was actually my first idea for the FREE series. I even ordered that bit adapter to see if it would work on the FREE Philips driver with an easy mod or shims.
I haven't revisited the idea though, I will take another look. The catch though is that they use a spring clip or a spring-loaded ball (I forget which) as a retainer for the bits. I could use magnets to retain the bits, or some side grips like the flat bit holder.I came across this picture...says it’s a 1/4” socket, and is friction fit on there, with the Phillips head and Prybar tools in use.
No further info.

Thanks Reddit!
Seems like a good work-around.
-
@hbcorpse said:
Hang on...so what’s the difference, other than in name (obviously)...?The Universal’s name seems self explanatory...
But what is the Standard?
That’s the one I bought?
I’m guessing it will only fit specific models?
———————————
EDIT:
Ok, I’ve done quite a bit of web-sleuthing since I posted this.I’ve found that the one I bought on eBay is the Original/Standard.
So...that one Universal model on eBay?
Should be here in the next two weeks.
I couldn’t help myself.
I DID find a good picture of an OG adapter that someone had modified to “work” universally, but did not watch the YouTube video it came from.

So, now, it seems I’ll have one of each.
I’m hoping the Universal one will fit in the caddy of the OG one...I’d really like to carry it in that caddy.
Anyway...just figured I’d edit/update my earlier post (which probably wasn’t even seen by many, if any).
Thanks a lot, to the group.
Y’all have had me spending more money on stuff than I ever planned on!
Yep that little tab is about the main difference that I can find with the 2 different models (and I guess those 2 rivets as well
)
Glad we can help you spend your money

Excited for you that you have a Universal one on the way

-


Well I received prototype #3 for the T-Shank holder. I made a video showing all the things i did to the prototype.
The good news is that when deployed the T-Shank blade is held rock solid. Granted I had to do lots of careful grinding, This was annoying since I used the same "perfect fit" profile as Rev 2.
The set-screws work great to hold the different thicknesses of blades, however they also push the two halves apart. Effectively jamming the T-shank when closed.
The dove-tail feature works to limit the distance, but the small (0.2mm) of tolerance I had between the surfaces, combined with the shrinkage of the sintered part amplifies the effect.A secondary effect of this is that the blade end up a bit too close to the pliers when closed, so it doesn't close one-handed, you have to push the blade out of the way first.
I am going to live with the prototype for a while, I think I have to figure out how to change from a expansion method, to a clamping method to hold the different blade thicknesses. I have a few ideas on that brewing.
So not ready for prime time yet, but its getting there. -
Looking good so far
can't wait til you get the kinks worked out with different blade thicknesses

-
Really (not) looking forward to when LM “steals” your ideas and implements these in a future Free P4 design...
I’d rather carry your innovations on my belt, but let’s face it...you’ve given them a HUGE head start in creating their own versions of these mods.
But, then again, who’s to say they didn’t run through their own iterations of these components, and decide against them for some reason(s)?
After all, whether they’re the end-all-be-all of multitools or not, they’ve got a lot of brain power behind the decision(s) to make things the way they do.
In then, as I said, I’d rather carry a ZapWizard modded tool on my belt, as I really believe in your work and your scientific approach to completing these ideas.
-
@hbcorpse, I appreciate the nice words. I hope they come to me first. I do bed they had a few unfinished ideas on the table for the FREE series. They can do quite a bit considering the simpler locking mechanism.



I have worked out a clamping design. The screws are off to the side, but the whole assembly is so small it hopefully will end up working to hold the T-Shank securely.
The two M2 screws, with a tensile strength of 170,000 psi. If I did my math right: That is around 530lbs of tensile strength per screw. :o
The 60% 420SS / 40% Bronze composite has a yield strength of 62 ksi, so it will probably fail before the screws does, but there should be more than enough strength to clamp a blade.
I added four tiny dots to the inside of the clamp, as well as a small arc. These hopefully will increase local pressure on the blade.You can change thin blades on this without removing the screws entirely, but thick blades will probably require full disassembly.
I will think on this design for a bit before ordering a prototype. I appreciate the input from the folks here.
-

Clever idea to use the thumb space for the screws

I'm a bit of two minds over this: this will work nicely and should be very stable, but it's a pity you need another tool for blade replacement - even if the Allen key (2mm too, right?) is nicely integrated, you might lose it. On a MT it would still be preferable not to have to use separate tools... the dovetail construction on your other variant looked promising but I can imagine that 3D printing will not bring the required precision fit unless you allow for extra material and expect the user to finish the fit.
-
Ok all...
The Standard and Universal Tool Adapters showed up!
As discussed, the Standard does not fit in any of my devices...Surge, Wave+, Free P4...yes that’s all I have! Don’t judge my teensy collection! At least I’ve got more UTA’s than you! Hahaha I’m kidding.
Anywho...I can now start working on designs for my EDC holster.
Plan is to carry:
- Free P4 (modded with ZW flat bit adapter)
- UTA
- bit extender
- flat bit set
- mini Craftsman ratchet
- Streamlight Micro-USB
- firestarter tool
I will keep y’all updated as things (SLOOOWLY) progress...
Oh yeah...I craft leather goods. Forgot I hadn’t mentioned that.
Now I’ve got a bug in my ear telling me I need a Crunch...and many reasons why I should have it.
Anyone here have one?
Also, for those of you who have been collecting LM gear the longest...what are the odds they release some new-tangled version of the Crunch, since the Free P4 has sorta launched a new generation of LM multitools...?
I know that’s like trying to guess how many jelly beans are in a jar, but I just figured I wouldn’t want to buy a current generation Crunch, and get an email about the new version tomorrow...
-
I carried a Crunch for years, loved it...gifted it to my son and when I bought him a Signal - his choice - he gifted the Crunch to my grandson!
Wspeed carries a Crunch so he will be chiming in a couple of hours
-
I have a Crunch as well
along with a few others here /topic/10261
;)Can't wait to hear and see what all mods you do, hb
Those are some great tools that you have as well 
Also post some pics of the 2 different adapters if you have time

-
@hbcorpse said:
I know that’s like trying to guess how many jelly beans are in a jar, but I just figured I wouldn’t want to buy a current generation Crunch, and get an email about the new version tomorrow...The crunch is beautifully designed and still does it job how it is supposed to. And it isn't a tool usable for everyone. I would like it a lot but I'm afraid a new crunch won't happen.
You could ask Megan. She is at SHOT show and there should be some people from Leatherman there. Maybe she can get something out of them. (crunch clamped on their fingers and slowly tighten it maybe? Just an idea)
Sent from my ONEPLUS A3003 using Tapatalk
-
Thank you all for your responses!
@Rapidray said:
I carried a Crunch for years, loved it...gifted it to my son and when I bought him a Signal - his choice - he gifted the Crunch to my grandson!
Wspeed carries a Crunch so he will be chiming in a couple of hours
So awesome to see LM tools (and tools in general) being passed down through generations!
I’ll keep an eye out for Wspeed’s answer!
@Poncho65 said:
I have a Crunch as well
along with a few others here /topic/10261
;)Can't wait to hear and see what all mods you do, hb
Those are some great tools that you have as well 
Also post some pics of the 2 different adapters if you have time

As far as mods to my P4, I think I’m all set with the FlatBit addition, as that’s the biggest thing I was missing from using my Wave+.
However, I’m sure ZapWizard is NOT done yet, and I know LM isn’t done making tools yet...so we shall see!
I’ll gets some pics of my holster when I start building it (and along the ways).
And I will get y’all some pictures of the different adapters, side by side!
@jorritvS said:
The crunch is beautifully designed and still does it job how it is supposed to. And it isn't a tool usable for everyone. I would like it a lot but I'm afraid a new crunch won't happen.You could ask Megan. She is at SHOT show and there should be some people from Leatherman there. Maybe she can get something out of them. (crunch clamped on their fingers and slowly tighten it maybe? Just an idea)
Sent from my ONEPLUS A3003 using Tapatalk
I figured the Crunch was built about as good as it could ever be...but I just have this small nagging feeling that they might make a newer Free-Gen Crunch...
I guess it doesn’t matter, cuz I’ll likely end up owning the current gen, and I wouldn’t pass up a Free-Gen either!
Who is Megan? I haven’t been here long, so there are many folks I still haven’t seen post.
Thanks again for all the response!
P.S. Sorry if I post/talk a lot. I’m on some other online forums, and I use an app called TapaTalk (it kinda sucks) to manage all my forum interactions in one place...so I’m very active with seeing posts on this thread.
-
Trust me you don't talk as much as me
Our mobile site running the Sunrise theme is so much better than Tapatalk, so think about using that instead 
Megan is our marketing person for social media amonst other things and also Grant's (our site owner) significant other
She was at SHOT 2020 this year for us as well and we got a great firsthand look at several new things from several companies 
-
@Happy Gilmore said:
Horizontal holster would be my jam as well, your almost my singluar driving reason to consider the P4 at this point lol.- I’ll admit, I’m a big ol’ fatty. My love handles make vertical carry uncomfortable.
@Happy Gilmore said:
Love it, any chance of a horizontal holster version?

After another request from a Shapeways customer; I finally designed the horizontal carry option for the FREE P2 and P4.
It doesn't have any extra bit/extender options, as no matter what I did they just didn't fit well. Also only one belt size, as I don't trust an open clip on a larger duty style belt.
Now available in both Left or Right carry. -

Just a few thoughts...
- Would a metal belt clip be an option...?
- ... and would this not make a bit extender slot a possible add-on option too...?
Just asking...

-

After another request from a Shapeways customer; I finally designed the horizontal carry option for the FREE P2 and P4.
It doesn't have any extra bit/extender options, as no matter what I did they just didn't fit well. Also only one belt size, as I don't trust an open clip on a larger duty style belt.
Now available in both Left or Right carry.Lordy Lordy, mercy me!
That is beautiful!
Three questions come to mind, immediately, because let’s face it...that’s how we work!
-
- What size belt did you design this for? My eyes tell me, based on dimensions, that it will fit perfectly on a 1.5” belt. Which is my standard.
——————————————————————
Now available in both Left or Right carry.
-
- Does this mean I can go spend money right now?!?
——————————————————————
-
- Now that you’ve “conquered” this “demon” do you think you’ll design this style for the Wave+ and Surge? :selfish:
Thank you, once again, and always!
If I had the brainpower, and/or the means, I still wouldn’t be able to create/design the wonders you’ve bestowed upon us!
I grovel at your throne, Lord ZapWizard!
HUZZAH!
P.S. I may, or may not, have achieved a “Val Kilmer as Doc Holliday in Tombstone circa 1994” level of drunken-ness...
You decide. Don’t be fooled by my literate typing.
]^{]^{£^{7£{7]{|]{]|
Hahghagjhskgukxgoux
(#*’hgkhsfhghkggljshljsjbkjHint...I DID / AM that drunk. I am, indeed, your Huckleberry.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login