Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

ZapWizard's Leatherman Free P4 Mods

Scheduled Pinned Locked Moved Leatherman Tools
513 Posts 1 Posters 158.5k Views
  1. Home
  2. Tool Talk
  3. Leatherman Tools
  4. ZapWizard's Leatherman Free P4 Mods
ZapWizard's Leatherman Free P4 Mods
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Huntsman Offline
    Huntsman
    Global Moderators
    Posts: 5,781
    Huntsman Offline
    Huntsman
    Global Moderators
    wrote on last edited by
    #176 Quote Reply

      :nothingtoadd:

      1 Reply Last reply
      • Dutch_Tooler Offline
        Dutch_Tooler
        Posts: 4,434
        Dutch_Tooler Offline
        Dutch_Tooler
        wrote on last edited by
        #177 Quote Reply

          @Matpar_McWolfie said:
          ...

          Regarding the t-shank thickness issue:So that circular nub would go on the orange part, if you refer to Zap's post above? Would make sense to me. It would greatly reduce the thickness needed on the other side's "springy arm".

          ...

          Yup, that's where it would go, thanks for prompting the clarification :tu:

          1 Reply Last reply
          • ZapWizard Offline
            ZapWizard
            Posts: 171
            ZapWizard Offline
            ZapWizard
            wrote on last edited by
            #178 Quote Reply

              The flat bit driver is now available to purchase.
              Video:
              https://www.youtube.com/watch?v=HYbHVKSohms

              The holster for the FREE P2 is also available:
              https://www.youtube.com/watch?v=DPiL9JhfnAg

              And the FREE P2 and P3 bit-holder holsters are also now available. 4mm, Flat, and Flat with Bit extender options.

              Finally, the holster for the ST300 is also ready
              https://www.youtube.com/watch?v=2mSGhriP1ak

              Shop link in my signature below.

              1 Reply Last reply
              • Wspeed Offline
                Wspeed
                Posts: 76,225
                Wspeed Offline
                Wspeed
                wrote on last edited by
                #179 Quote Reply

                  Very nice :dd: :like:

                  1 Reply Last reply
                  • Dutch_Tooler Offline
                    Dutch_Tooler
                    Posts: 4,434
                    Dutch_Tooler Offline
                    Dutch_Tooler
                    wrote on last edited by
                    #180 Quote Reply

                      :like: :drool:

                      1 Reply Last reply
                      • Outback in Idaho Offline
                        Outback in Idaho
                        Posts: 5,432
                        Outback in Idaho Offline
                        Outback in Idaho
                        wrote on last edited by
                        #181 Quote Reply

                          @ZapWizard said:
                          The flat bit driver is now available to purchase.
                          Video:

                          The holster for the FREE P2 is also available:

                          And the FREE P2 and P3 bit-holder holsters are also now available. 4mm, Flat, and Flat with Bit extender options.

                          Finally, the holster for the ST300 is also ready

                          Shop link in my signature below.

                          So impressed would consider getting one of these series, along with your mods and accessories! Awesome stuff. :o

                          1 Reply Last reply
                          • Poncho65 Offline
                            Poncho65
                            Global Moderators
                            Posts: 88,523
                            Poncho65 Offline
                            Poncho65
                            Global Moderators
                            wrote on last edited by
                            #182 Quote Reply

                              Very nice job, Zap :dd: and love the sheaths :like:

                              Also welcome to :MTO: Matpar :cheers:

                              1 Reply Last reply
                              • hbcorpse Offline
                                hbcorpse
                                Posts: 18
                                hbcorpse Offline
                                hbcorpse
                                wrote on last edited by
                                #183 Quote Reply

                                  Hello all!

                                  Long time lurker, and just registered today!

                                  I have been obsessing over your work, ZapWizard, since this thread was born.

                                  The LM FlatBit system is a must-have for my needs, and I was sad to see the Free P4 did not have it. That left me torn between carrying dad’s old Wave+ and my shiny new P4...I opted for the P4 as my EDC.

                                  Then I discovered your work, and the rest is history.

                                  My FlatBit driver and Thumb Tabs are in processing from ShapeWays, as of last Friday! Anxiously awaiting their arrival!

                                  I know I’m new here, but I have two burning questions that I could no longer resist asking:

                                  **1. Have you figured out the torque specs for the Chicago screw pivots that hold the small tools (and soon my ZW FlatBit driver) in place? **

                                  • Contact with LM reveals that it’s a proprietary spec, which they wouldn’t share. - I’d really like to get this tool back to factory specs when I’m done installing my mod, even though I know my warranty will be out the window.

                                  2. Do you have any plans for a horizontal version of the holster for the P4?

                                  • I’ll admit, I’m a big ol’ fatty. My love handles make vertical carry uncomfortable.
                                  • I also, however, dabble in the art of leatherwork...And I’ve been mentally designing a horizontal EDC pouch for the P4, a FlatBit caddy, the FlatBit extender, and a small Craftsman ratchet.

                                  Sorry for the short novel here. Just really excited to receive my items, and to be able to communicate with a veritable “god of mod”...and, of course, all the members here!

                                  Also, sorry for lurking so long!

                                  I hope I can bring some value to this forum / thread!

                                  1 Reply Last reply
                                  • ZapWizard Offline
                                    ZapWizard
                                    Posts: 171
                                    ZapWizard Offline
                                    ZapWizard
                                    wrote on last edited by
                                    #184 Quote Reply

                                      @hbcorpse said:
                                      Long time lurker, and just registered today!

                                      Thanks for the compliments, and welcome. Don't worry I lurked here for years before I finally made a post.

                                      I have a torque meter at work that I can borrow to measure the existing torque on those screws. My P4 has been taken apart, but I have only messed with one screw on my P2. So In theory, I can use the torque wrench to measure how much it takes before they tighten/loosen to see what the existing torque is. But then to repeat that you need a torque wrench anyways.

                                      In reality you can do this just by hand like I do in my videos. You get a feel for the tension and adjust it looser/tighter.

                                      This has been requested a few times, and I have put some thought into it. It probably would have to be done as an open loop. I may take another crack at the design soon, now that I know the open loop is stronger than I expected.
                                      The catch is it wouldn't hold any bits, as they would be shoved up against the belt. I have been thinking of making a stand-along bit holder for the flat bits, something that could be removed from the belt and used as a handle on the extender.

                                      1 Reply Last reply
                                      • Happy Gilmore Offline
                                        Happy Gilmore
                                        Posts: 1,065
                                        Happy Gilmore Offline
                                        Happy Gilmore
                                        wrote on last edited by
                                        #185 Quote Reply

                                          @ZapWizard said:
                                          Thanks for the compliments, and welcome. Don't worry I lurked here for years before I finally made a post.

                                          I have a torque meter at work that I can borrow to measure the existing torque on those screws. My P4 has been taken apart, but I have only messed with one screw on my P2. So In theory, I can use the torque wrench to measure how much it takes before they tighten/loosen to see what the existing torque is. But then to repeat that you need a torque wrench anyways.

                                          In reality you can do this just by hand like I do in my videos. You get a feel for the tension and adjust it looser/tighter.

                                          This has been requested a few times, and I have put some thought into it. It probably would have to be done as an open loop. I may take another crack at the design soon, now that I know the open loop is stronger than I expected.
                                          The catch is it wouldn't hold any bits, as they would be shoved up against the belt. I have been thinking of making a stand-along bit holder for the flat bits, something that could be removed from the belt and used as a handle on the extender.

                                          Horizontal holster would be my jam as well, your almost my singluar driving reason to consider the P4 at this point lol.

                                          1 Reply Last reply
                                          • BePrepared Offline
                                            BePrepared
                                            Posts: 418
                                            BePrepared Offline
                                            BePrepared
                                            wrote on last edited by
                                            #186 Quote Reply

                                              This is just amazing work! :tu: :like: :cheers:

                                              1 Reply Last reply
                                              • Dutch_Tooler Offline
                                                Dutch_Tooler
                                                Posts: 4,434
                                                Dutch_Tooler Offline
                                                Dutch_Tooler
                                                wrote on last edited by
                                                #187 Quote Reply

                                                  :bump:

                                                  @Dutch_Tooler said:
                                                  I've only seen the video and not listened to it, so haven't followed the comments and I'm not sure whether you covered this:

                                                  On the topic of making the Surge blades fit, would it be an option to make the shank cavity to the depth of the LM shank, with the exception of a circular nub at the position of the hole in the LM shank that locally restricts the cavity depth to the thickness of a Bosch shank *)? Maybe that is sufficient to hold both types. Possibly in combination with a spring with a larger contact area on the shank...

                                                  Just thinking :dunno:

                                                  *) Edit: maybe just one of the Bosch thicknesses... 1.25?

                                                  Just curious whether you've had time to consider this Zap?

                                                  1 Reply Last reply
                                                  • ZapWizard Offline
                                                    ZapWizard
                                                    Posts: 171
                                                    ZapWizard Offline
                                                    ZapWizard
                                                    wrote on last edited by
                                                    #188 Quote Reply

                                                      @Dutch_Tooler said:
                                                      Just curious whether you've had time to consider this Zap?

                                                      I guess I missed that post, sorry. There isn't enough room for multiple cutouts. However, I did work on redesigning the t-shank. The first thing I tried was multiple cutouts for multiple thicknesses, and the tolerances are just too small. (0.25mm steps). I then tried to figure out how to get a stainless steel spring into the design. Something like McMaster 9716K360. There was just no way to hold a off the shelf tiny spring, and I am not ready to start making custom springs.

                                                      Here is the design I came up with, and ordered prototypes for just earlier today.
                                                      It uses a two halves, one of Steel, and the other Nylon. The steel part has the T-Shank cutout, 1mm deep on one side (Sliding side), and 2mm deep on the other side. All of the back and forth cutting torque should end up on the steel part. Some sideways torque might flex the nylon part, but it should spring right back.

                                                      The nylon half has a spring-loaded arm. The arm is set to hold a bit of force on a 1mm blade, but accommodate up to a 2mm blade. The spring arm is hinged on one side, and has a stop on the other side to prevent if from moving too far.
                                                      Two dove tailed areas lock the two parts together upon closing, hopefully ensuring the nylon doesn't just bend apart. I have no idea if will work until I get the prototypes.

                                                      1 Reply Last reply
                                                      • fullbreakfast Offline
                                                        fullbreakfast
                                                        Posts: 924
                                                        fullbreakfast Offline
                                                        fullbreakfast
                                                        wrote on last edited by
                                                        #189 Quote Reply

                                                          I don’t really have anything to add to this thread other than saying that it’s indescribably awesome and ZapWizard is a legend.

                                                          1 Reply Last reply
                                                          • Dutch_Tooler Offline
                                                            Dutch_Tooler
                                                            Posts: 4,434
                                                            Dutch_Tooler Offline
                                                            Dutch_Tooler
                                                            wrote on last edited by
                                                            #190 Quote Reply

                                                              :iagree:

                                                              @ZapWizard: that looks like it should work. The spring acts to close the lower left dovetail in the pic - nice touch!

                                                              BTW, what I was suggesting was not a multiple cutout - just a single one, but with a circular nub protruding from the cutout's bottom, in size and position to fall just inside the hole in the LM T-shank, while other thinner T-shanks (Bosch et al. - these lack holes) lie on top of the nub. The nub might also be sprung, come to think of it.

                                                              1 Reply Last reply
                                                              • Dutch_Tooler Offline
                                                                Dutch_Tooler
                                                                Posts: 4,434
                                                                Dutch_Tooler Offline
                                                                Dutch_Tooler
                                                                wrote on last edited by Dutch_Tooler
                                                                #191 Quote Reply

                                                                  Hmmm... the LM file and saw blade in your video appear to have a hole in the shank but those on the LM website don't...? I think I need to check that...

                                                                  Edit: mine has the hole, where the Phillip's head is pointing at... :think:

                                                                  9242019214138.jpg

                                                                  9242019214643.jpg

                                                                  1 Reply Last reply
                                                                  • ZapWizard Offline
                                                                    ZapWizard
                                                                    Posts: 171
                                                                    ZapWizard Offline
                                                                    ZapWizard
                                                                    wrote on last edited by
                                                                    #192 Quote Reply

                                                                      I don't want to rely on the hole being there, since most T-Shanks don't have it. I want to accommodate as many different blades as possible. Even massage balls :dunno:
                                                                      Grinding down the Leatherman to fit the Bosch is easily done, just any hand file will do it, and it is removing just about 0.1mm of material.

                                                                      1 Reply Last reply
                                                                      • Matpar_McWolfie Offline
                                                                        Matpar_McWolfie
                                                                        Posts: 10
                                                                        Matpar_McWolfie Offline
                                                                        Matpar_McWolfie
                                                                        wrote on last edited by
                                                                        #193 Quote Reply

                                                                          I get that but it would allow for a post to go through the LM blade, just as Duch_Tooler suggested. The post could squeeze the bosch blade into place, making it super stable, while allowing for the Leatherman blade to still fit.

                                                                          That being said, I think the latest iteration of your design allows for more blade thicknesses to fit. If it works, that is one hell of an engineering prowess! Can't wait to see and buy!

                                                                          Also, I was wondering if you saw that question?

                                                                          Hey Zap, on another topic, I was wondering if your blade tabs would be reversible? Let's say I'm a big goofy lefty (which I may or may not actually be), and I decided to switch the serrated and the straight blades so the latter is next to my left thumb when I hold the tool. I noticed that the hole egde is ever so sligthly sharper on one side than on the other. Would you tab fit on both sides of the blade so I can use them with my current configuration?

                                                                          1 Reply Last reply
                                                                          • Outback in Idaho Offline
                                                                            Outback in Idaho
                                                                            Posts: 5,432
                                                                            Outback in Idaho Offline
                                                                            Outback in Idaho
                                                                            wrote on last edited by
                                                                            #194 Quote Reply

                                                                              Think Leatherman used t-shank blades with holes to keep them inside their newer blade exchanger using a flat spring iirc. Seems that would keep blade options fairly limited, requiring a hole. Making an exchanger that does not require the hole would keep blade options more open. Ought to break away from their standards, make an exchanger for t-shank tools without the need for holes to hold them inside. :tu:

                                                                              1 Reply Last reply
                                                                              • Happy Gilmore Offline
                                                                                Happy Gilmore
                                                                                Posts: 1,065
                                                                                Happy Gilmore Offline
                                                                                Happy Gilmore
                                                                                wrote on last edited by
                                                                                #195 Quote Reply

                                                                                  @ZapWizard said:
                                                                                  I guess I missed that post, sorry. There isn't enough room for multiple cutouts. However, I did work on redesigning the t-shank. The first thing I tried was multiple cutouts for multiple thicknesses, and the tolerances are just too small. (0.25mm steps). I then tried to figure out how to get a stainless steel spring into the design. Something like McMaster 9716K360. There was just no way to hold a off the shelf tiny spring, and I am not ready to start making custom springs.

                                                                                  Here is the design I came up with, and ordered prototypes for just earlier today.
                                                                                  It uses a two halves, one of Steel, and the other Nylon. The steel part has the T-Shank cutout, 1mm deep on one side (Sliding side), and 2mm deep on the other side. All of the back and forth cutting torque should end up on the steel part. Some sideways torque might flex the nylon part, but it should spring right back.

                                                                                  The nylon half has a spring-loaded arm. The arm is set to hold a bit of force on a 1mm blade, but accommodate up to a 2mm blade. The spring arm is hinged on one side, and has a stop on the other side to prevent if from moving too far.
                                                                                  Two dove tailed areas lock the two parts together upon closing, hopefully ensuring the nylon doesn't just bend apart. I have no idea if will work until I get the prototypes.

                                                                                  Seriously...we are not worthy!

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 8
                                                                                  • 9
                                                                                  • 10
                                                                                  • 11
                                                                                  • 12
                                                                                  • 25
                                                                                  • 26
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. Leatherman Tools
                                                                                  4. ZapWizard's Leatherman Free P4 Mods
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0