Things are getting a bit quiet around here....
-
@comis said:
If we are going for the XL hanky/bandanna idea, may I suggest to have one side as 'show side'(pattern. motto, MTO signage, etc), while the other side may contain useful info? Such as some unit conversion table(mile <> km, oz <> g, cup <> oz, etc), Morse code, or suggestive use bandanna(impromptu water filter, arm sling, fuel, trail maker, pot holder, etc)Great idea, comis.

-
@comis said:
If we are going for the XL hanky/bandanna idea, may I suggest to have one side as 'show side'(pattern. motto, MTO signage, etc), while the other side may contain useful info? Such as some unit conversion table(mile <> km, oz <> g, cup <> oz, etc), Morse code, or suggestive use bandanna(impromptu water filter, arm sling, fuel, trail maker, pot holder, etc)i agree , great idea!
Gonna keep an eye on this thread.

-
@Nix said:
"Project" is a vague term. What do you mean? Planting 1000 trees? Getting a NASCAR vehicle on the track? Build a cabin in the woods? Sponsor a K9 rescue program?Yes. :D
Ideally the project would be something realistically do-able with the resources and budget we are likely able to have available, either through member generated funding or perhaps something like a Kickstarter campaign. But, I am good with it being a NASCAR or planting a thousand trees too- anything that MTO Members can do to leave their mark on the industry and/or world, and be proud of.
@SirVicaLot said:
Maybe Grant needs to share some of his ideas
:DWe'll get there. :D
Def
-
Great!
In that case, I'd encourage us to think about something that can be scaled down to local levels but have a unified theme. The tree-planting concept isn't as sexy as getting a Baja 1000 truck to cross the finish line, but it's something that would 1) be doable and permitted around the world, 2) can be done around the world as unified project, 3) make a positive impact on the world, and 4) is budget friendly (I think).
Buying the MTo island and building a visitor's cabin would, of course, be ideal. We'd need a good BBQ.
-
A nice little wooden tag with the MTo logo on one side and "planted by MTo" on the other side could be attached to each tree planted. Just so we'd get the props. :D
-
On that theme there are also benches than can be purchased for people sitting in areas. We have a lot here in my city that companies or individuals pay for. Trails and such I believe also do similar? One time cost in most cases.
-
I like the bandana idea. If not that, a limited edition Pioneer, Pioneer X, or Farmer would be awesome.
Myron
-
@comis said:
I had been subscribing to many popular EDC/gear related IG accounts online, and after seeing literally thousands of pocket dumps, I think what I see most is some kind of sheath or carrying method in most IG posts. Personally, I think there is a big gap in Metro's offering, especially in-pocket options, and that is why many makers have risen in recent years. I think in-pocket organizer will continue to grow since most major cities/countries around the world are becoming less and less knife friendly, and carrying a big knife on belt sheath may become less popular as time progressed.Right now the only two materials I see most often used for in-pocket organizer are condura and leather, and there is only one maker on Etsy is using sail mast which is ultra light weight and strong(but the design is average, and not too user friendly).
I am a big fan of sail mast because it is utterly weightless and thin, resilient, smooth(easy to pull/put gear back in) and breathable.
And about the new design:
What I like most about skinth/Metro offering is the 3d pocket, which is great for a regular folding knife(like BM griptilian) or a 3-4 layers SAK, but due to its smaller size, the options for pocket is limited, and it always rotate sideway in my cargo pants and render itself useless.

I love the larger size of Yellow Birch outfitters organizer, which naturally allows larger knife/tool to be carried. The slanted opening is brilliant and the field note pocket is great, since it will give structure to the whole organizer and keep it upright in the pocket. But their pocket is flat which really limits the carry of MT, and again only 2-3 pockets available.
Here are some current offerings from YBO:

I'd love to see is a lightweight sail mast in-pocket organizer which can host a field note at the very top middle compartment(which can keep the whole thing upright, especially in a cargo pocket), and one side with slanted, cascade of flat pockets in different sizes, while the other side with 2-3 slanted larger 3d pockets. So based on your tool selection of the day, you could have a wide variety of pockets to host them in.
I do like this idea. I have one of the Etsy paraglider material ones, which is the best I’ve found available to meet my needs but some improvements would be great. The paraglider/sailcloth is awesome because of it being lightweight and thin yet durable. A ripstop could also be nice and durable.
One of the faults with the current design is that although the height accommodates a CR123 flashlight and a 91mm SAK, it is really too short for a MT or 18650 flashlight or large single blade knife. Although, the Zipper pocket is nice, I can see where having the zipper go down the center like the yellow birch could be nice for easier access to what is in it.
Another aspect that could be nice if a solution was determined, would be an easy way to then attach to the belt without adding too much bulk. This would require both a belt attachment with loops or molle as well as a retention for the open pockets so the items would not fall out if moving around.
Another idea that could be real nice is a modular type of tool. A tool that could be easily modified as the situation required using a basic common driver. Something like how the LM Leap has the removable blade, the bladeless MP600 has the removable saw or even the KeyBar has tools that can be added. It would be great to be able to carry one tool that when you might have to enter a bladeless zone, you can easily remove the blade but then reinsert when done. If urban then file and bottle opener, but camping switch to firesteel and saw. Whether plier based or more SAK style, it could be nice to have the modularity that would require less knowledge and time to adapt to varying needs.

-
I'm not against another run of custom MTO knives from Victorinox, but I was looking to do something original, uniquely MTO. Anyone can rehash the same idea over and over again, paint it different colors and pretend it's something new, I'd like to see if we can actually come up with something new, because we are better than that. :D
Def
-
Leatherman came up with a solution to a problem.
I sometimes think that Victorinox comes up with solutions that are in need of a problem.
If MTo is to make a tool.......or thing....what is the problem we want to solve?

-
I would like a OPT that is not overloaded. Only: Prybar, slot for bits and wrenches (open end!).
For regular tools I see me more and more looking for something that supports torx screws. The only one coming to mind is the Cybertool, and I don‘t have one of those.
Other than that I would like an MT that is more modular. Yes I know it is hard do, or the big 3 would have done that already. Would still be cool

-
@Nix said:
Leatherman came up with a solution to a problem.I sometimes think that Victorinox comes up with solutions that are in need of a problem.
If MTo is to make a tool.......or thing....what is the problem we want to solve?

That's well put. I am not against any project MTo plans to undertake collectively, but realistically, we gonna think about feasibility and economics.
I still think the hanky or pocket organizer are great executable ideas, and if done nicely, could get our name out on instagram/internet.
-
Gino88, though not a charter member, had a great idea I think worth considering:
/post/2066707
A 75-80 USD donation spreads into small monthly subscription fee, mean while, member gets 35-40usd worth of SAK or LM tool with exclusive color or special edition. It's a win-win for everyone.
-
@comis said:
Gino88, though not a charter member, had a great idea I think worth considering:/post/2066707
A 75-80 USD donation spreads into small monthly subscription fee, mean while, member gets 35-40usd worth of SAK or LM tool with exclusive color or special edition. It's a win-win for everyone.
If we had the up front cash to commission a run like that and then sit on it for whatever length of time we had to, it might be worthwhile.
Unfortunately at this time, we don't.
I had an idea the other day that I think we could all get on board with. What is the #1 problem with EDC stuff?
Someplace to carry everything.
Sure, you could get a Skinth or a Maxpedition bag or something, but what about a truly compact and customizeable EDC carry method?
I'm thinking we build a small box, similar to an Altoids tin, but with different features like:
- Waterproofing
- Interchangeable mounting option for belt clip, MOLLE, carabiner etc
- Removable bit holder so you don't have to carry a bit set with your multitool
- Internal removable dividers for organizing smaller items like FAK things or batteries for flashlights
I'm thinking it would be relatively easy to design a small box with a removable lid, have a recess in the lid for an O Ring to seal it and then use a silicone wrist band (or similar) to hold it shut.
It would be easy to prototype a few of them, send them around to get feedback and go from there.
Thoughts? I have others if this one doesn't turn anyone's crank. :D
Def
-
I like the box idea.
When I kayaked more regularly, often solo, I thought it would be a good idea to pick up a way to carry, protect, and preserve a cell phone. Back then I used a small flip-phone and this little box fit the bill (IIRC):

It is fairly small, but indestructible. The lid crushed the rubber liner down to make it waterproof. There is even a small pressure valve to accommodate a decrease in atmospheric pressure. Downsides are that it does not hold much for it's size and is also a bit heavy.

I think I ended up just chucking the phone in a roll-top dry bag.

Still the box idea is compelling because it offers more protection than a soft-sided solution.
-
Pelican or Otter Box is exactly where my mind went, too. Back when our phones weren't also our cameras, I carried my camera in one of these on paddle trips.
Personally, an MTO-branded thingie like this isn't inspiring to me, but if it supports the forum and Grant's amazing efforts at keeping this community going, I'd get one.
Myron
-
The downside of my 1010 is that it is too small now.
But.....bigger means bulkier and heavier. I have another gear box around here some where.....I'll try to dig it up and discuss pros & cons at some point.
-
I was looking for a project we could all get a hand in- if the box idea isn't popular (and it sure looks like it isn't, judging by the landslide of responses! :D) then I am willing to keep looking.
I do have a couple of other projects in the works, and one of which I may ask for some help with eventually, but in the meantime, here are a few other concepts I have been bouncing around in my head for a while. See if anything here stirs any interest, and, if not, hopefully we can come up with some other ideas!
-
Pocket chainsaw- basically this would be a small chainsaw the same size as a small fixed blade knife. Figure 4-6" blade, battery and switch in the handle, powered by a drone motor.
-
Different Tread links- I floated this idea before and even did some basic design work.
Retractable Handcuff Key:

TreadLight:

-
EDC Holding wristband- many times I have been trying to fix something, which involved holding something with one hand while trying to grab a tool with the other. With this wristband idea, you'd have a 4 inch (or so) wristband with MOLLE straps on it so you could clip a tool, SAK, flashlight etc to it and always have your tools handy when you need them. You could also stick the flashlight to it, with it pointed towards whatever you are working on to have hands free light.
-
iEDC- basically a set of dice that would connect to a keychain. You could use them for gaming, passing the time or have the faces engraved with something like Leatherman, Gerber, Wenger, CRKT, SOG and Victorinox to help you decide what tool/knife etc to carry that day. and iEDC is an anagram of DiCE, so the marketing is already done! :D
-
Another repeat, the Multitool.org Pot Holder
Def
-
-
Okay, apparently those are some pretty bad ideas....

Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login